No video
This Arcade Machine is hidden in plain sight! And This is how I Built It!
Рет қаралды 523,922
Күн бұрынCheck out www.kiwico.com... and get 50% off your first month of any subscription!
I'm making a fully functional 2 player arcade machine, discussed as a sleek piece of furniture!
For the build plans and 3d files for this project and many others, check out: www.alch.shop/
If you want you can support me on Patreon: / chappel
Follow me on Instagram for more pictures and stories along the way: / a.chappel
A couple of videos to help you out:
installing retropie: • How To Install And Set...
running games from usb: • RetroPie Run Roms / Ga...
programming a power button: • How to Add a Power But...
List of all the things you'll need for this build:
Raspberry pie: amzn.to/3rUBLVC
Monitor: amzn.to/2NmH41h
button and joystick: amzn.to/2Q3Es9n
clicky buttons: amzn.to/3qPV0hV
USB extension: amzn.to/2NjUqeu
HDMI cable: amzn.to/2OZGLJX
USB stick: amzn.to/2ODecT1
micro sd: amzn.to/3qRT0Wv
Power supply: amzn.to/3qM0j1H
The actual speaker I used: www.biltema.no...
A similar speaker from amazon that could work: amzn.to/3bPtgpc
Crimp terminals: amzn.to/3toOY9w
Crimp tool: amzn.to/3qKyGWU
Wire stripping tool: amzn.to/3qNwmhP
Spring: amzn.to/3cCsf2X
brass rod: amzn.to/3qRCFko
closest switch I could find: amzn.to/2OzeZ7r
Momentary switch: amzn.to/3ll4h0r
Some of my favorite tools:
my favourite 3d printer: shareasale.com...
super glue: www.starbond.c...
Small vacuum forming machine: amzn.to/3kiV3Qd
Japanese hand saw: amzn.to/2QcLUMo
Olfa knife - amzn.to/3hXRzBT
machinist square - amzn.to/3hORmkc
combination square - amzn.to/39HSlji
Pocket hole jig: amzn.to/3eXGcM3
Biscuit jointer: amzn.to/333GzfY
Orbital sander: amzn.to/2xglSBs
Track-saw: amzn.to/2Q07Bj7
Drill: amzn.to/3cKVXCr
Impact driver: amzn.to/2VZFGDp
Jigsaw: amzn.to/2vQtbj1
Biscuit jointer: amzn.to/333GzfY
Mitre saw: amzn.to/3b3QBkY
By using these links I may earn an affiliate commission, which helps support the channel.
Thank you for Watching! Tune in next week for more videos :)
@Psychlist1972 3 жыл бұрын
The sound of your components clicking into the 3d-printed panel was extremely satisfying.
@DIYBuilds 3 жыл бұрын
Awesome. And yes I was wondering about the corners.
@janosnagyj.9540 3 жыл бұрын
Me too. Nice that he didn't tried to hide it, but confessed us the truth about it :)
@nw6gmp 3 жыл бұрын
Me three!
@mtaschii 3 жыл бұрын
@@janosnagyj.9540 VfL
@Dr0wn3dGirL7E7 3 жыл бұрын
Yes Yes I am in town and I’m just leaving now like a couple ouotouo osou for a little while I’m not there yet I have a few minutes I’ll get it done I have some of that work out I have a couple zombies
@endoflevelboss 2 жыл бұрын
Some good DIY skills there manbun.
@SamuelRowan 3 жыл бұрын
I've been wanting to do this exact thing for a decade. Glad to see someone's doing it
@pickardsr Жыл бұрын
Okay folks - if you are in Australia, 18mm plywood is more common. The best way to tackle this is to make the side frames measure 210mmx598mm and the top frame 210x574m. The setout dimensions for hinge holes etc will need to change. All other dimensions can stay the same. Haven't built it yet, but did sketch it out in 3D to check the impact of changing to 18mm thick ply. Hope it helps! Glad I could support this awesome project by buying the plans!
@AlainPilon 3 жыл бұрын
Very nice looking but I think the controller table should have a small angle, not 90, and have a round over to not hurt your wrist/forearms. Also I would be worried about someone getting too much into the game and applying to much pressure on the controller table, since the screen section is acting as a stop, it will absorb all the impact and will eventually break.
@hed420 3 жыл бұрын
These would actually sell well. You should do a small production run.
@dustinm2364 2 жыл бұрын
You could do that too...just saying.
@hed420 2 жыл бұрын
@@dustinm2364 Yes, I've thought about making and selling this and other things but the problem is that I live in South America so shipping to the USA would cost more than the product . Otherwise I would be selling things on etsy. I could sell these locally but they won't sell well because people here either can't afford it or have more important things to spend their money on like food and rent . So unless shipping becomes more affordable, or if the client is able and willing to pay for the high shipping prices, I'm out of luck. Ideally, it would be awesome to find someone to fund me to make a container full of these, ship them to an Amazon warehouse and you could just order them straight off of Amazon with free two day shipping to your door. Since shipping these in bulk would help reduce the shipping costs significantly .
@kaysonkeyte5032 3 жыл бұрын
You should put a clock in the background during your time lapses, so we can tell how long these projects actually take. Great video by the way
@JerkerMontelius 3 жыл бұрын
Beautiful. The only thing I would add is something That slows down the opening (so it don't hit you in the head)
@cavemanvi 3 жыл бұрын
the last front panel was supposed to be transparent to show the inside off in my opinion. the cable setup is art
@Arterexius 3 жыл бұрын
Modify the dowel rotation prints to consist of internal gears. That or buy some small gas compression "hinges".
@KeyshawnJenkins 3 жыл бұрын
@@cavemanvi But it's meant to be hidden.
@j0j0biwan 3 жыл бұрын
Small idea after seeing your video: you can make a fake frame with a retro poster with the plate that hides the electronics, even more surprise for those who will come in your workshop when you want to show it :D !
@kamathonxander1 3 жыл бұрын
Dude... your projects, your video production, your energy while presenting. All’s always top notch! Keep going!
@modcolocko 3 жыл бұрын
PUT A HEATSINK ON THE PI AND CONNECT A FAN! The new model overheats and that can be bad, like really bad.
@GustavBrogren 3 жыл бұрын
Nah, it just throttles the CPU when overheating. A tiny fan is good though to avoid throttling.
@snoopyslr 3 жыл бұрын
Good suggestion. Honestly 2 small 40mm Noctua fans would be good for the entire electronics section. Silent and all that stuff needs is just a tiny bit of air flow. All my Pi cases have 20mm fans on them with heat sinks.
@modcolocko 3 жыл бұрын
@@snoopyslr Yeah, heatsinks for the pi and quite noctua fans would be the least intrusive option
@miklschmidt 3 жыл бұрын
Also i saw an under voltage warning at the end, make sure it gets at least 5.1V and that the wires are thick enough to support 3A!
@UnboxMe 3 жыл бұрын
woooooo u are amazing! 🤯 Fantastic job 👌
@Bullsnation6 3 жыл бұрын
I appreciate that you even cable managed your electronics. Now that’s attention to detail.
@horisontial 3 жыл бұрын
I am glad I only had to be a master carpenter and not a newbie coder to make this :D
@Arterexius 3 жыл бұрын
You do not need to be a master carpenter. If you can't build a box, you'll have no success in carpentry, whatso ever. Building a box is literally the very first thing you must learn how to do. Fail at that and you will fail at everything else in carpentry.
@ryanivester5042 3 жыл бұрын
Totally awesome build. Never stress about or underestimate pocket holes. I know lots of woodworkers frown on them or say they are "traditional joinery". Lots of antique furniture that is beautiful has pocket holes. They were just hidden better than they are now. I use them alot for their convenience and strength. Love you videos and would love to see a full lathe rebuild/restore one day.
@rosslovett3779 3 жыл бұрын
Pixel perfect yet again. Liked the use of 3D printing to make the cable management
@johnnyking2965 Ай бұрын
Pocket holes are really strong. Especially with glue. They've been used for generations. Great build.
@David-yp7bk 3 жыл бұрын
Man, I can't tell you how happy I am to see your work, the amount of detail, precision, and thought that is in your projects is mind blowing. Keep up the amazing work!
@serverakinci4231 3 жыл бұрын
I swear, this guy impresses me with every upload.
@Xander-228 3 жыл бұрын
0:04 for some reason my brain ignored him saying "this video is sponsored by kiwi co." and it focused on his McCafe. Then I saw the KZfaq "includes paid promotion" and I went straight to "oh, this video is sponsored by McDonalds"
@xtonybaloneyx 3 жыл бұрын
that McCafe is lowkey promo..
@nw6gmp 3 жыл бұрын
RIGHT!? 🤣🤣
@jap7384 3 жыл бұрын
he drank it like someone had just turned the camera on without him knowing
@SpencerPaire 3 жыл бұрын
I never play arcade games, or even console games these days. But now I really want to spend a bunch of money and make this.
@Helveteshit 3 жыл бұрын
Can always load up other emulator games. Just a matter of what functions the buttons should have, really.
@briant6669 3 жыл бұрын
I had more fun building my arcades than I do playing with them.
@rhyzenderaya175 3 жыл бұрын
Watched all ALCH videos... 3d printed parts are my fave!!! Hope you can see this
@LesTutosdUneMinute 3 жыл бұрын
Very very nice! True Scandinavian design! The hinges seem a bit fragile tho - maybe replace the wood dowels with metal rods?
@achappel 3 жыл бұрын
I think they'll be fine(famous last words), In addition to the wooden dowel, there are also four screws on each side to hold everything in place.
@richierichwalker 3 жыл бұрын
I have the same feeling that the hinges won't hold, even with metal rods. The traction is too big here. When I'm thinking of how we used to beat up these buttons when we were kids...
@flymypg 3 жыл бұрын
@@achappel Would you sit on it to load-test the hinges? It seems everything else would take your weight!
@lobitome 3 жыл бұрын
The same leftover brass rod instead of dowel.
@Arterexius 3 жыл бұрын
@@flymypg That might only be a good idea if he has screwed in the french cleats to the studs in that wall, as that wall is drywall
@iamuzairahmad 3 жыл бұрын
i am just in love with this guy. just seeing that he has uploaded today made my day. now watching the video with a big smile on my face. i found my perfect youtuber
@marsgizmo 3 жыл бұрын
Love this project Alex! 👌😎 Excellent build!
@SeanHodgins 3 жыл бұрын
That is beautiful!
@cavemanvi 3 жыл бұрын
the last front piece should be transparent its so nice inside.
@DevanshMatha 3 жыл бұрын
"Those are my choices and i just have to live with that" Alexandre Chappel
@RicardoJunqueira Жыл бұрын
That actually looks quite nice. The 3D printed panel you did for the power cable and other connections looked impeccable. And the whole unit is not only solid but also incredibly slim. Congrats!
@lifestylemodificatio 3 жыл бұрын
With all the negative things going on in the world, this put a smile on my face. Thanks 🙏
@PieterF 3 жыл бұрын
Great designing as well aesthetically as functionally. This is exactly why I subcribed to your channel. Not to talk about your cable management skills. I definitely can apply some of your ideas in my next projects in the future. Thank you for making these videos.
@showmeyourkitties 3 жыл бұрын
Ultra disappointed I didn't get to hear, "Biscuit, biscuit, biscuit!" 😹
@lawaskamal5944 3 жыл бұрын
East upload video early I can't wait
@walnutz03 3 жыл бұрын
My son loves his kiwi co crates he gets so excited every month when he sees the box in the mail
@fluffycritter 3 жыл бұрын
I'd be concerned about that hotglue being enough to keep the monitor from falling out internally. Wouldn't it make sense to add some screwed-in angle brackets behind it for some extra support?
@LeeMooEez 2 жыл бұрын
You’ll be surprised by how strong the hot glue actually is if glued properly 😂
@beaucephus526 Жыл бұрын
@@LeeMooEez any adhesive is highly subjective to the environment. Humidity. Temperature. As well as the materials it’s bonding.
@miningbruno 3 жыл бұрын
That dowel that is functioning as a hinge, it is not meant to take a shear load like that, especially if you're resting your forearms on it. Furthermore, as you open-and-close it, the dowels will quickly wear out. And good job on that wire loom, it's very tidy!
@dylanorr3017A 3 жыл бұрын
Amazing build if you are running retro pi on the raspberry pi you can remove the usb stick and the rooms will work just like normal.
@paulheitkemper1559 3 жыл бұрын
props to you for being honest about the corners. You could add a side-channel video where you show a repair.
@ExcalibursZone Жыл бұрын
Dude, your sheer joy and energy while making always brings a smile to my face and brightens my day. This is an AWESOME project! I've seen a few other builds like this and am really enjoying this current trend in hidden arcade systems.
@Tomyy1001 3 жыл бұрын
The only problem is wooden dowel hinge, especially when two players are playing combat games such as street fighter 🔨⚡🧨💥🎇
@jmsiefer 3 жыл бұрын
Looks cool, but I wouldn't feel comfortable with the amount of downward weight.
@Darwinion 3 жыл бұрын
I was thinking that. What would Track and Field play like? :p
@joeycameron4744 3 жыл бұрын
yep, i was thinking the same thing. Static it may be fine, but once people start putting downward pressure on it when playing, that seems like a pretty weak failure point.
@KeithHuffstutler 3 жыл бұрын
Yeah, from an engineering standpoint, there isn't much difference between those 3D printed 'hinges' and just a hole in the wood. Actually, probably less strong. Considering he wanted to make this look like it didn't have any fasteners has really limited it. What he could have done was an inset block with a steel rod that went the length of the cabinet. Also, a piano hinge of some type may have also worked.
@sinetwo 3 жыл бұрын
You could also have a other part flip down and support against the wall at the bottom
@Suraj_Mandal. 3 жыл бұрын
Sir, you are genius i hope one day i can meet you and play with you there at your workshop......lots of love from INDIA
@olehellmers5439 3 жыл бұрын
Awesome build! For the locking mechanism: you can 3D print a knob, pause mid print and insert a bolt. This way you can get 3d printed parts with metal bolts inside :) just make sure to add a support structure underneath that allows the bolt to be inserted or use z hopping to print around it :) (and use a hex screw of course) I did this with nuts to make my own knobs that are easy to turn with your hands, look great and have text on them :-)
@ilikewaffles3689 3 жыл бұрын
Thingiverse link?
@thefirsttrillionaire2925 2 жыл бұрын
Any thingiverse updates?
@DIYTechRepairs 3 жыл бұрын
And yes those buttons with microswitches in the button is so much better quality in. Built some mysels and i use those buttons for light switches in the house with RGB leds inside to show status of the lights :D
@markweaver1963 3 жыл бұрын
Superb idea and executed to perfection. I nominate myself as the winner of whatever it takes to become the proud new owner of that technological marvel.
@beedee95 3 жыл бұрын
These projects, the attention to detail, everything is just next level. Hats off, Sir.
@crazedskirge287 3 жыл бұрын
Stepping outside the normal script and mixing up some different skills. Haven't started this video yet but I can't wait to watch the whole thing.
@zaharajohn8482 3 жыл бұрын
This is the most coolest thing you had made so far
@daunit5493 3 жыл бұрын
WOW this amazing and unique!!! Love it
@anthonyprokos5098 3 жыл бұрын
Alexandre that last comment resonates with me so much. I always find a way to mess up a project at the very end.
@mathijsbremer4093 3 жыл бұрын
Love your enthousiasm, thats what makes you stand out of all the comparable channels for me.
@TheKurtsPlaceChannel 8 ай бұрын
Very entertaining and fun to watch. Thanks for posting this.
@darkDRAGONmind117 3 жыл бұрын
Serious. I mean really serious, I like how normal it is for you to insert a 3D-printed funktional part in your projekt. Please never change that.
@scottmorris4914 3 жыл бұрын
Nice job, looks really good. I have a concern, heat. There is no ventilation for any of the electronics. The monitor creates heat, and so does the electronics for the RPi. May not be an issue for short use, but if you have a party, it could get hours of use. There are links to how to help with heat on the RPi (heat sinks, etc). Just my thoughts.
@TheSmugglersRoom 3 жыл бұрын
Fantastic build!!! Wonderful job on the wiring and organization as well. Thank you for this awesome project!
@xeygar 3 жыл бұрын
This is insane man, the fact that you can build so much just in your shop. The force is strong with this one.
@ollien3359 3 жыл бұрын
The wiring is so beautiful, I would have made the backing clear perspex so I would admire it on the wall!
@jakebrickhouse 3 жыл бұрын
Bro! That is soooo clean. You are on a whole other level.
@jordski81 3 жыл бұрын
That's so stylish!! I love the look of the monitor in the frame.
@YannRetout 3 жыл бұрын
Excellent work! Now I need to find an available wall and convince my wife that we need this!
@NWGR 3 жыл бұрын
Genius idea! I've been wanting an arcade cabinet forever, but not the space nor the room to build one (tiny shop). I'll definitely be building my own take on this. Thanks for posting!
@jamess1787 3 жыл бұрын
On our way to 1M. Way to go! Whoop whoop!
@antonnym214 Жыл бұрын
Outstanding. You are an artist! Even all your wiring is very neat, like a factory build. Thank you! Great fun! All good wishes.
@youvj03 Жыл бұрын
for someone who does more with wood, your wiring is fantastic. Good job buddy.
@edale2 3 жыл бұрын
Two adjustments I'd make: 1: Have the door portion open a bit more, so it's at a bit of an angle. Maybe give it 20 more degrees? 2: Reposition the buttons to match an actual arcade machine's button layout, as it's more ergonomic. and I suppose 3: Add a marque screen. above the main screen.
@theawesomer 3 жыл бұрын
Great build! Sharing on The Awesomer.
@sadovsf 3 жыл бұрын
I would maybe advice some small heatsink on Raspberry. It may get quite hot especially in closed space like this
@dgooglr 3 жыл бұрын
Awesome!
@DaniPacha 3 жыл бұрын
Awesome job!!! Like always ! Super clean build! And great edit . Is a pleasure watch your videos. Well done!!! You make it easy !
@joeylo2365 3 жыл бұрын
This is really super awesome and I really want to build one for my kids and myself, so cool!!
@denniss1618 3 жыл бұрын
That one is just amazing... The work you put in there gorgeous
@AndriiPetrusha 3 жыл бұрын
This is so so so so so so so cool!!!!!!!
@sddiymakeitworthit7512 3 жыл бұрын
So beautiful and brilliant idea 👍 it
@justinskywalker 3 жыл бұрын
Awesome build!
@davefrancis4529 3 жыл бұрын
Came out awesome. Very understated.
@thomaswiley666 3 жыл бұрын
In my setup: - Spring magnetic latches on top of the unit. Press to let go of the controls frame; press to connect back - Spring hinges (or other compression hinge) on the bottom to slow the descent of the controls frame so that it doesn't just drop. And of course, thank you for putting one of these together! I would not have made these suggestions if you had not put in all the hard work to making this a reality.
@BLBlackDragon 3 жыл бұрын
Most excellent. You usually only see these as tabletop units. Nice option.
@janmartens7954 3 жыл бұрын
You build this so perfect, i am glad you told us the last bit of the damaged corners.... otherwise you giving me a complex with you perfectionism hahahaha
@akasthien 3 жыл бұрын
Really nice build! You could also use magnetic snappers for the removable front to make it a bit easier!
@Cicada-uv5se 3 жыл бұрын
Best channel ever! Wish I had a 3D printer though so I could make some of these awesome projects.
@ilposto7489 3 жыл бұрын
Nice work man 👍 thanks from Italy 🇮🇹
@atomicwatts 3 жыл бұрын
Here I was thinking about how I could build a cheap spring release for a project - I take a break to watch this video and boom - a great design near the end. Thanks for the inspiration!
@sunshine135 2 жыл бұрын
May I just say that your craftsmanship is impressive.
@TheCHRISCaPWN 3 жыл бұрын
This is so slick. I have built several arcade machines, but never thought of a slick design like this. I'm definitely adding one to my house!!
@P0LSKI Жыл бұрын
Absolutely incredible!!!
@DIYTechRepairs 3 жыл бұрын
Pocketholes are great! That in combo with good glue
@paoloangioi 3 жыл бұрын
Simply AMAZING!!!
@DanielSantosCalderon 3 жыл бұрын
DAMMMMM I LOVE IT, ANOTHER IDEA FOR MY SHOP!
@ozespresso 3 жыл бұрын
Great build!
@javier-pr3mr 3 жыл бұрын
amazing idea.
@KeithOlson 3 жыл бұрын
Nice build! A few thoughts: 1. Add a couple of recessed buttons on each side near the front and one one the front-right for pinball machine emulation. 2. Drill out the hole for the catch a little larger and insert a small piece of (flared, preferably) copper tubing. That will prevent the brass pin from wearing out the wood. 3. Add a handle near one edge of the (closed) front to both make it look more like an cabinet and give you something to hang onto when removing it. (To protect that last corner. :grin: )
@grahamjones7814 3 жыл бұрын
Another great space saving design.
@mandem9319 3 жыл бұрын
How did I almost completely miss this video?! Really glad it eventually got recommended to me regardless of not noticing it at first...
@g43s 3 жыл бұрын
17:42 im no electrician or electronics geek but this looks amazing haha, so tidy and organized 10/10
@nainja116 3 жыл бұрын
Det er rart hvordan man kan bli så hypet av en KZfaq video, du er faktisk helt vill mann, elsker videoene dine 😭😭😭
@hoppend 3 жыл бұрын
So good! What a nice and sleek looking arcade kabinet!
@TheMrJong 3 жыл бұрын
Oh man!!! You are the best!!!!
@PaNDaSNiP3R 3 жыл бұрын
This is perfect. I’ve been sitting on my raspberry pi and joysticks and buttons for a couple years now. This is something I think would be perfect. Now all I need is to win the lotto so I can buy some wood. 2021 for future readers so they know wood it’s like gold now 😂
@fred.chapman Жыл бұрын
This is a masterpiece of design and craftsmanship! Thank you for sharing this incredible build with us. Enjoy your games, Alexandre!
@threeDeeBeginner 4 ай бұрын
this is the perfect setup, easy to play, that's the purpose of arcade games
@tomking8315 11 ай бұрын
Thanks for this btw I made one last year after getting your plans, I made a few slight modifications of which was a switch that tuns on the power as the cabinet opens! also did mine in all black with decals and added a volume knob in the middle by the controls
@peacock777 2 жыл бұрын
Super! Thank you 🙂
Garena Free Fire Global
Рет қаралды 10 МЛН
Alexandre Chappel
Рет қаралды 287 М.
RetroBuiltGames
Рет қаралды 105 М.