Acrylic blanks to make LED Lamps without etching!

Рет қаралды 22,599

3 жыл бұрын

Hestia's 3mm Acrylic blanks used for making LED lamps without laser or Cricut etching. We use frosted paint to show you a quick easy way our getting a custom LED light with our acrylic blanks. You can find our blanks in many shapes in our Market place.
The best place to order is from our Website here:
makeso-marketplace.myshopify....
Please join us on our Facebook group to discuss crafting topics here:
/ about

Пікірлер: 40

@DB-uu6yl 3 ай бұрын

Thanks for sharing, I dont have an engraver and this will works as an alternative option for me

@cindyb9288 5 ай бұрын

Awesome

@lesjames2478 2 жыл бұрын

This is....great. It is super useful for those of use who can't afford high end equipment

@rebeccatempleton6638 3 жыл бұрын

Thank you for sharing this method. I gave it a go today and I'm so thrilled with the result.

@Makeso-Hestai 3 жыл бұрын

I glad you got a chance to try, so easy and changeable as well. I also think it frees you up for more creative designs as well!

@donnagiltner241 8 ай бұрын

I love your video. I did my first one this week. It is a Christmas gift for my great nephew. What is the best way to clean these to get the finger prints off. I would like to give him an instructions sheet and include the cleaning process. Thank you again for the great video.

@jackdaniels8898 3 жыл бұрын

Very nice. Thanks for sharing this unique process for the LED edge lit effect.

@albertovera5113 2 жыл бұрын

nice tutorial carl winslow

@TheresaPigula 2 жыл бұрын

OMG I was thinking the same thing instead of engraving! Thank you for confirming this. Very cool. 😁👍🏻

@ShamirAjate 2 жыл бұрын

This video was great! Thank you for sharing

@lana6335 2 жыл бұрын

VERY GOOD IDEA! THANK YOU FOR UPLOADING... 😃

@Bradamsmx5 3 жыл бұрын

I already have a laser engraver, but this is an awesome alternative way to get the same effect. Thank you for the information.

@Makeso-Hestai 3 жыл бұрын

I have an Epilog Helix as well you can't beat a laser if you have one.

@hermansugiharto7543 2 жыл бұрын

Thanks for sharing

@sancamps 3 жыл бұрын

Olá sou do brasil e adorei seu vídeo. Usei o tradutor , mas agradeço pela sua fala calma!!

@mikeledee8786 11 ай бұрын

The led base that I buy are for 4mm, where do you buy the 3mm base? Thanks

@HKYT649 Жыл бұрын

nice....

@ValYo0623 Жыл бұрын

Thank you for this video! How can you seal to make permanent?

@zubairally7625 3 жыл бұрын

Hiya, how do you prevent bleeding of the frosting under the cut out

@Makeso-Hestai 3 жыл бұрын

It will depend on your masking, if you use a good one then you should end up with a nice line with no bleeding, however, if you are having issues there are different things to try: 1. If it is hot try cooling down your space so that the masking doesn't lift. 2. You can apply Mdd Pog around the edges of your masking so the "first bleeding will be transparent. 3. You should make your first coat a light one, dust the paint on first and allow it to dry, this will also seal your edges for your next coat. There are so many things that can impact your masking that you might find one or a combination of the above helps you.

@jenniferlucca4978 Жыл бұрын

Does it comes off if decided to wipe with windex like removing finger prints. ?

@didiomartinez4471 Жыл бұрын

Have you tried spraying polyurethane to make it permanent? Does it make a difference?

@JavierFernandez-tx4vf 2 жыл бұрын

How deep did you set the blade on cricut machine ? or what setting you put on ?

@Makeso-Hestai 2 жыл бұрын

It’s just your regular vinyl setting

@kamals3582 3 жыл бұрын

does this spray give enough opacity that you can see through where it was sprayed?

@Makeso-Hestai 3 жыл бұрын

The spray is made so that you can see light and shapes but you cannot see through it. Sparkle Decal works as well.

@acelobos 3 жыл бұрын

Do you think we can achieve a 2-tone effect by applying heavier/lesser coats to create the contrast? by use 2 stencils?

@Makeso-Hestai 3 жыл бұрын

I think it is possible just a little, frosted glass is normally a " is or isn't" thing, it could be possible to add color which might give the layered effect as well. We would need to try it.

@Makeso-Hestai 3 жыл бұрын

I saw you asked how long does it lasts but can't find the post. It should last years as frosted glass does, it shouldn't come off unless it's being rubbed against

@pallana3701 2 жыл бұрын

So how did u get the decorations inside ? Did u say u used the Cricut machine

@Makeso-Hestai 2 жыл бұрын

A Cricut or Cameo would work or even a reusable stencil

@faithedwards1028 2 жыл бұрын

Where is the best place to buy the rounds

@Makeso-Hestai 2 жыл бұрын

We have them on our Hestai Etsy shop

@jerrysayers4002 3 жыл бұрын

Very new at this do you have a video on what is , and how do you make this "MASK" you talk about on this video ? Than you for any information you can give.

@Makeso-Hestai 3 жыл бұрын

Sure can the mask is just a stencil or some covering to block the paint and create the design, I will get a quick video up for you this week.

@jerrysayers4002 3 жыл бұрын

@@Makeso-Hestai Thank you

@ChaunaCasteel Жыл бұрын

@@Makeso-Hestai Did you cut the “mask” with your Cricut?