Collin's Lab: Hand Tools

Рет қаралды 119,447

Күн бұрын

Cutting, gripping, measure, and more - join Collin as he takes stock of essential handheld tools needed for the construction, manipulation, and inspection of all things electronic.
Assortment of Hand Tools
www.adafruit.com/categories/83
-----------------------------------------
Visit the Adafruit shop online - www.adafruit.com
Subscribe to Adafruit on KZfaq: adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: adafru.it/showtell
Watch our latest project videos: adafru.it/latest
New tutorials on the Adafruit Learning System: learn.adafruit.com/
Music by Collin Cunningham: / collinmel
-----------------------------------------

Пікірлер: 89

@edgeeffect 5 жыл бұрын

There needs to be much more of Colin on KZfaq.

@IanPageEchols 8 жыл бұрын

I heartily recommend the automatic wire strippers. I've saved so much time using them instead of normal ones. I wish I had known about them earlier.

@chriswebster39 8 жыл бұрын

I love Collins videos. I'm hoping for many many more. They're great because they are informative with an element of comedy. thanks Collin, You're the best!

@tschofield7772 8 жыл бұрын

He's back again! Yes. I like this.

@howardschwicht9510 7 жыл бұрын

I discovered Collin's videos researching soldering. What an awesome presentation. I just had to share with my friends. Thanks for all these videos. Keep it up.

@mattgold2118 4 жыл бұрын

Killer tip that, the heat-shrink on the gator clips! Thank you!

@nevalode3240 7 жыл бұрын

If you take care of your tools., theyll take care of you...

@garyvaughan2648 3 жыл бұрын

Well done. Love the extreme yet suttle humor.

@ARMYStrongHOOAH17 4 жыл бұрын

1:55 😂 This guy is actually just an electronically savvy comedian, really.

@AlexRubio 8 жыл бұрын

Colin's Back baby!! whos the sad individual who thumps down this!!

@imho2278 3 жыл бұрын

They're jealous.

@johannfr 8 жыл бұрын

One thing that can't be emphasized enough, related to the last point about taking care of your tools, NEVER use your (component lead) cutters to cut anything but component leads or really thin wires. I have seen people trying to chew through a nail with them.

@dawson345 8 жыл бұрын

More Colin!

@thomasalexander1563 7 жыл бұрын

Colin lab,, Short but very usefull,, Cover every tools that we need..

@GlitchyBastard 7 жыл бұрын

Thomas Alexander That's what she said.

@audioguitarman 8 жыл бұрын

These are great little primers, cool stuff.

@rwoodfolk 8 жыл бұрын

Love Collin's videos...

@igrewold 7 жыл бұрын

Great work Collin, keep it up, especially the looks! ;D

@naderhumood1199 5 жыл бұрын

Wow I love these tools Doctor

@Lazarus_G 8 жыл бұрын

Always up-vote Collin!

@FrequencyBender 8 жыл бұрын

Yay! Awesome to see you're back! :D

@NathanaelNewton 7 жыл бұрын

This video style is very aesthetically pleasing..!

@PrinceAzeemPlatinum 5 жыл бұрын

You mean aesthetically asmr?

@gh0st_papa811 8 жыл бұрын

finaly new vid thanks

@kevfrets 8 жыл бұрын

Thanks Collin!

@simplecastic 8 жыл бұрын

Collin is awesome

@nemesisc6122 8 жыл бұрын

I love Collin!!!

@jjfoerch 5 жыл бұрын

Collin cracks me up. I'm on his humor wavelength.

@AJKandK 8 жыл бұрын

Us Cunninghams' do love our Tools.

@tpm4life 8 жыл бұрын

Mr Personality. keep up the good work

@xanokothe 8 жыл бұрын

Yeah Collins!

@dandearman2871 3 жыл бұрын

Love that Panavise stuff.

@GraceSerenityK 8 жыл бұрын

That was a sweet Ghostbusters II reference! I'm glad I was the only one that completed the lyrics in my head!

@milky1234123 8 жыл бұрын

This man is my idol

@simonhopkins3867 8 жыл бұрын

Thanks dude. Happy New year. ;-+

@naderhumood1199 5 жыл бұрын

You r Master of Electronic I like your channel Sir

@ELECTROxigeno76. 3 жыл бұрын

I Love Tool's,

@RonTG_MediaArts 8 жыл бұрын

good stuff. I'll need to show this to my class. please consider something on micrometers for my engineering class.

@thespritman4052 8 жыл бұрын

Love the ending

@mrmjordan 8 жыл бұрын

Keep em' comin'

@doxielain2231 8 жыл бұрын

Yay, Collin!

@Scrivscribe 8 жыл бұрын

I enjoyed this video. I thought I knew all this, but sometimes it's good to go back to basics I guess! :D

@QuintiMa 8 жыл бұрын

Yeeeah the return of One pun man!! love it!

@domobrah2671 5 жыл бұрын

Too hot to handle. Too cold to hold

@PieterBos 8 жыл бұрын

strangely relaxing video ;-)

@ericberger4511 8 жыл бұрын

Collin rocks

@TocpShadow 8 жыл бұрын

Master!

@gorden123w 8 жыл бұрын

Collin

@tyskstil 8 жыл бұрын

Hi Collin, I have a request for a video: Could you do one on demystifying the concept of ground? People usually say "well you can't talk about 5V without specifying relative to "what", and that "what" is ground". However, what does than mean for my actual circuits? What about when my circuit requires +--5V, and is battery powered? What if I don't have a metallic case for my circuit to ground to? Cheers J

@domobrah2671 5 жыл бұрын

Woah the sleeves came UP!

@AerikForager 8 жыл бұрын

I almost thought that was punintentional... almost... Happy New Year!

@madjanx 8 жыл бұрын

Channeling your inner Bobby Brown, I see. Thanks for the video; it's very helpful!

@richmanfireyricxdivjah 6 жыл бұрын

Muy bueno gracias :)

@IchMagandMeGusta 8 жыл бұрын

Huh. So this is what Alton Brown would look/sound like if he went the electrical engineer route

@mangoforkids1263 3 жыл бұрын

Or chucky from rugrats

@mikelemon5109 8 жыл бұрын

Where have you been? Great video BTW was missing your videos.

@guerra_dos_bichos 8 жыл бұрын

i wish i had steady hands to do such a job, shaking makes fine movement really hard

@snorky2k521 7 жыл бұрын

I don't disagree with him. However, I found that some Hartmann alligator forceps (I have also seen them called ear polypas) are very handy in assembling electronics when you drop a tiny screw in a hard to reach place. There are versions of these that can fit through a 1/4 inch hole and grab something up to 1 foot on the other side. Unlike hemostats, only the end opens like a little alligator mouth. They are every bit as handy for small electronics work in the case as they are for performing surgery in the ear.

@4647540 6 жыл бұрын

Ha ha 😂 good line "if you take care of your tools, they will take care of you" ....👍

@simonhopkins3867 8 жыл бұрын

Hello Colin as you see to love making music and arduino. can you recommend any ic's that are not to complicated to get some interesting sounds out of with or without arduino. Thanks to anyone who answers this. Si ... P'S not 555 or 556 ;-)

@MikeM8891 8 жыл бұрын

Collin, in his transition to beardedness.

@miguelito0o 8 жыл бұрын

Gotta love the intro (still retro) music !

@JustinShaedo 8 жыл бұрын

Absolutely with you. I get a positive Pavlovian response every time I hear it play :)

@imho2278 3 жыл бұрын

It's his magnum opus

@sickboygaming6204 8 жыл бұрын

hi master you are looking cool in this vedio

@titter3648 8 жыл бұрын

The standard type of "helping hand" tool is pretty useless. Best to just buy the lock line type first as they are a thousand times better.

@bartz0rt928 8 жыл бұрын

+Wankel Motor I don't disagree with you, but they're cheap and better than nothing, so not *completely* useless. Same goes for cheap 10 € soldering irons.

@titter3648 8 жыл бұрын

Bart Stikkers Well they are just a frustration. They are unstable because of the narrow base so they are tipping over all the time. The movement of the arms are very restricted, the magnifier is more in the way than helping, the joints are loose and if you try to tighten them a little it is easy to bend the flats that is holding the joints together, the alligator clip rotation locking mechanism is useless and sloppy and easy to break, etc. I would say that a cheap soldering iron is way better value than cheap helping hands tools.

@bartz0rt928 8 жыл бұрын

That's certainly true.

@mrjohhhnnnyyy5797 8 жыл бұрын

+Wankel Motor From my personal experience, it is not useless. For small boards and other little stuff, it works just fine. For large stuff - yeah, it will fail or better to say it will fall :D

@Armadurapersonal 3 жыл бұрын

I bought a very small clamp on vise on the hardware store and it has been much better than the crappy helping hand. Now I use it only for wires

@mariogregory4922 4 жыл бұрын

He's hilarious!!!

@pingpong1138 8 жыл бұрын

I found that electrical tape is also essential. Not as much but there are sometimes you just need to hold something with tape.

@pingpong1138 8 жыл бұрын

***** That is better. Either way I recommend it and always have some near me.

@friedmule5403 7 жыл бұрын

Every person who thinks he is cool should look at Collin, he is the definition on coolness!

@ducksandwhich552 7 жыл бұрын

Nexov Nexov ikr! He's amazing

@jolaqui 8 жыл бұрын

Too hot to handle, too cold to hold. Theyre called the Ghostbusters and they're in control.....

@ImJuanka 8 жыл бұрын

:( didn't go over the depth tool on the caliper.

@johnclavis 8 жыл бұрын

I gotta get a better wire stripper. The one I have now used to belong to my dad, & I think it's older than me.

@zwaveishere5599 8 жыл бұрын

Enter the Collin : )

@iansmellis 8 жыл бұрын

Digging the facial hair Collin.

@shafikon 8 жыл бұрын

forgot screwdriver and bits

@kkdaudios6913 2 жыл бұрын

4:37 🤣🤣

@FauzanLubis 8 жыл бұрын

Something different with collin

@pmkleinp 8 жыл бұрын

+Fauzan Lubis He's not clean-shaven. I think it's a better look for him.

@sethery7826 6 жыл бұрын

Too hot to handle. Too cold to hold. Grab a pair of pliers, and you’re in control. Collin be bustin some fat lines. When you gunna drop that track?

@varunahlawat9013 Жыл бұрын

wire strippers too hot to handle😂😂