Adding a water chiller to your K40

No video

Adding a water chiller to your K40

Рет қаралды 3,387

John Cabrer

Күн бұрын

Just the basics in this video. A 1/10 hp water chiller from Eco Plus, and some tubing hardware.

Пікірлер: 6

@StevenRides 4 жыл бұрын

Damn you got a deal.. $150, I'm about to buy it new for $550 for my aquarium. thanks for the video, not many reviews of it and this is the only one where it's around the temp I need it at.

@rickmccaskill7888 4 жыл бұрын

How is it working for you? What is the temperature out of the laser after sometime running a job? I am using 2 piezoelectric coolers and a radiator to cool my K40 and I can maintain around a 70 degree input and 73 degree output temp on my laser after a one hour run of cutting holes in 1/4 in plywood. Would love to see how the chiller is doing. Thanks for posting.

@diamondperformancefab5931 3 жыл бұрын

@Rick McCaskill What wattage of Peltier coolers did you use?

@rickmccaskill7888 3 жыл бұрын

Dan Dallman Here is the ones I am using. I am using the large cooling coils used on PC. www.amazon.com/gp/product/B072TQX2RQ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

@xxtrip2endzonexx936 3 жыл бұрын

Biggest piece of shit . Bought a 1/10 for a 18 gallon system and it won’t go under 69 degrees . Had to set to 70 and it still takes forever to click off . My pump size is 250gph well under the 317gph max it says on the box. Let’s not forget it’s build to cool 42 gallons . PURE GARBAGE

@ignaciogonzalez2233 Жыл бұрын

Try to use an smaller pump like 150GPH The slower the faster that it drops the temp