I loved it when you tested the emergency lights especially the one in the shed! Good video mate
@WarrensRandomAndWeirdVideos2 жыл бұрын
Very nice test. Love those emergency lights aswell especially the one in the shed
@Fire_Alarm_And_Safety_AU2 ай бұрын
Amazing test and very Cool fire alarm system as well.
@tanyacarter46393 ай бұрын
The emergency light looks good
@uksds38062 жыл бұрын
Nice! I’m working with a Apollo board at the mins once if I do get the parts I’ll let ya now.
@cool-stuff-and-more86412 жыл бұрын
Finally! I've been waiting for so long for this episode!
@bendoverurmom65402 жыл бұрын
You should get the old open area back! And put it maybe outside?
@bowsersean8098 Жыл бұрын
Connor what happens if you plug the dehumidifier and smoke detector in to an extension cable to together in that socket at 11:37
@j1firesystems4402 жыл бұрын
Great test!
@bowsersean8098 Жыл бұрын
Connor when is test 27 coming on?
@Tobimakesedits Жыл бұрын
Finally a fulleon alarm
@jdraves11382 жыл бұрын
I love the Apollo alarms, suits the property very well, amazing work mate! quick questions, Ever thinking of making a demonstation board of the alarms? And are Chubb branded alarms a good beginner brand?
@testlogs90052 жыл бұрын
yeah, i used my board to build something else, i dont really have the space to showcase a demo board currently but when i do i will be sure to build one up. chubb devices are usually not actually made by chubb so if you find out what system its compatible with ie Apollo or hochiki or other it should work without any issues.
@jdraves11382 жыл бұрын
@@testlogs9005 Okay, thanks bud
@sabinakurbanova7915 Жыл бұрын
@@testlogs9005
@ViKySyA-2013 Жыл бұрын
👍👍👍👍👍👍👍❤❤❤❤❤❤❤
@bowsersean80982 жыл бұрын
Connor at one stage soon can you show the beacon in the garage when you test the car board monoxide alarm?
@testlogs90052 жыл бұрын
it flashes exactly the same as it would with evacuate.
@MedicDown2 жыл бұрын
Question do you have fire blankets or extinguishers? I recommend having a dry powder or c02 in your panel cupboard
@testlogs90052 жыл бұрын
I have a co2 extinguisher its currently in the upstairs bedroom. The fire blanket is in the kitchen and there is a water and foam one in the garage.
@ArchiezAviation Жыл бұрын
Test logs! You see what I just found in my schools bin was an Apollo manual call so I grabbed it
@testlogs9005 Жыл бұрын
Nice 👌
@ArchiezAviation Жыл бұрын
@@testlogs9005 yeah I’m so happy saved 20£!
@testlogs9005 Жыл бұрын
@@ArchiezAviation ya got lucky :)
@Worldwidetransportandlifts4 ай бұрын
What was it doing in there😂
@TDSWar Жыл бұрын
Was the CO alarm wirelessly connected to the Module with the Relays for FLT INT And CO I think it is (fault) (co) and (fire)
@Nodiscer2 жыл бұрын
nice AcCeNt!
@bowsersean80982 жыл бұрын
Did you do a test in the shed?
@yepitisyellox2 жыл бұрын
quick question, are you able to disable the voice sounder and just leave it as just the siren
@testlogs90052 жыл бұрын
yes
@Jay-dg2qp2 жыл бұрын
When are you doing Addressable system Test 27
@TDSWar2 жыл бұрын
May I ask if u took out of the batteries off the panel, would it pop up with a AC Fault or something?
@testlogs90052 жыл бұрын
it would moan there was no batteries, then die if you killed the AC to it.
@TDSWar2 жыл бұрын
@@testlogs9005 ok so it would pop up with something like this: (FAULT) Battery not found
@testlogs90052 жыл бұрын
@@TDSWar battery fault
@TDSWar2 жыл бұрын
@@testlogs9005 pk
@TDSWar2 жыл бұрын
Would it also say something similar to if the batteries were low
@TDSWar2 жыл бұрын
Is your panel monitored (idk how to spell it) I’m guessing Test Mode doesn’t notify your local fire department when u set it off via test mode I’m guessing it isn’t anyway
@testlogs90052 жыл бұрын
It’s not monitored, I plan on integrating it into a system that sends me what’s app messages when faults and alarms occur. There is a serial port on the back of the panel for the printer I will just use the information from that, format it and send it via a what’s app.
@TDSWar2 жыл бұрын
@@testlogs9005 I thought it wasnt
@BeddingtonNationalАй бұрын
Hey! This is the same guy who posted the original comment, You alright? Are you going to be making videos any time soon?
@fire-and-alarm1 Жыл бұрын
Good afternoon ,I have a question i have a kentec synco as 8000 fire panel it has a sounder circuit 2 fualt but the resistor works and is instaled and the sounder circuit outputs 27v like all ways but can't fix the fault should i get new one or send or repair
@testlogs9005 Жыл бұрын
Go down the fix route first. Swap the resistors you know work and see if it clears the fault on that circuit.
@JC09_lvp2 жыл бұрын
is there a way to be able to wire up a mcp with a sounder/alarm and reset the sounder/alarm by resseting the mcp? (KAC mcp)
@testlogs90052 жыл бұрын
Find a call point without the resistor in series, KAC types with the rounded front have this option then just have the call point break the connection between the supply and sounder. This doesn’t work well with detectors you need a little circuit to make that work right.
@JC09_lvp2 жыл бұрын
@@testlogs9005 thanks
@JC09_lvp2 жыл бұрын
@@testlogs9005 when you say a little circuit what do you mean?
@testlogs90052 жыл бұрын
@@JC09_lvp I mean bear minimum. Literally wit up the same way as you would a light switch. Use a 12V battery or power supply if your sounder needs more then just up the voltage within its working range
@JC09_lvp2 жыл бұрын
@@testlogs9005 I’ll get me dad to do that but thanks!!!! Got ur self a sub as well👍
@LegoMaster-tn5rl Жыл бұрын
Very good video !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1😀😀
@TDSWar2 жыл бұрын
What happened with the fire alarm not activating (u used the Apollo call point and it didn’t activate first go) Edit: also when u tried to activate the heat detector it took so long to activate and the smoke alarm in the room didn’t actually go off at first (I heard one in the hallway go off and then the one probably downstairs and then it went off) Edit 2: the caravan smoke alarm sounds so basic lol (the Apollo’s sound more good)
@testlogs90052 жыл бұрын
It’s addressable, it has a very slow data rate it takes time for the command signal to tell all the sounders to turn on then synchronise hence you hear the sounders switching on in different parts of the house as it turns on and off, you can hear them sync sometimes as they stutter their tones.
@TDSWar2 жыл бұрын
@@testlogs9005 thanks btw I’m not a fire alarm expert I’m more of a transport person
@lift_brisll Жыл бұрын
Hi how did you get your sycro to make the voice sounder work my sycro won’t
@testlogs9005 Жыл бұрын
In loop explorer the voice sounder will work under discovery sounder beacon. The tone selection and message selection can be done by following the data sheet that comes with the voice sounder.
@lift_brisll Жыл бұрын
@@testlogs9005 ok but my panel keeps saying Wong device type and I am going to return the sounder
@JC09_lvp Жыл бұрын
hello test logs , i noticed you put the system into test mode with a emergency test switch? how does that link into the panel? its 10 amp switch correct?
@testlogs9005 Жыл бұрын
there is a switch monitor in the backbox thats the switch is connected to, i drilled a hole in the front plate and fitted an LED that connects to the remote indicator output of the switch monitor. the switch monitor is set up in non latching to put all zones into test while the switch is on. this is a loop connected device.
@JC09_lvp Жыл бұрын
@@testlogs9005 Thanks for getting back so fast! while I have you tho , I have bought a emergency light and a emergency light test switch. Wiring it is easy but most of the time when the fire alarms goes of all the emergency lights become active no matter what time it is. I have the same panel as you would you know how it would work? if you do know how it does work do you know how to do it?
@kencrouch1505 Жыл бұрын
LOVE FIRE ALARMS😃
@therandombrandan9422 жыл бұрын
Everytime We see that shed it gets worse and worse
@testlogs90052 жыл бұрын
its soon to be a hole in the ground so follow the progression. :P
@TDSWar2 жыл бұрын
Why did the whole system go off when u tested the carbon monoxide alarm?
@testlogs90052 жыл бұрын
It’s linked to the panel wirelessly.
@TDSWar2 жыл бұрын
@@testlogs9005 ok
@lidiaelzbietalach1741 Жыл бұрын
When will you Press the Green call Point?
@testlogs9005 Жыл бұрын
its been pressed for a good few years now haha. the door release circuit is not working
@mackayrussell1232 жыл бұрын
Brake the glass in the call Point
@testlogs90052 жыл бұрын
there is a video where i do that.
@mackayrussell1232 жыл бұрын
What is the name of the video of you brakeing call point glass
@TDSWar2 жыл бұрын
What do the lights on the emergency lights mean (red light and green light)
@testlogs90052 жыл бұрын
If it’s the green or red led it’s just for showing that the unit has mains power for charging.
@TDSWar2 жыл бұрын
@@testlogs9005 I thought red meant it had low power (I know blank (no light) means it has no power
@testlogs90052 жыл бұрын
@@TDSWar its either or depending on what brand it could be red or it could be green, there could be models that have two led colours to determine state and condition.
@TDSWar2 жыл бұрын
@@testlogs9005 I had one at school, when the lunch halls lights went out due to half (probably it was half idk tho) of the school losing power so I got to see the one in the lunch hall in action (it normally has a green light next to it when it is not active but has charge) it’s the ceiling mounted ones
@KIHS-mech.302class Жыл бұрын
2022/4/25 is rainy day?(雨天)
@TDSWar2 жыл бұрын
When u pressed the fire alarm call point I thought the call point was faulty or the panels battery died
@testlogs90052 жыл бұрын
Test mode can be funny if you activate devices then switch it to test mode before resetting the system. I find it doesn’t activate sometimes.
@TDSWar2 жыл бұрын
@Code_
@user-ur9me9hy8g11 ай бұрын
❤❤❤
@Club_vibes692 жыл бұрын
Random question, do you have kids and if so do they sometimes set the alarm off for fun? 😂😂
@testlogs90052 жыл бұрын
No I don’t, don’t plan on it anytime soon 🤣.
@Club_vibes692 жыл бұрын
@@testlogs9005 lol okay
@Club_vibes692 жыл бұрын
@@testlogs9005 I have a big favor to ask if you is there anyway we can contact privately so I can ask a couple questions about my new fire panel because obviously your quit skilled and I’m not if you don’t want to that’s fine it’s your choice but ye massive favor
@testlogs90052 жыл бұрын
@@Club_vibes69 look up the KZfaq channel AS systems, on the channel banner there is a link to his discord server. there should be a few people on there willing to give you a hand.
@Club_vibes692 жыл бұрын
@@testlogs9005 thank you very much I will look into it
@bowsersean80982 жыл бұрын
Connor you forgot to put test 25 in the fire alarm test playlist
@mackayrussell1232 жыл бұрын
Put on a roshni fire alarm sounder outside
@testlogs90052 жыл бұрын
no.
@borisboyadzhyiski4844 Жыл бұрын
Do system adresable 28
@Jackzilla20062 жыл бұрын
Hello Test Logs Remember Me
@testlogs90052 жыл бұрын
From when ?
@Jackzilla20062 жыл бұрын
@@testlogs9005 when I joined your channel
@testlogs90052 жыл бұрын
@@Jackzilla2006 no sorry.
@Jackzilla20062 жыл бұрын
@@testlogs9005 when you starting another fire alarm video
@PizzaGoat323 Жыл бұрын
ok
@JC09_lvp2 жыл бұрын
bro uploadddddddddddddddddddd
@stewarthorton89702 жыл бұрын
p̷r̷o̷m̷o̷s̷m̷
@dulochboy7635 Жыл бұрын
No
@TheJakeman7892 жыл бұрын
American systems are so much better.
@nbfs00012 жыл бұрын
I disagree.
@aviationtrainsfc12 жыл бұрын
I disagree, british ones sound like an alarm and not a buzz.