Adeptus Titanicus: Warlord Titan Build and Magnetisation

No video

Adeptus Titanicus: Warlord Titan Build and Magnetisation

Рет қаралды 6,941

6 жыл бұрын

In this video Robin takes you through a step by step guide of how to build an Adeptus Titanicus Warlord Titan with magnetised weapons.
Become a Patreon supporter : / geekswargaming
Sponsored by Element Games
Double your Crystals with code = GEEKS18
Support the channel by using the link = elementgames.co.uk/?d=10255
"Discovery Hit" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...
"Stormfront" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

Пікірлер: 18

@fernandohao601 6 жыл бұрын

For a dreadnought, I accidentally posed the model to what I thought was running forwards, but in reality was the model was going backwards... So now I have a Redemptor dreadnought tactically retreating from wherever he's set up.

@Monke1640 Жыл бұрын

Your intro represents the entire community

@flipmoviemaker 6 жыл бұрын

I did notice the leg/pelvis issue, but I figured you would notice at some point in the video and waited to comment until you brought it up. I have built two of these so far and I did nearly the same thing on the first one.

@BPFDesigns 5 жыл бұрын

Unless I am missing something, I think you glued the legs on backwards. Look at how your legs are assembled, compared to the instructions on the table: (10:35)

@JoshuapJudd 4 жыл бұрын

Was wondering that my self

@fppaintstudiocommissions2568 6 жыл бұрын

Awesome model, thanks for showing it off, need to get one! :)

@samchinberg9301 6 жыл бұрын

Was building a shadowsword for my 30K iron warriors (Perturabo's custom ride). Accidentally glued on an armored plate to the front. Couldn't get it off with a hobby knife without destroying the front of the hull. Had to make it a baneblade instead...

@user-xb1wh5mt4l 3 жыл бұрын

Now it is Diomedes' object of worship.

@kwalkrkcco4397 6 жыл бұрын

I saw on one of the Warhammer Community page articles they posted for the game (talking with the chap that designed the plastic Warlord model) that he set the kit up for 1mm x 3mm magnets so I picked some of those up. Now, I have not had a chance to start building mine yet so have not been able to verify they are the right size. Just passing on what I saw in the article.

@Pumpkin_Lich 6 жыл бұрын

5mm x 1mm according to the 3rd article in the community site.

@kwalkrkcco4397 5 жыл бұрын

You are absolutely correct, my mistake there. They are 5x1mm. Thank you for pointing that out.

@GeeksWargaming 5 жыл бұрын

I can also confirm they are 5mm x 1mm, just fitting some to the second warlord

@billygray1992 5 жыл бұрын

What’s best way to do the legs as moves all ove the place trying to make a pose

@GeeksWargaming 5 жыл бұрын

Yeah, they can be a bit wobbly. I would suggest blue tac the joints and then glue when you have the pose you like.

@doradesourde5803 3 жыл бұрын

Hello, Do you have any tips about the blue tac/green stuff? I roughly know how to apply it but what do I do with it once I got a good pose ? Asking because I have two more warlord to make and the pelvis/legs/feet assembly is a nightmare to go through and get right (as opposed to the nemesis warbringer with self locking hip/thighs joints)