Adjustable sliding knot necklace - simple how to video

Рет қаралды 197,777

2 жыл бұрын

Simple tutorial on how to make an adjustable sliding knot necklace.
We use 1.5mm cord but you can use almost any cord with this technique!
Enjoy!
Music thanks to Ikson! Song is ‘hope’

Пікірлер: 120

@Nikintendo Жыл бұрын

literally took 1 watch and i made 10 of necklaces. thank you so so so much you are amazing! super easy explanation and straight to the point!

@creativefnk Жыл бұрын

Thanks for the feedback! That makes me happy 😃 Glad my video was helpful. Thanks for watching 🌸

@Bycarola2019 2 ай бұрын

How do you get always same size for more of one specific necklace?

@AdinaDaniels Ай бұрын

This is now the 3rd video I watched regarding "How to Sliding knots" and 3rd times a charm because yours was the best done! Thank you so much!

@porchiee Ай бұрын

Thanks! I watched a lot of shorts where people weren’t explaining or going too fast. This made it so simple to understand it took one try!

@creativefnk Ай бұрын

Excellent! Glad to hear my video was helpful 💫🌻

@louisehaggarty2880 8 ай бұрын

Thank you for this tutorial. It's exactly what I needed to make a necklace from a rose quartz my daughter gifted me. Feeling grateful today

@Alex-gw8zt 10 күн бұрын

How did you get the string attached to the quartz?

@therobloxcosplayer Жыл бұрын

so useful!! i could also easily see how she ties it unlike some other people. Thank you!

@creativefnk Жыл бұрын

So happy to see this comment thanks for your feedback! Glad you enjoy my videos!

@katetob Жыл бұрын

Wonderful, thank you! One of the knots of my slip knot necklace came undone, and your video was the one (after watching a few) that finally helped me understand how to tie it 😊🙌

@creativefnk Жыл бұрын

Thanks for sharing that! So glad my video was helpful 🌻

@pixelatedrose1811 11 ай бұрын

Thank you sm for the video!!! The cord for a necklace I wear daily came untied and I was very distraught for a minute thank you for making such a cohesive tutorial

@lindascrofano5120 10 ай бұрын

Thank you so much! I tried several other methods to do this which were convoluted. You make it so easy!! Much appreciated.

@creativefnk 10 ай бұрын

So happy to hear that! Glad it was helpful 🌻

@BlitzedPort 7 ай бұрын

Thanks a bunch!! I had a really important charm I wanted to put on a good necklace and I was able to make one with a shoe lace with your help!

@creativefnk 7 ай бұрын

Yay! Thanks for your feedback, so glad my video is helpful 🌻

@staceyestes-juve4210 4 ай бұрын

Thank you. You give great instructions.

@nogaming2064 7 ай бұрын

KZfaq is the best website of all the times thank you ma'am

@arwenhamel9741 Жыл бұрын

Amazing video!!! Ive watched multiple tutorials without any success, until I found this masterpiece. I thank you for this

@creativefnk Жыл бұрын

Excellent! So glad my video was helpful! Thanks for watching 🌻

@explorewithme602 8 ай бұрын

Hi. Thank u. It's so easy. Now I'm going to watch the video a few times more so I can. Remember it forever. Very helpful thank you 😎❤️

@sarath-barani 16 күн бұрын

Great video, simple and effective. Thank you!

@loveboatcruising Жыл бұрын

Thank you! I was thinking of this and you showed me how. I did it. Now I’m ready to put holes in my shells. ❤

@creativefnk Жыл бұрын

Yay! So glad you enjoyed my video! Thanks for watching 🌻

@Matty06001 Жыл бұрын

Oh gosh, perfect explanation, thanks!

@creativefnk Жыл бұрын

Perfect! You are welcome glad you enjoyed! 🌻

@TopInWorld_001 Жыл бұрын

Thank you so much for helping me make this necklace ❤️😊

@gokulkrish3936 4 ай бұрын

thanks for this, i painted a dollar for the girl im talking with. we're gonna meet for the 2nd time and i was literally crying bcoz idk how to knot like this. now i got it thanks💟

@_nehalennia Жыл бұрын

thank you so much! i have a flat pendant with a hole that was too small to push a folded string through, this helped immensely in attaching it

@creativefnk Жыл бұрын

Excellent! Glad my video was helpful! Thanks for watching 🌼

@norulesblackbeanie Жыл бұрын

Thank you so much, I was struggling with this but took to your method much easier.

@creativefnk Жыл бұрын

So glad my video was helpful! Thanks for watching 🌻

@Erica-yr3gf Жыл бұрын

Beautiful. Thank you. ❤

@creativefnk Жыл бұрын

Thanks for watching 🌻

@HilmanRizaldi 11 ай бұрын

So helpful. Thank you!!

@creativefnk 11 ай бұрын

Great! Glad my video is helpful 🌻

@crow_aj Жыл бұрын

ahh this is so clear thank you!!

@creativefnk Жыл бұрын

Thanks so much for taking the time to comment and let me know! I’m so glad you found it helpful! Thanks for watching 🌻

@diannapia 10 ай бұрын

Appreciate you! I watched other methods and I guess because my cord is small in diameter and length (precut rope and pendant bought on a whim), either the knots would get pulled too tight and I couldn’t slide them or I couldn’t do their methods because it was too hard without a lot of slack. Your method made it so much easier for me! I have one suggestion (and please feel free to ignore this if you are not looking for suggestions for your videos) for us who need the “knots for super dummies” speed 😂- if you slow down the speed during the second or two when you’re actually doing the tying motion, it might be a bit easier for us, the viewer to follow along. Hitting the rewind 10s function brings it back too far and trying to slide the slider bars just enough for that couple of seconds while also following in real time is so tedious lol. I’m just nitpicking here and either way you’re so helpful and I am grateful for your video! It was still informative and helped me! Thank you so much!

@creativefnk 10 ай бұрын

So glad it was helpful! Thanks for your feedback! Always looking at ways to improve. Such a fine line with video speed, users want very fast content these days! Thanks for watching 🌻

@Crafting_With_Laura_x 3 ай бұрын

You can hit the settings button at the top of the video and it slows the video speed down for you. 😊

@Crafting_With_Laura_x 3 ай бұрын

@@creativefnkif people click on the settings above the video, you can choose a speed for the video, you can slow it right down if you need too x

@diannapia 3 ай бұрын

@@Crafting_With_Laura_x thank you!

@Essmifrancelycalderon 5 ай бұрын

Yes! Thank you this was perfect 😊

@creativefnk 5 ай бұрын

Excellent! 🌻💫

@lifewithcodyandfriends3775 Жыл бұрын

Just fix my favorite necklace thank you!!!!!

@creativefnk Жыл бұрын

Amazing! So glad I could help! Thanks for watching 🌸

@laylaauroraphoenix Жыл бұрын

This helped.. Thank you ❤️

@stevendragulski7440 Күн бұрын

What length is a good one to make the initial starting cord for a guys necklace that typically wears the pendant just a couple inches below the t-shirt collar? It looks like 50 inches would be a bit too much waste maybe?? Great video and you definitely have better, clearer instructions than other videos I've watched. Thank you

@vediclotus Жыл бұрын

Loved it.

@AnahataOpals 9 ай бұрын

For the 50" length- Where does the pendant sit on a typical neck- chest without being adjusted? And does this knot allow the necklace to be worn higher up to the throat or do you suggest using less total length to accomplish this rather than the full 50". Just not sure how much it tightens and what it looks like when it does so. Drilling boulder opals for pendants, And let's just say i'm not knot/ necklace savy 😂 Australian opal cutter, novice jewelry making skills. Cheers

@naissa_ahahah111 10 ай бұрын

so helpful thank you!! 🤍

@creativefnk 10 ай бұрын

Glad you enjoyed it 🌻

@suewallace6755 11 ай бұрын

Oh thank you so so much for this simply way to do a sliding knot

@creativefnk 11 ай бұрын

So glad it was helpful 🌼

@nhorzcuntapay 11 ай бұрын

Thank you for this tutorial. I made one. It's easy to follow. Like it

@creativefnk 11 ай бұрын

So glad it was easy to follow and helpful! Thanks for watching 🌼

@JYOTISHA_GP 7 ай бұрын

Wow well done

@Bluessongstress1963 Жыл бұрын

Thank you!!!🙌 💗

@pawnquacker Ай бұрын

Thank you.

@charyperez6159 9 ай бұрын

Thanks so much!

@creativefnk 9 ай бұрын

🌻💫🌼

@ttp591 8 ай бұрын

It is helpful. Tks

@tinaklag7159 Жыл бұрын

Thanks!

@nelliebear7255 11 ай бұрын

I watched 6 videos before finally stumbling on this one and actually managed to do it😂

@creativefnk 11 ай бұрын

So good! Thanks for sharing. Glad my video is helpful 🌻

@tewaewae Ай бұрын

Bugger, cut my cords too short before I watched your excellent video.

@madelyni6958 2 күн бұрын

Am I the only one thinking of “where the crawdads sing” 👀

@rat_magician 9 ай бұрын

I've been trying to figure out that knot, but it just falls apart when I try to tighten it

@solomonidoko9110 11 ай бұрын

U help me today thanks

@superkoff1 4 ай бұрын

I have a premade sliding neckalce with a pendant. But I have a new pendant I’d like to try. Is there a way to undo a sliding necklace to add a new pendant?

@phurpulhomi4959 2 ай бұрын

does 1mm make any difference

@munasing8257 11 ай бұрын

Please give me products name

@xiaomagelg677 Жыл бұрын

Thx 🙏🏽

@creativefnk Жыл бұрын

Thanks for watching 🌻

@tlc2695 Жыл бұрын

what material is the necklace

@edithkurashige1483 Жыл бұрын

Thanks 💞💞💞💞

@creativefnk Жыл бұрын

Welcome 🌻

@TiltEV Жыл бұрын

Cheers

@jackierod8902 Жыл бұрын

Hi, love how easy is to make this, I have a question... a few months ago I bought a adjustable choker necklace and after a couple months just broke in two,tried to fixed but broke again. My question is what's the best durable material I can use for this type of necklace? Thank you!

@bigiron5508 Жыл бұрын

I have the same problem, the leather cord I use is spliced together and always breaks at the splice. Frustrating for sure.

@creativefnk Жыл бұрын

Great question! I love leather but find it does break after a while. I find waxed cords more durable so try a waxed cotton or waxed polyester cord 1-2mm and it should last much better. Good luck! Thanks for watching 🌻

@taralisbah Жыл бұрын

i have a kind of slippery silky cotton cord to use-and I've lost 2 pendants recently b/c the knot I tied just simply opened and the cord stayed around my neck and the pendant went bye bye. Do you think the slippery cord will work? what I'm hanging is kind of heavy.

@creativefnk Жыл бұрын

Hmmm slippery cord is a bit risky unless you can tie the knots super tight. I find a waxed twine is better because it grips without coming undone 🌻

@thehobbymachinistnz Жыл бұрын

Thanks for the video. I will be making something like this for my 7 year old daughter and this video is helpful. I see you are in Australia but it sounds like you have a Kiwi accent.

@creativefnk Жыл бұрын

Haha sure am! Kiwi living in Oz! So glad you enjoyed my video! Thanks for watching 🌼

@saltyflow Жыл бұрын

thank youuu

@creativefnk Жыл бұрын

Thanks for watching 🤩

@kumottakun6089 11 ай бұрын

Thank you for this wonderful tutorial, just a question tho, I want mine to be more of a choker length at its tightest and have just above the cleavage at its longest, can you recommend how long my total cord should be? Thank you! 💕

@stefn_ 5 ай бұрын

I did it lol thank you

@creativefnk 5 ай бұрын

Yippee 🥳

@ritikamandal6253 3 ай бұрын

Hii can you tell me which type of thread did you use??

@niyatichowdarykollu9649 2 ай бұрын

@@ritikamandal6253she uses a cotton cordd

@ritikamandal6253 2 ай бұрын

@@niyatichowdarykollu9649 this cotton cord is thick but which I brought is thin and it is so flexible

@michalkol3454 Жыл бұрын

thank you very much, can you send me the link where you buy the cotton cord? i cant find . thx

@creativefnk Жыл бұрын

See my other comment reply for the 1mm waxed twine or you can also use 2mm leather as seen in some of my other videos. Just depends the thickness you want. Good luck! creativefnk.com/products/2mm-leather-cord

@michalkol3454 Жыл бұрын

i cant find good cotton cord, so if you any recomand for a good one?

@creativefnk Жыл бұрын

Good supplies are hard to find! I mostly use 1mm waxed twine for sliding knot necklaces. You can find it on my website here creativefnk.com/products/1mm-waxed-twine

@akashaman570 Жыл бұрын

thanks

@creativefnk Жыл бұрын

You're welcome! 🌻

@meteron3971 Жыл бұрын

How do I adjust mine to make it longer?

@creativefnk Жыл бұрын

You can loosen the knot and slide it along the thread before pulling it tight again

@pasindulakshan8822 7 ай бұрын

Thnkz akki❤

@creativefnk 7 ай бұрын

🤩

@DetoxXBL 9 ай бұрын

It feel like my necklace is stuck and i cannot make it smaller any tips

@creativefnk 9 ай бұрын

Are the knots together? Or near the pendant? You may need to untie them and retie them in a better position. You should be able to slide them to make it bigger or smaller, if not - the knots are in the wrong position and you need to re-tie them. Good luck 👍