Adjusting Nev-R-Adjust Trailer Brakes BEFORE Towing your Trailer

Рет қаралды 4,346

4 ай бұрын

Here is a way to initially adjust your automatic-adjusting electric brakes without the trailer being hooked to the truck. The brakes will then be road-ready when you do hook to the trailer. This method also validates that the automatic mechanism is working correctly and so will automatically adjust your brakes as you drive. Otherwise the standard method is to tow the trailer and brake multiple times and 'hope' that the automatic adjusters are working correctly. The video includes how to make a remote switch to actuate the electric brakes without the trailer being hooked up to the truck. Note that this is not a monetary video. Just hope it is helpful. Also, please note that the viewer assumes the full risk of implementing any concepts provided in this video and the author provides this as information only and assumes no responsibility for the accuracy or safety of the concepts provided here.

Пікірлер: 12

@billworkman-nn2vr 2 ай бұрын

Thank you for taking the time to make this video. The wiring diagram setup to simulate the brake controller and step by step process is very helpful!

@Nick-cy1dj 18 күн бұрын

I knew when i saw the hand carved jack stand i was in for a show..

@myriadcorp 14 күн бұрын

I used a screwdriver and a flashlight to adjust my self adjusting drum brakes. I set each tire the same as I would manual adjusting brakes. You can do it by clicking the lever up or down. You wasted a lot of time to do something that should take a few minutes. It took me longer to raise the wheel than it did adjusting the brake.

@hybridmusclegarage4590 26 күн бұрын

Wow man, well said and to the point. Excellent video.

@jesse1247 2 ай бұрын

Excellent video. Thanks for sharing it with us.

@mackellyman5642 Ай бұрын

Excellent content...

@martinparmer Ай бұрын

could you accomplish the same adjustment by jacking up the trailer and having someone depress the brake pedal on the tow vehicle?

@johnmills837 Ай бұрын

They are drum brakes. Just manual adjust to a slight drag. You are making a mountain out of a mole hill. Your burning up the magnet by leaving it on for a per longed time.

@maicokid 29 күн бұрын

How would you do that? My problem is keeping that adjustment "tang" out of the way while trying to adjust the adjuster wheel? Two screwdrivers? Thanks

@johnmills837 29 күн бұрын

@@maicokid One brake tool and a small flat blade

@VinceRichards-ly2sb 21 күн бұрын

And...without seal, you're exposing your bearings to dust and debri

@Nick-cy1dj 18 күн бұрын

Amen! Could be a 15 second video