You've helped a poor college student renting an apartment with an old style General Electric thermostat. Thank you so much! I'm trying to be more efficient.

I found your videos when looking for a reason why my suburban RV heater. The problem I was having was the heater would not come on at all. No fan, flame, or attempt at ignition. I took the cover off of my thermostat and I adjusted the small dial and it worked. I don’t know why that made it come on but the unit is only two years old and I think I will have to replace the whole thermostat. Now I find myself watching more of your videos, thanks for all the info.

Thank you, the too hot, too cold is what was happening with our radiant floor heated apartment. This addressed it nicely, commencing experiment.

I learned something new today!! Thanks for putting this up! :)

Can’t thank u enough I’m actually warm now before was getting sick bless u

Just what I needed, thanks!

Thank you for the help!!!

When I was cutting my teeth on furnaces I ran into some old camstat thermostats that were extremely picky, so I had to learn. There were also some Trane commercials that had such a low draw thru the electronics that we had to add a relay in parallel to draw enough for a mechanical to work. About the .8, hey if it works, who cares? Thanks GFM

What number is shorter cycle n hotter cycle??

Hi GFM, I've come back to your videos several times over the past few years. We have a new millivolt thermostat (Honeywell CT33) connected to a new propane gravity floor furnace. It works fine during the day, when we're moving around, but at night the furnace stops kicking on, and the place gets very cold (it's a little mountain cabin). Even during the day sometimes, the heat won't kick on, but as soon as I walk up to the thermostat, or sometimes touch it lightly, it will start. Our thermostat doesn't have an anticipator, I don't think, just a brass-looking screw near the top of the bimetal coil that looks to be some sort of connection adjustment. Anyway, have you encountered anything like this, and if so do you have any ideas? Thank you.

Question!!! What do you think it could be if my A/C just basically almost quits working? Its pushing cold air out but not making my house colder! A little late too call someone but was just wondering

I have a Coleman deluxe blend air 2 . I just replaced the thermostat with a Honeywell home ct31A1003 . It came factory set to .4 but my question is. is that the correct setting for that furnace .And basically you can just play with this thing to adjust it to your home space & size. basically pinpointing how long you wanted to run before it turns off or turns on???? Finding that sweet spot of heat and when to turn off before too cold ? So instead of shutting of exactly on 73 degrees it gives a minute more before shutting off

What if its only heating? Like either on the cold side or hot it's HOT! Help !!

My house is too hot during the day and night doesn't get cold goes up to 78 need help thank u I clean the ac coils already it's clean I feel the air being thrown but not cold

What bout cooling, does it work the same ? --- anticipator... I'm having trouble keeping the air running after 7pm. It won't start up again till maybe 7am . It's a old rectangle Honeywell heat pump therm. Fan works all the time (brand new), is that right ?

I am considering switching from the old Honeywell mechanical thermostat to a Honeywell programmable thermostat. My question is how can the cycle be adjusted? I have looked at the Users Manual and there is no anticipator adjustment.

My apartment is getting too chilly before the heat kicks in. Where do I set the anticipator please. Do I want more cycles per or or less? Can you just spell it out for me. Thanks so much.

Mines hooked up in garage it's a gas heater what should it be set on to keep it going on long cycle

I wonder if you can help me, our living room thermostat wasn't turning on at 20 degrees like it normally does this week, we had to turn the the thermostat to 23-24 for the heat to come on, so we had a new thermostat installed and we still have the same problem with the new thermostat, this morning it was registered 20 but it wasn't that at all, I had left it on 15 over night, would you know what the problem might be? In the instruction's it talks about anticipator setting but there wasn't a anticipator on the old Honeywell CT 43 A thermostat, it's the old style that you adjust yourself, we have baseboard heating! the new thermostat does have a anticipator, but very unsure how to adjust it, I have phoned White Rodgers and they said to leave it on 4 which was the default setting, many thanks for any help.

Thank you

Great video! I have the same exact thermostat in my Winnebago 27' motorhome. It is a Suburban NT27SP. I called Suburban to ask them the setting for the anticipator. They said it is .78......where would I put my probes on my multimeter to check the amp draw for this thermostat? The furnace is wired for 120 volts @3.5 amps. David 🚀

Hi there I m having issues ..my home is too cold I did wait for 2 days but still the same...so can u help me on this n I dnt know which number in longer cycle makes hot n cold..so could u tell us that

Could you do a vid on adjusting the antisipator on the Honeywell Round heat only CT87K These have a disk battery also And some printed cricket boards.

My heater won’t shut off when u use it right now from your video I’ve made the cycle shorter I don’t have this problem with the cooling aspect but I just began to use heat and it just stays on....

Hello what number is for shorter cycles I have the problem that it gets to hot or to cold help please

My air will not kick in and it's so hot! What should the anticipator be on for cold air?

So my toddler climbed up and spun that dial thingy an unknown number of times an unknown direction! And now the heater doesn’t work…where would I start?

it will work better if they would set them up properly though, but that's asking for to much around here.

What if my heat won’t go off how do I fix that on this plz

I have this thermostat and it won’t turn on my heat or air conditioner? Can u help before I spent $ on a consult pleeeaassseee

What if there is no fluid in the glass thing?

I went all the way around, my heater sounds like it wants to start but then it just shuts off. I've had a maintenance man come by and told me everything was fine. I don't know what else to do. Sometimes it'll work, just annoying at the moment. maintenance man said it might be the thermo. Anyone else have any suggestions?? Cold on Christmas Eve.

Como se q esta apagado

What do you mean by a cycle?

I have a question why would the little wire on the dial glow red and the burn the dial?

Do these have mercury in them??

You mean that you don't set them to .8a automatically? lol, that seems to be the norm here but don't hate us because of that!

HOW DO I TURN IT OFFFFFFF

Holy eff the smacking

Is this boy eating a sandwich?

This didn’t help at all