Рет қаралды 591,458
How to Wire AC Compressor Clutch Relay
Get the Book at Amazon:
www.createspac...
Get the Android Book-APP:
play.google.co....
Get the Kindle Book:
www.amazon.com/...
The AC compressor clutch is an electromagnetic device that engages the air conditioning compressor. This unit is composed of three parts, the clutch plate, the hub and the coil. The clutch coil is the one that creates an electromagnetic field around it, which attracts the plate and engages the clutch. The plate is also linked to the drive or serpentine belt and is driven by the crankshaft. The hub and the plate have to be calibrated to a specific gap using a feeler gauge.
The purpose of this video is to illustrate how almost all AC compressor clutches are wires. The actual wiring may contain other components, such as transistors and IC computer chips, but the control itself is the same. In all cases, these extra components are used to control the relay coil, which in itself controls the AC compressor clutch. This simple circuit can also be used to wire an older vehicle due to lack of parts and high costs.
Here is how this circuit works.
This circuit has one relay, a refrigerant pressure switch, and a micro switch. The micro switch is a W O T or wide open throttle switch used to disengage the compressor clutch during wide open throttle conditions. This is done to protect the compressor from damage at high engine speeds.
Electrical current flows from the 12 volt power feed to the fuse. Then current flows to terminal... Get the whole story right here in this video...Enjoy...
Amazon Printed-Books & Kindle:
www.amazon.com/...
Google Play Android APPs:
play.google.co...
Amazon Video DVDs:
www.amazon.com/...
Barnes & Noble Nook:
www.barnesandno...
Apple iTunes iPad:
itunes.apple.co...