Hikvision Intercom DS-KD8003 IME1 Lock wiring diagram. Electric &Magnetic lock & 2 lock connection

Рет қаралды 78,781

Күн бұрын

Hikvision Intercom DS-KD8003 IME1 Lock wiring diagram. Electric &Magnetic lock & 2 lock connection.
0:00 Intro
00:11 Electric Lock Wiring Diagram
05 :10 Magnetic Lock Wiring Diagram
09:25 Dual Lock Wiring Diagram
11:18 Enable Door 2 via Batch Tool

Пікірлер: 89

@elimgoz 2 жыл бұрын

Great guide. Much easier to understand than the official manual, thanks.

@adshikvision 2 жыл бұрын

You're welcome!

@aliwahabi6876 11 ай бұрын

Thank you so much, you have given me a great solution. so much helpful and very well explained.

@adshikvision 11 ай бұрын

Thanks dear

@michaelrodriguez1244 Жыл бұрын

Muchas Gracias. Many Thanks :)

@kaluischannel173 2 жыл бұрын

your video is a big help for me.

@adshikvision 2 жыл бұрын

Thanks dear

@S7EVE_P Жыл бұрын

Thanks for this, really helpful

@adshikvision Жыл бұрын

Thanks

@drszantosi 2 жыл бұрын

Thank you so much for this great tutorial!

@adshikvision 2 жыл бұрын

You are so welcome!

@drszantosi 2 жыл бұрын

@@adshikvision Dear friend! I alredy installed the complete system and it works fine. Now i'd like to connect an additional EXIT button to open the same electric lock. My object is to control the same lock with more Exit buttons. I figoured out , that the "No touch" Exit buttons's yellow line is an NC contact. I tried to connect both Exit buttons to the same connector (AIN3) but it won't work....If i connect the buttons in 2 diferent inpunts (AIN3 and AIN4) than i hear the relays noise but unfortunately the AIN4 button opens the NO2/NC2 contacts. What do think, how is it possible to install and connect 2 exit buttons? Thx Here you can watch my setup: kzfaq.info/get/bejne/erVxhbKluZemgJc.html&ab_channel=drszantosi

@kennyvandewiele9883 Ай бұрын

Do i need to setup this or enable

@faocisco 2 жыл бұрын

Good explanation. Any idea on how to unlock the door using face comparison using the KD8003 connected to a NVR?

@adshikvision 2 жыл бұрын

kzfaq.info/get/bejne/m9amltBk1ba9kps.html&ab_channel=ADSHikvisionTech iDS-7604HQHI/M1/FS Cheapest dvr also you can use any 2mp camera for face comparison

@smusyk2859 Жыл бұрын

We've been installing these now for over a year now & believe me I had no idea u could get power from the outdoor station for locks, we always use external psu, great explanation though, any idea how to adjust lock time, as some locks just need a 2second trigger, thank you!

@adshikvision Жыл бұрын

Use ivms4200 software to adjust lock duration

@JaimeRamirez-zr3oh 9 ай бұрын

Para una distancia de 80 mts que aconsejan Gracias por la información

@user-re5yl4sj4f Жыл бұрын

The door station has 4 alarm inputs. I know that 1 can be used for the button that opens the gate. How to connect and use the other inputs (e.g. open gate or wicket sensor) to be able to read/receive it on the internal monitor. or in the hik connect app?

@user-ow5xj6gx1l 6 ай бұрын

Thank you for the detailed video! where do you set up the second lock? you show how you enable it but do you do it from the control panel ?

@adshikvision 5 ай бұрын

Yes, exactly

@harmz83 2 жыл бұрын

Hello @ 9.25 can the no touch button get 12V red & black from the intercom device - connect to 12V and GND? I don’t understand why there is a need for an additional power supply. Also with this config - does the touch button open both locks or just one? Please confirm. Thanks

@adshikvision 2 жыл бұрын

lock 1 only you can connect exit button

@amrsalem6930 2 жыл бұрын

Would it work for DS-KD8003-IME1/NS?

@markopraprotnik7824 Жыл бұрын

Great, thank you! I finally made it working! The guide wasn't much help.

@adshikvision Жыл бұрын

Great to hear!

@josemota4702 2 жыл бұрын

Good job. It is possible do the same, without power supply, on the DS-KV6113-WPE1?

@adshikvision 2 жыл бұрын

No dear

@RomanSliva 10 ай бұрын

Loop 12V to GND? :-) 12V to COM

@randalejupp Жыл бұрын

Hello, great video! What lock do i have to use at 1:30? I have installed a 10-24V AC/DC (effeff 118e500 a71) lock. does this work?

@adshikvision Жыл бұрын

Device will share 12V only. but your lock 10-24V AC/DC (effeff 118e500 a71) you need to additional adaptor for lock

@fabiogameiro8816 8 ай бұрын

Will it work with DS KIS101-P exterior Module to avoid having an additional 12V power unit for door lock?

@adshikvision 8 ай бұрын

@McGafferTV 2 жыл бұрын

is POE enough to hold the mag locks i thought you would need a 12v power supply input to the external door station???

@adshikvision 2 жыл бұрын

its depend upon your poe switch performance. most of the installer using this method but they are not facing any issue.

@786kasimbk 2 жыл бұрын

Tanks

@adshikvision 2 жыл бұрын

Welcome

@sparent1 10 ай бұрын

hi, I performed the same installation as yours... but I have problems opening the door, I don't have the voice that says door open doesn't say anything, then if I try to open the door with the DS-KH8350 -WTE1 the screen freezes but the door is opened but without voice.

@adshikvision 10 ай бұрын

Update both device firmware

@sparent1 10 ай бұрын

I updated to the latest firmware, it still gives me the same problem, as soon as I try to open the electric lock the ds-kh8350-wte1 locks out and for a minute I can't view the external station and the door open item says nothing. get resolved

@sparent1 10 ай бұрын

Now everything works, I only have a problem when they ring and answer and as soon as I open the door after a few seconds the call stops. You can change this setting to last longer. Thank you

@TommyScrew 9 ай бұрын

@@sparent1 Hi, how did you manage to solve this? I have same issue and it seems, like there is spike current, which drains power from mcu and therefore causes to reboot the outdoor unit. Will experiment with serial capacitors

@TommyScrew 9 ай бұрын

So today I managed to solve this. After I checked my electric strike, it had wrong V/A ratings. I included some resistors in serial to it and now I can open gate even without external power, using just POE from switch. I have KD8003-IME1

@jaskiranbrar2235 6 ай бұрын

Thank for you this video- I tried using the DS-KV6113-WPE1 2nd Gen IP Villa Door Station to provide power to door strike but did not work. Does this only work with the Gen2 DS-KD8003-IME1? Is it because this KD8003 has a 12v power output?

@adshikvision 6 ай бұрын

Dear DS-KV6113 will not share power to lock..

@joaquincosiansi3344 6 ай бұрын

What intercom model allows you to put two locks?

@adshikvision 6 ай бұрын

DS-KD8003IME1 and DS-KV8113wme1

@lemansmatze 2 жыл бұрын

Hey ADS Hikvision Tech. The 12VDC Port you connected to COM is an 12VDC input. Hikvision officially says, you should not connect your door opener there. Now i can see you connecting the door opener there in your video and it works. We have customers who destroyed their door stations by doing that. Do you have an answer?

@adshikvision 2 жыл бұрын

Thanks for your comments. hikvision officialy not declare. This is a tricks, if you are a professional technician please follow this. otherwise use as usual lock connection.

@loicbisson8258 2 жыл бұрын

Did it work with the ime2 (2 wire) because i have no voltage betWeen 12v and grd

@adshikvision 2 жыл бұрын

@loicbisson8258 2 жыл бұрын

@@adshikvision thx, and do you know why i cannot connect to the interface with ivms 4200(v3.6.+) i have root only the port 8000 but when i click on the setting button only a white screen appear, (its work in local network but not in distance)

@theobserwatorz88 10 ай бұрын

What about DS-KD8003-IME1(B)/Surface ?

@petrotawa Жыл бұрын

Thanks for guide, but please help me: I have 2 doors to operate, one is electrical lock 12V and second is gate (without current needed). If i use the 12V from 8003 unit it sometimes works and sometimes not (suspect lack of current for electric lock) So i want to connect electric lock with external 12V adapter to COM & NO1. But for gate i have to use connection without any current. If i connect to COM & NO2 i can damage gate el. card due to 12V from electric lock. Do You understand me? 😮😅

@Jo3_Black Жыл бұрын

The relays on the door station are volt-free unless you use a separate power supply or make a bridge between 12V and COM whicg does not affect lock 2 connection

@user-fd8hd6ii7o 11 ай бұрын

Thank you. Can you tell me which electronic lock you are using?

@adshikvision 11 ай бұрын

@adamtopol581 2 жыл бұрын

Hello, is it possible to do same on DS-KV8213-WME1. I try without sucess - where can be mistake?... Just opening dor no dor button needed.

@adshikvision 2 жыл бұрын

for dual lock you need to enable lock 2 option in intercom tab.pls watch video till end. watch 11:51

@user-rk9oq9qj2i 2 жыл бұрын

هلا اقدر اوصل قفل الباب الى الشاشه بدل الجرس الخارجي

@adshikvision 2 жыл бұрын

no, its very difficult. لا ، من الصعب جدا

@seanbugeja Жыл бұрын

so this model doesn't need a separate 12V PSU just to unlock the door?

@adshikvision Жыл бұрын

Yes

@seanbugeja Жыл бұрын

Yes it needs? Or yes it doesn't need? Lol

@alphak8526 10 ай бұрын

Sir i installed kis 602 to s-200el i connected as you shown but lock not opening it just touches the relay with low force and if use adapter it doesnt work at all...please help sir iam requesting you

@lukaszbrodowski5086 Жыл бұрын

I connected the electric lock without DC, as shown in the video. And how to connect the gate which is 24v, can you help?

@adshikvision Жыл бұрын

for 24 v lock u need to connect Adaptor + connect to lock + Adaptor - connect to intercom outdoor COM intercom outdoor NC connect to lock -

@yemgaire9741 3 ай бұрын

can open slaliding gate

@adshikvision 3 ай бұрын

yes

@jayonspeed557 2 жыл бұрын

At 1:15 its a loop from 12V to COM right? Thanks for posting, its been a huge help.

@adshikvision 2 жыл бұрын

THANKS

@palacx Жыл бұрын

Really nice guide :) could you please help me out with connection of standard push button for opening? I mean situation with standard button for exit which you need to press - is also required to connect 12V adaptor? Thank you

@adshikvision Жыл бұрын

Use only AIN3 & GND

@palacx Жыл бұрын

@@adshikvision Thank you for quick answer :) I have one additional question about potential risk due to failure of electric lock to avoid damage of hikvision outdoor unit. Do you have any experience with fuse implementation to electrical circuit? I have electric lock with 12 V DC, 0,24 A ...12 V with 50 Ohm. Could you please suggest what kind of fuse would be the best to secure hikvision unit and where to implement to circuit? Thank you

@liononice17 Жыл бұрын

Hi, I have a electronikal door, not mechanical. there are 2 wires withalready 12V on the door. If one of them touch the other, the door open automatically. How can I do this with my hikvision doorbel, could you please help me.

@adshikvision Жыл бұрын

you can integrate outdoor to that 12v power

@liononice17 Жыл бұрын

@@adshikvision thank you very much, which slots can I use? Com+No1? My outdoorstation is KD8003

@adshikvision Жыл бұрын

@@liononice17 yes

@liononice17 Жыл бұрын

@@adshikvision ♥️

@ardabeyazoglu Жыл бұрын

hi, i have the same situation. could you tell me how you accomplished this? where did u connect those two wires that have 12v ?

@luispaulojavecaritas913 5 ай бұрын

Sorry, model DS-KV8413-WME1(b)

@adshikvision 4 ай бұрын

No option to share power to lock

@TimePass-fw8zu Жыл бұрын

After outdoor restart , door not open?

@TimePass-fw8zu Жыл бұрын

Electric lock without using adopter i connect but not working after tic sounds come outdoor intercom will restart same connection i did (12v to com, grd to door -, no1 to door+) electric lock is 12 v but im use 12v adopter it works properly. Maybe you understand what i wrote sorry for my english Cumunication😊

@adshikvision Жыл бұрын

check video again if u r using poe power u need to make a loop

@sparent1 Жыл бұрын

Good job. It is possible do the same, without power supply, on the DS-KV8113-WME1(B)?

@adshikvision Жыл бұрын

No Dear..

@sparent1 11 ай бұрын

if I can only power the electric lock with the poe switch. Thank you