Making Potato Cannon kzfaq.info/get/bejne/a9R5dtV1t7nPmJs.htmlsi=NYF1UXjhCdBL-e2W

This deserves 10mil views... severely underrated! The crap ones usually get viralled while the genuinely good ones gets buried!

have been pondering about the best way to make durable cones the last few days. My man, you've found the way! Absolutely brilliant

this guy is ready... as long as there is wood,nails or regular toothpicks on the planet.. this dude is ready for zombie apocalypse.

Nice work

Clever way of creating a lot of cones inexpensively!

This is the best blowgun video! Subscribed!!

This is simply genius!!! Thank ya, neighbor, for sharing.

Thank’s very much!...you are beautiful!!!

Wow!!! Impressive.

Excellent tutorial!

Bravo!

这个制作过程很棒!👍👍👍😍😍😍

Best video I’ve seen on how to make your own darts

This is the best!

brilliant idea... thanks

The best method ever!

Very sweet darts

The Golden Scissors used for this project kzfaq.info/get/bejne/pqhki9h43smWnnk.html

Congratulations, you are a genius!!

Instead of trimming down the last bit with scissors or knife.. I use sandpaper because it makes it perfectly flat and you end up with a better fit in the pipe

Awesome video :-)

Good stuff little brother. Quite creative

Awesome tutorial!

After a year, still the best blowdart ever made on youtube, cant seem to find any decent blowgun vids. Thanks! And 100k views is underrated man....

Just a wicked video

Nice

👍👍👍

Very, very cool!!!! 👍👍👍👍 On the subject of fixating the cones to the shafts, you should also try epoxy putty Milliput. Is very versatile, sticks fine to many materials and once dried, is very light. Cheers!!!

That accuracy at 30 meters shows how much you have practiced! Very impressive! I have made blowgun darts from milk jugs the way you did but you have taken the skill a step further! I’m hitting subscribe!

0:00 DESTRUCTION! ☠☠☠ 2:57 HDPE Cone Making 🔥🎯 5:59 Bamboo Darts 7:06 Nail Darts 8:14 Spearhead Darts 9:48 Heat Treatment!🔥🔥🔥 Tracer BlowDart Tutorial! kzfaq.info/get/bejne/aqh6nr2UnLvXlYE.html

Rubber tipped golf tees with bike wheel spokes,hot melt glue,17mm big bore. They hit hard.

Thanks for the tips on caps! I use a little butane soldering gun that is a heat gun as well, and a carpenter's plum to press out cones. Very light oil on the shaft and some hot glue. After centering and hot gluing, they will come off cleanly if you want for hunting. Good work!

Hey man, I am the one you told to leave a comment. We been chatting a bit on FB😊

Heavily Upgraded Pvc Blowgun: ( kzfaq.info/get/bejne/lZNze6mDrLrLaZs.html ) Homemade Slockmaster Blowdart: ( kzfaq.info/get/bejne/nryhpLOVr7aYln0.html ) Tracer Blowdarts Tutorial ( kzfaq.info/get/bejne/aqh6nr2UnLvXlYE.html ) Parachute Blowdart ( kzfaq.info/get/bejne/d9aKp5t5tMWWdGg.html ) Ice Block vs Spearhead Darts ( kzfaq.info/get/bejne/ap-eppinstetipc.html ) 0:00 Total Destruction 2:12 30m Shooting 2:58 Making the Plastic Cones! 5:58 Bamboo Darts Making 7:06 Nail Darts Making 8:13 SPEARHEAD Darts Making 9:47 HEAT TREATMENT!

Was wondering how to make better cones. This seems like it will work so awesome for that. I use 12 and 16 penny nails for my darts. Sometimes a little heavy but nothing an angle grinder can’t take care of

wonderful

That was strong blowgun... Totally, powerful weapon...I love the glowing one... It look beautiful..!!

This is genius!

I discovered that by making several vertical cuts 2-3 mm long around the rim of the cone you can make the cone a little tight in the pipe. The rim collapses a little to allow the dart into the pipe but then it expand when you blow air into the cone. This creates a good seal against the inside of the pipe.

Hello 👋 you are such a great person ❤️ Keep it on. I am looking forward to see more creations in the near future .

Great video

Hello LKH9 I enjoyed n learned lots from this 1st, video. I just subscribed. I have to shoot at night n the lit darts are just the thing i care to make, do you have a video for those lit darts? or will you make a new video showing us? Thanks again, great job

Good gracious, you should buy a small anvil or at least use a three lb hammer as one. $7 at Agra supply. Great method of making cones, 👍👍

Awesome 👏 great video subscribed

this was awsum

muito bom esses seus moldes, parabéns mesmo 👏🏻👏🏻👏🏻👏🏻👏🏻 vou fazer assim também.

Great video! Subbed

Nice shooting ! A very interesting method with the plastic jugs. In terms of caliber adaptation, I would suggest using a thin marker pen to mark off the outer cone extension with the cone inserted inside the tube end, and cutting the unwanted extra length using sharp scissors. Using that knife to do so is an accident waiting to happen. Nail tip sharpening is best achieved by cutting off the nail head, inserting the nail in a drill chuck with the drill mounted on a drill press, and using a metal file to shape the nail tip as it rotates inside the drill. Perfect arrow-shape tips guaranteed with this approach.

When he used the nail clippers 🤣

I just purchased a Cold Steel 5 Ft. blowgun...and have been shooting the darts that came with it. I am impressed at the accuracy, but they are quite spendy! This vid was EXACTLY what I was looking for. Do you have a tip on straightening bent bamboo shafts? How about favorite lengths for the various shaft materials? Def gonna try all of these.

You are a true genius!!!

5 stars from me also my friend, very good job!

How do you make those sick tracer darts, dude? Awesome vid!

this is cool thanks for this video - i just got my blowgun its alot of fun in pa state

I've been doing something similar, but better, for over fifty years. First, I make my blow-gun from 1/2" metal conduit. I use a 5 foot piece for the blow-pipe and a 6" section for a die to form my cones. I put the 6" piece into a vice (or anything that will hold it securely). I heat the plastic much the same way this guy did, holding it over the piece of pipe. After the plastic softens, I push a plumb-bob (or whatever conical tool you're using) into the plastic, into the end of the short pipe. You twist the plumb-bob about 1/4 of a turn, it cuts the cap off even with the top of the pipe, and you're done. With a little practice, you can make 250-300 in an hour, already perfectly sized for your blow-gun. I sharpen an 8d nail, stick it through with a drop of hot glue, and it will go through a half-inch piece of plywood.

Anyone else taken by the beautiful golden pair of scissors?

Jajaja que ocurrente hacerlo de embaces de plástico, 10 puntos, genio 😁

Oh yeah...i forgot to ask what you used for your cone to make the flights? Thanks. Great Vid!

How long do I have to wait for the hdpe to dry?

awesome skills...quenching in oil is better than water. not sure which type of oil tho and the blue part of the flame is the coldest. best to place steel is just after the blue part about 5mm towards the tip. I also read somewhere that after you heat tip and shape it, then you quench in oil then re heat it and let it air cool. That hardens it but I'm not sure if that would make it brittle or not.

The nails were probably actually stronger after you hammered them and before heat treatment. Nails like that are not really hardenable at all. But cold hammering them work hardened them probably enough to make a difference in holding an edge

Now I've got a use for the chopsticks I get from the restaurant. Excellent video.

Asthmatics sobbing in the corner🤣

Where do you keep your bandages?

What a great video! I really like the way you made the cones. If you used a torch to heat the tip of the spoke to a bright red you could move the steel more easily. Set each aside as you heat and beat. Once you make the point by stock removal on each dart heat the tips to red. In dim light watch it turn to oxblood then quench In water. That will harden the tip a bit and allow sharpening if you were to hunt small critters. Not knowing the type of steel in the spokes this method will improve the edge holding of the tip even though it may not be the perfect method to harden and quench. I should add that once you've heated and hammered the points wide the next heat and quench can be done en mass.Best wishes.

Nice!!! I’d say to insure longevity of the bamboo point add a bit of heat to the points and maybe a bit of beeswax

Good idea I tried I missed a few but it works

This is what I'm looking for, thank you.

The plastic cones are perfectly done..

Dude, are you in any FB groups or have a FB page? Your videos are really good. Helped me out a lot, thanks man.

What kind of plastic container are you using? I'm pretty sure I've tried a milk jug before and it didn't work... lol thanks!

I would love to be able have one of these, but they were made illegal to own or possess in the UK a few years ago...

Does the muzzle break silence the pop when the dart exits? I've thought about putting one on mine but I don't know if it would cause the pipe to loose pressure before the dart exits.

We have the same process

My channel name is BOWGUN, not blowgun. Another name for a crossbow. I like blowguns too. Lol I have a cold steel one

3:55 very cool may I make blow dart like you ?

Buenas noches quisiera hacer una cervatana

Show.

What diameter of tubing are you using with 30 meter targets?

Try using it in potato gun spud gun .i think it will definitely maximize the range and power ..or probably destroy that dart

what is the thickness of the bamboo darts? in my area i can find only 3mm.

I tried making HDPE cone for my alcohol rifle with steel darts but that didn't work that well the reason why is because the the cone either breaks on impact basically dis attaches from the dart or it immediately disattaches from the dart since It leaves the barrel I find cardboard cones much easier to make and more durable in terms of pressure for example the strongest dart gun I have made is a air powered one with bottle pressurized with air from bike pump if the dart can survive a shot into a wooden plank from that gun it's gonna work just fine in the alcohol one when I tested some plastic cone darts with the air gun they broke on instant but whenever I used cardboard glued cones with some tape on too they handled the pressure just fine I'll be from now on making cardboard cones cuz I find that tons easier to make than the plastic cones these ones were nightmare cuz I kept losing ton of plastic just to get one right also I'd like u to try the cardboard cone darts in ur new video I personally used cardboard from old shoe boxes

Which type of bottle i make a cone.

What bottle did you use to make the darts?

Can i use it for fishing?

Why did u put heat treatment on the nail? ( after sharpening the point..)

Not many cats crapping all over your garden I bet?

I just bought mine instead... It just seemed like too much work. I'm not much of a DIYer unless it comes to electronicsm. You can get hunting broad head darts fairly cheap also if you don't wanna make the darts. Also you can attach a fishing reel to the bottom and add rod eyelets and attach fishing string to the darts to make a harpoon blow gun. Be sure to put a barb on the dart tho so whatever you shoot doesn't fall off... Still nicely done tho if you're into DIY stuff. 🙃

What’s the mouth peace made from

The heavier darts, that you made out of the bicycle wheel's spokes, can perform way better, on a longer blowgun! Have you made a longer blowgun?!!

I fix it, but it doesn't work properly, it goes on loading, how can I make it work properly?

Which is better lkh9, tape or the bottle for the cones?and nail dart or bamboo?

which type of bottle i make cone.

Can i use Some Plastic From a mineral water bottle?

please do some hunting video!

What type of container did u use for hdpe bamboo dart?

Hi i am very late but my darts are not powerful enough and flipping halfway like the tip is not going first

Yeah but you didn’t show how to make the tracer darts. 😢

How did you make the darts glow