This is such a great series. There's really nothing else like it, or at least anything else this clear! Thanks so much for your hard work.

No INTRO makes ur video BETTER... Edit: 41 likes!!!😍😍😍😍

Im loving these everyday uploads

Have you ever thought about becoming a teacher? Your tutorials are the perfect mix of concise and thorough. Great job as always.

I loved this series! Came out at just the right time too! My solves have dropped 10 seconds this week mostly because of these videos!

The reason R' U R with left index push feels worse than R U R' with left index push has to do with corner cutting. With the former you have to reverse cut through for the last turn whereas with the latter you don't Same logic applies for left index flick U's and left index eido U2' and the righty versions of this style of turning Interesting theory about regrips hurting lookahead, I personally suspect that regrips aren't as big a factor for bad lookahead when compared to being unconfident and looking at the pair as you solve it (Basically everything I mentioned in my lookahead ramble). That being said everything you say about no regrips aiding lookahead is valid and I think as long as the no regrip way doesn't have an overly obnoxious fingertrick it's probably worth it (Basically any case where you have to reverse cut through a non traditional U style turn is something even I haven't been able to incorporate into my turning fwiw). Good video :)

this series was great! can't wait for the next one

This channel has some great content and is only improving, that's so nice :)

I really liked watching a new video everyday. I hope this format continues and i have improved half a second from this series. Keep up the great video quality!

These were some really great tips, thanks for the series!!

THIS IS THE BEST SERIES EVER THANKS

love this series of videos! very helpful tips

We need more of these series!!!

This series was great, learnt a lot!

I really like your short videos on tips. Keep up the good work!

These are great tips, keep them coming!

I feel like all other f2l tip videos I've seen are useless compared to this series Gj dude!!!

This was a great series. A lot of great points

This was a super cool series! :)

I am loving your small educative videos.....keep your good work bro.

These were really helpful, I like both the concept of small but more and long but less videos. I have the time anyway. Keep up the good work :)

I liked the tips! You should do more week long series like this

I appreciate the videos you uploaded recently because they are rare youtube cuber upload this days

I thought that this was a helpful video. Thank you for it.

This series should just be called 'VS Look Ahead'. Great video!

What a beautiful series

Your vids are so helpful thank you

No one can explain like you. You are always awesome. Cfop = Jperm

Amazing series✌✌ I learnt a lot of new things. Next please do some advanced OH videos

Good job bro.

Thats an awsm concept to upload shorter video cuz you had so much to teach in a single video but it was not possible to perceive at once,.........appreciate it

PLEASE KEEP DOING THIS VIDEOS

Legend Says If you are early No One Cares!

Make more they are awesome

all of j perms videos go straight to the point; no explanation needed, the title explains all

Just too good

Hey Jperm could you do a video which covers oll skip cases and winter variation?

This video is excellent. Thanks so much. Never thought about the importance of keeping thumbs in neutral position (on the front of the cube) when doing F2L. Makes complete sense for eliminating regrips and will help a ton when I make this second nature. One question -- does this same advice apply to the cross stage or is it necessary to be more flexible with grip positions? Just curious if there are any "best practices" when it comes to the cross stage and fingertricks?

Great video😀 could you please put the scramble on the screen!!!

Brodythecuber discussed this vid a little and he said that it has very minimal impact for pretty much everyone. Though he did say that when you get really elite then you can consider this.

I have a request,not related to this video.This video was great. Can u make a comparison video between the GAN 354 M and the GTS3 M. Would be really really reeeaaallllyyy helpful. How many of the viewers want this too? J Perm , whether or not u make this video,just put your thoughts in your next video. Anyways, love your videos , they are really great and helpful. keep it up.

Hiiii Jperm, I didn't see any video about final state of corner and other pièce, can you do one?

nice content

Great series.btw does anyone know what magnet scs used in the mf3rs2m?

Can you make a video on recognizing what Pll case you should do on a 4x4 when you have parity ?? And when is it better to do parity then Pll or Pll then parity ?? I mean generally how to improve your 4x4 Pll recognition and execution when you have parity

Thanks

what do u think about F moves during f2l? do they slow down a solve?

To all the cubers at this level: I assume you’re watching this because you’re feeling like your f2l turning is inefficient and you’re looking for the best technique to use in f2l. If that’s you, listen, if you’re at this stage, you already know all the finger tricks you need. You don’t need to learn more optimal technique, what you have to do is force your brain to start using the more efficient techniques that you’ve already learned in the f2l stage. The best way to go about that is extremely simple, what you need to do is slow down on f2l and consciously focus on avoiding rotations and regrips. Don’t reorient that cube at all. Sometimes in actual solves, obviously you need to rotate or regrip, but for this practice, avoid them entirely. That’s the golden rule here. What this will do is force your brain to apply the finger tricks it already knows to the f2l stage. Don’t worry about being optimal, just practice f2l while avoiding regrips and rotations like the plague, if you do that, you’ll form new pathways in your brain and you’ll start to see what’s optimal and what’s not. It’s like buying a tool set, you won’t need every tool in the set, but now you have a full assortment to choose from and you’ll simply use the ones you need to.

Hey J perm I can't do U2 with my left hand when my right hand is up as my right hand supports the cube to not lockup while doing U2 plz help

can you do a cube collection video

These videos have been super helpful. Would you consider maybe talking about when it is good to start learning algorithms for f2l and what kind of priority that should take over other things like learning Oll algorithms. Just a suggestion, I hope it wasn’t too dumb or rude. Thanks for all the help, I look forward to the next video. Keep up the great work

can you do big cube fingertricks?

This series was great i’ve been trying to improve on everything you covered with these tips. Ive been getting more consistent times within the last week by using these. This week ive hit my pb ao12 and ao100. This series really helped.

Hi! Can you make a review on the new YJ MGC V2 once you get it?

i am exited to get more cube at christmas but i have 3x3 average like 25 seconds and idk why i am not improving im trying so hard and im using these advanced tips and some look ahead

Number 9!!

More videos on 4 × 4 plz.....

HEY J PERM! DID YOU GET THE PROTOTYPE FOR THE YJ MYC V2?!?!

Nice videos, now just train until you get to a good level.

congratulations

Can you make video about zbll algorithm

Hey! J perm. Do i need to learn all algorithm in f2l written in pdf?

Can you do a video on edge roll method

hi from south spain

Hi Jperm, I am struggling with the M M2 M' finger tricks. Actually I am a right handed cuber. But I do the M M2 M' moves with my right hand. Idk but I don't felling good with this. I see the speed cubers do this like of moves with Their other hand means not do with their main hand. If you understand me, can you tell me what should I do......?

Oh! Why are you not use gan air sm?

How about a Cube Collection video?

Nice

hey. i hope you still reading this for some reason even though this vid is a little older. I just got my gts3m today and since youre using this one also...what lube did you use? I never lubed before since my aalong v2 was rather slow so I had to speed it up (with silcone spray). But as everybody knows by now the gts3 is extremely fast so any tips? Im from germany so i need to factor in a trillion $ for shipping most likely.

Hello there

im waiting for the yj mgc2 video

holy zemdegs how many 3x3s do you have

Did I miss where u show back and front without regrips .. Or do i rotate to turn them into r or L MOVES. I thought cube rotation was bad.

how you can do F moves?

3:57 you can just move your whole right hand to do the first U

Full oll plzz

I don't mean that yours video is bad, but I want faster. In fact , I changed from sub 20 on 3x3 to Sub 16. Thx j perm

hi j perm , i want to ask you that which stickerless cube i should buy

Howdy🤠

I have a really weird f2l habit, When I am thinking to look ahead I can do it, but when I forget to think about look ahead I totally fail. When I am thinking. I have amazing look ahead is the worst part. Any tips?

It is really hard to insert a pair with the cross.....do i have to

Will lubricant black core lube stain inner pieces of a stickerless cube? Or should I get another core lube for my gts?

Off topic: is it ok if I use the mirrored alg for the Ja perm?

I am sub -15 but I have very poor fingertricks ... ...but your video is so helpful that I picked up so many new tips. Keep making awesome videos!

For OH now please!!

Do you think ZZ cross is a viable method?

Please make a Video on how to magnetize a Gan 356 R!

J perm. Im full cfop and dont know what to make now

I use roux, but these videos were still very helpful.

please teach 4*4 plzz

Advance Tip: when you need to turn 2x instead of using your 1 finger you can use 2 fingers just like the Regrip on 2:39 look closely he uses 2 fingers to turn 2x 😎

Hey

I prefer daily vids

We use the same cube

Hey Dylan! With alot of practice, i have been closing in on becoming sub-10 with most of my averages becoming sub-13. I know my look-ahead is good but i feel like my tps is very bad. I drill algs and my turning is smooth most of the time but i just cant get my fingers to move fast enough! Any advice?

I have watched all your f2l advice. However, I still can't get a sub-10 cross+f2l . J perm can you give some advice for being sub-10 f2l?

What does pinned mean?

Hey j perm

Hey j perm there is a tip I want to say to you if you can please make that a video so everyone will knows it the thing is "memerize the peices you already seen so IG you get the current corner or an edge you will knows it is there if you understand it please make a video about it because there is a lot of people out there still working hard to get sub 15,10and all it will be a great tip see you later alligater

When you are going to do unboxing of gan356 x and 356 r