Exactly the way I would have done it...if I knew what I was doing, of course!

All that power & hydraulics, and that still is pretty darn physical work. Much respect.

I find it fascinating how you talk to the frame so to speak, and threw your expertise and shere brought force you get these truck frames straight as if nothing ever happened. Sometimes probably straighter then factory specs. Thanks for sharing your talents and wisdom with everyone Sir ! Stay safe and be Blessed. ✌️❤️🙏

Excellent content. Love this channel. 👍👍

Interesting work. I've helped straighten tipping trailers that have gotten twisted after falling over whilst tipping rubbish on a landfill. We didn't have that system, just chained down the axles and used the winches on our wrecker to pull it good. You're very knowledgeable in your work, it's good to see. 👍🍺

Looks great man. I run a frame rack at a frieghtliner dealership in upstate NY. I've learned a lot from watching your stuff, so I gotta say thanks for sharing. Don't work too hard!

Cool. I enjoyed the calm of the video w/o music, as someone suggested. But whatever you create is good. Thank you.

Hopefully a quality boot maker will work with you to get you some good free work boots to wear out. You are an artist, excellent job. Stay safe and healthy.

You sir have an amazing skill. I only hope if I should ever need someone with this skill I can get you. 😊

Thats some real world hands on experience there now. They dont teach that no where

Dam I did it again. I don't wait until the end of the video to comment and of course I see something else I want to comment on. I really think that this is just the beginning and you are definitely going places with this KZfaq shit your determination is very evedint. Oh yeah and you have definitely walked a few miles in those boots. You have the tread pretty much burnt off but the alignment appears to be dead on!!👍🇨🇦

More great content keep on bendin

HUGE Respect from a career A&P Mechanic. Your videos are fun and your skills - Epic. 👍🏼👍🏼

It is a lot of work for just one pull, very nice work. ATB from the UK

Excellent job with miss bob

Good work 👍👍

Finesse , the right pull at the right spot , that’s Finesse

I liked this channel so much I hit the like 3/times!

Good job bro 👍👍👍

You are the mater my brother. Love all your videos.

Honestly I miss hearing you narrate it but the format is great!

Awesome show Devin

Bendon if you do this KZfaq channel right & start making more videos & small tic tok type videos like you been doing this will make you plenty of money & have a good following

Shakedown on a city block in Houston will shake down dang near anything Haha Might even loosen fillings

Where's my Bob...very interesting job you got

I thought my chief ez liner towers were heavy…damnnnnnn. I can’t believe you got pneumatic rams man..that’s insane/I’m using hydraulic and it’s 123 power man.and way quicker. Maintain the oil and use her often and those line and rings will treat ya good. To each his own I’m pulling trucks your pulling rigs but you’d think some beefy hydraulic rams minus the pneumatic I mean powered by electric motor rams..you use Blackhawk porta powers or they have an even crazier brand for rigs? From one heavy tech to a super heavy tech aka rigs…keep that back good and healthy man only my very few know how we feel at the end of the day/night..

It's clear to see that you have a quality business by the equipment you have. I've seen and I bet you have as well some really sketchy ways of doing shit. Also you have been at it a long time and surely have had your fair share of "F" up's we all have em any chances you would share any of them with us? 👍🇨🇦

Looks like you definitely know what you are doing! Also looks like you need new boots to go with the knee pads 😊

Now that is cool. Sign me up !!

U the man

Most insurance companies demand that, you provide, some kind of print out that states, the pulling procedure was performed. And you're not going to get that, with gauges. They are quick. They are simple. However, even with gauges, it's still a trial-and-error process.

Bt mic maybe Boss, chat with us while still working, and not holding the cam. Kind like we say in Mexico keep walking, and peeping, when they are coming across.

😊👍👍👍👍👍👍👍

I get the gauge set is super simpel do how do you calibrate them when I think of cars and small trucks there frames have no standard . I'm assuming that large trucks have straight parallel frame rails so the as long as the gauges are set the same thay make a center line . To look across. Maybe more information on the gauges and how you set them up on different drive lines . Thanks lmuch love

When will someone finally invent the power ratchet binder? 🤣

Buddy Wts a part number for these frame guages

Drive the truck around the block without coolant?

Is that a new frame machine. ?

Have you tried the work pants with built-in knee pads? Far less bothersome than the tied-on ones. Just my opinion.

Is it hard to pull the whole front end off? I’m just an auto tech I have next to no knowledge about trucks and so forth and fuck do I have a lot of questions lol

Hope you the owner of the shop!

I really need to find his shop does anybody know where is it? I watched pretty much all of his videos no luck

🔥👊🔥⚙️🏍🔨🚜

Nice job, looking a the soles of your booth nothing wrong with your tracking either.🙃🙃 Do you always work alone?

Miss the narration, even if its added later. But cool video anyways 👍

Optimus Benden..

Where’s bob👍😎👊🏻

So aren't there things that are more rigid than the frame that are attached to it and subjected to the bending as well? Can you break something if you go to far?

Is bob at lunch or taking a smoke break?

How much does it cost to repair？Can you give me an address?

Don’t they make a computerized measuring system like we use in a body shop for that?

You need some new boots !

Where u located ?

This was cool and everything but I was watching Columbo, no more video releases between noon and 2 pm please. Thank you.

Knee pads are old school. You need a knee Creeper!

1. How the hell are you dealing with our heat/humidity? Down toward Freeport and I just melt in the garage. 2. Get new shoes, bud. You could downhill ski in those.

Why all the chains and hydraulics? Geeze, I mean just hit it with a hammer....😅

You need some theme music to your sped up videos. King of the hill into for example

Lasers are really overrated!