continue from where I ended last time
Angelo's friend Frank brought his messed up transmission.
Let's take a part and fix it.
I use MIDLAND AK-6 80w-90 oil for my tranny.
shop.midland-pro.com/store/pr...
Take off
0:26 a reason why this tranny f*cked up
0:57 How the synchros work
1:21 How to check the worn out synchros
2:18 Checking the hub
2:51 Put together the hub, the sleeve and the keys for 3rd and 4th gear
4:15 Checking the main shaft
4:52 Put the third gear in
4:52 Put the brand new third gear's synchro in
5:42 Put 3-4 hub&sleeve on the main shaft
6:14 Put the locking clip on
10:10 Put the second gear on
11:11 the second gear's synchro
12:16 Put togeher the hub, the sleeve and the keys for 1st and 2nd gear
13:51 Put 1-2 hub&sleeve on the main shaft
14:11 a small ball NO.1
15:20 a reason why the synchro has to stop the gear
15:56 The 1st gear and synchro
16:04 bearing inner race for 1st gear
16:47 the center bearing
17:14 center bearing stopper
17:33 a small ball No.2
17:39 the bearing inner race for back gear
18:01 the reverse gear and bearing
19:24 Put 5-R hub&sleeve on the main shaft
19:53 Hub stopper ring
21:03 5th gear and syncro
21:57 a amall ball NO.3
22:09 the spacer between 5th gear and rear bearing
22:52 the rear bearing
23:30 bearing stopper ring
24:57 speed meter drive gear
27:17 Put the needles in the inside of 4th gear
27:33 4th gear and synchro
28:05 check the function
天気予報は曇りだったのですが朝から土砂降り。
小さい庭にテントを張って作業をしました。
屋根付きガレージ憧れます。
次回はケースの組付けです。
動画３回じゃおわりませんでした。
#日米友好
To be continued