AE86 old-school nostalgia build. total transformation

Рет қаралды 94,958

Жыл бұрын

We get my nostalgia AE86 project fully rebuilt and dialed in, and man it sounds so good now! What a transformation.
You can buy some merch and help support the channel! - garagebuiltco.com
Tools Used
Milwaukee Bandsaw - amzn.to/2Zqn4OU With This Stand - amzn.to/3d5bqNv
Cheap Plasma Cutter - amzn.to/3hJdbS7
Milwauke Tool Die Grinder - amzn.to/2MoAQu9
Milwaukee Tool Headlamp - amzn.to/2xUWthH
Small Milwaukee Flood Light - amzn.to/2Sf39Ox
Milwaukee Tool Underhood Light - amzn.to/3f5K6jw
Milwaukee Tool Mid Torque 1/2" Impact(2861-20) amzn.to/3b1bqwG
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)- amzn.to/2Jdirid
Milwauke Tool 3/8" Ratchet (Life Changing) - amzn.to/2JcpQhy
Milwaukee Tool 1/4" Ratchet - amzn.to/35VZM41
Milwaukee Tool Ratchet Wrenches - amzn.to/2CYRFKz
M12 Drill/Driver - amzn.to/35QVZoR
M18 Drill/Driver - amzn.to/2p6WuKJ
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) - amzn.to/2VnbMHm
Gearwrench 3/8 Socket Set Deep - amzn.to/3b1pFBH
Multiprocess Welder - amzn.to/3g6y5dK
Drill Bits - amzn.to/3fc4DkZ
Thanks to all who support me on Patreon! - www.patreon.com/taylordrifts?...
IG - / taylordrifts
Twitter - / taylordrifts
Email For business Inquires - taylordrifts@gmail.com

Пікірлер: 182

@alexnorwood5789 Жыл бұрын

Not gonna lie.. Taylor changing his picture for youtube tripped me out a lil bit 😂

@jacobrice9596 Жыл бұрын

Has thrown me off so much

@BaldBozo Жыл бұрын

Same. I like the new picture, but I don't recognize the upload immediately.

@aaronpanietz Жыл бұрын

Wonder how long it would’ve been before I even noticed!?😂 ty

@Cubeee Жыл бұрын

Yeah the first day he changed it i was so confused. But obviously realized who it was pretty quick

@Alex-vz2jz Жыл бұрын

Yeah, i noticed he changed it a long time ago and everytime it question if i clicked on the right channel/video 🤣

@adamf3894 Жыл бұрын

Josue is the MVP. Seriously, that dude is the perfect compliment to Taylor's frenetic nature. Can't wait to see them fielding an F1 team haha.

@blackinblue11 Жыл бұрын

Yeah, and their trash talk is enjoyable:)

@captainjacksnap Жыл бұрын

A KZfaq F1 team would be bananas, it would have to be such a wide ranging collaboration to make happen but that would be such a cool team

@adamf3894 Жыл бұрын

@Jack Snap all I wanted with my life was to work in formula 1 as an engineer. It wasn't to be. Here's hoping!!

@offroadspecialties7383 Жыл бұрын

The most important factor to setting up a diff is not preload or backlash. It's pinion depth and thus gear pattern. You can have perfect backlash and preload with a pinion that's too deep or too shallow and it will howl and kill the gears. I hope you put some marking compound on those gears and checked the pattern.

@TechToolsMichael Жыл бұрын

You sir are very right.

@timothycarey3883 Жыл бұрын

He said he checked and got a good pattern.

@wobblysauce Жыл бұрын

Yep, I like the drag method of preload. But teeth are the reason most fail

@shawnhampton9686 Жыл бұрын

I've been setting up diffs for 30 years. I'm not going to lie it's a little painful watching him set this up. But he got it done.

@roachwerks3043 Жыл бұрын

@@shawnhampton9686 i dont think he realized he could make a setup bearing with the old bearing lol. no pressing. ive watched it done a few times

@joshuabalding3794 Жыл бұрын

It's 1:20 am I just got done wrenching on my golf. This shall be my sleep music

@dakotafrench9001 Жыл бұрын

I love Josue. "Thats my job!" Then watching Taylor jist walk away from the door chain 😂😂

@DjDubStak Жыл бұрын

Man where would u be without Josue. That dude is the perfect compliment to you. Great job on the diff. I don't have the patience for that.

@xdboardsurfer Жыл бұрын

There's nothing like that First-Drive-After-Repairs feeling.

@bostynbeynon3808 Жыл бұрын

Holy shit man I watched your videos for years when I was younger and to come back now and see how far you’ve come is absolute crazy congratulations mate

@maxbakken8521 Жыл бұрын

Here’s a few tips for next time. Cut up an old bearing use the inner race to press on the diff bearings Ring gear, throw it in the oven to heat it up to slide her on.

@shredct3118 Жыл бұрын

So stoked that you’re coming up to English Town for the world tour .

@danger_mouse_ Жыл бұрын

When setting up depth, I always get a second outer pinion bearing and open up the bearing's ID so the tolerance fit is gone and it can be installed by sliding it on and off the pinion. Eliminates having to mess with pressing it on and off during set-up.

@doublea9482 Жыл бұрын

Josue keeping T Ray sane. Lol great team work!

@motomatt3763 Жыл бұрын

Bro... Get an extra pinion bearing and use a small burr on a die grinder and open up the inner bearing so it will slide on and off the pinion. Then you can just slide it on and off while you get your shim pack at the right thickness. Then press on the other bearing after the shims are sorted out...

@mixedcargarage3781 Жыл бұрын

“It’s super lean” and continues to drive it decently hard ahaha.

@2f-yak Жыл бұрын

Love the AE86 uploads! Can't wait to see the new carb setup! My guess is you've got some Keihin FCR carbs for it, they're a very common bike carb set ran by oldschool AE86 d1gp pros like Imamura, Ueo, Kaicho and Gen Terasaki from GT Works. If it worked for them it will for sure work for this one!

@Taylordrifts Жыл бұрын

Yep that’s the plan! I ordered some but now they’re not responding. We’re supposed to ship a week ago 😅 hopefully I get them in soon. I’ve heard great things!

@2f-yak Жыл бұрын

@@Taylordrifts Thats awesome! Can't wait to hear the amazing clack idle and intake noise when its all put back together with them, the throttle response is gonna be out of this world! One of the popular things to do with them for reliability is to change the plastic rollers on the slides for actual bearings and bearing guides, so if theres a very tiny dent inside the slide housing from a bike being held at a certain rpm alot, caused by the stock roller on the slide, the rpms wont stick in that spot when you let off. Kaicho on his channel runningfree86 on the video "FCR SEPベアリングガイド AE86 LIFE with SEP BEARING GUIDE English Dub" goes super in depth with FCR Carbs on his AE86!

@JohnAustin1223 Жыл бұрын

These videos give me so much drive for my 86

@740RCCRALWER Жыл бұрын

Bring the Monte Carlo back

@gr0mania 7 ай бұрын

I was literally looking at the muteki set. Glad to hear good things about them.

@Jcarney87 Жыл бұрын

Pump those keihin jets up my guy. Most power sports shops that sell quads bikes dirt bikes will have cases of jets for around 5$ a jet. Probably need a couple sizes on the main and a size on the pilot. Your mid-range tuning will come from dropping or raising the needle a clip.

@joesfabshack6464 Жыл бұрын

I really enjoy how in depth this gear set up process is. Still teasing me with the magnetic coozie that I ordered one of in October and still never received. I've sent multiple emails and never heard back. Keep up the great videos.

@OlderthanIlookyoungerthanIfeel Жыл бұрын

White lithium grease on the teeth of the gears will give you a good indication of tooth engagement .

@cbdreamer1709 Жыл бұрын

I want Monte Carlo update! So cool. Thanks dude

@cbdreamer1709 Жыл бұрын

I would love to see a cleaned up engine bay. Delete everything. Let her eat

@whiskeyriver8578 Жыл бұрын

Use the old bearing for measurement. Just sand down the inside so they slide on to the pinion. It makes it easier to get it done with out pressing them on and off. Once your good throw the new bearing in and double check.

@martinbernath Жыл бұрын

So glad you installed that wideband o2 on it finally. It will make your life a lot easier. Now you just need to build a diy balancer and you will be able to tune any carbs in no time, if you have spare jets and drill bits.

@ronjones-6977 Жыл бұрын

After AngryCops "stream," I needed something organized and calming. Taylor Ray to the rescue. (AC's stream was a HILARIOUS failure.)

@MrAcepilot72 Жыл бұрын

Thank you guys for bringing light to the 4age engine❤️

@taloncollins4324 Жыл бұрын

I love that you are doing a nostalgic build. I feel like that is hard to find these days!!!

@battleaxe1985 Жыл бұрын

for tomei/kaaz diff break in, factory kaaz specs say you can use regular gear oil to break in (your figure 8's on/off throttle for 15-25min, drive around a little, then drain all that metal filled fluid out, then pop in the nice tomei/kaaz oil. done this on all 3 of my kaaz/tomei diffs...as a late heads up...and the wideband is supposed to be x inch from the head flange as well so could have put in the exhaust where its supposed to go and then your header choice wouldn't matter. heat sensitive and all that.

@YMBFT Жыл бұрын

I love how informational all your videos are

@Yulla_mx5 Жыл бұрын

Aem make a analog style wide band gauge if you want it to look a little bit old school

@johnd.2620 Жыл бұрын

Taylor that lsd is not lubricated well enough, mine did the same thing its the clutch plates chattering you need to douse the clutches in fluid before you install them in the clutch pack. you can also use lsd additive to get rid of the noise, also a good diff fluid.

@alessioanania295 Жыл бұрын

we need a full shop tool tour

@winiary_taniegruzy Жыл бұрын

AEM does have an AFR gauge that's classic looking, just a 270 degree sweep needle, looking like classic VDO gauges. Would look cool in one of the air vents.

@240Trevor Жыл бұрын

Dude this thing is so sick!

@deathshotspeedshop Жыл бұрын

Ooo Taylor posted I’m there😎

@DIXIEGARAGE Жыл бұрын

i put my gauges in the driver side air vents. they looked great.

@RearEngineShop Жыл бұрын

Love this car man! This era of cars is my thing. 🤘

@ChrisLuffman Жыл бұрын

Love it keep up the most excellent work. Thank you 😊

@jersh1046 Жыл бұрын

I had the same noise with my clutch type lsd in my 86. I now run a conventional gear lube with a lsd addictive. It got rid of the clunks from the clutches.

@ClimptonDiddlehopper Жыл бұрын

The crush sleeve has been used for a hundred years with no problems. Only time they have issues is with improper installation. Blame the builder not the part.

@fabiocarra1997 Жыл бұрын

21:48 Josue: "it's MY JOB!"

@JohnRoberts71 Жыл бұрын

Great content thanks for sharing

@DuckyFuzzer Жыл бұрын

this car is looking so clean

@cheesepizza87 Жыл бұрын

The cefiro is all one colour ! Mannnn the stable is strong, so good to see how happy you are dude

@ryanwalker388 Жыл бұрын

Your 1/2 slip diff will make noise. This will be amplified through the car when you put solid bushes in it. The squishy rubber keeps some of the noise out of the unibody. I just picked up a 1981 sr5 that I will be playing with. I have done many old school Toyotas. I prefer the old 2 and 3tc engines for the sake of true old school. Loving the 86 content.

@mayhemmayo Жыл бұрын

KEEP UP THE GOOD WORK

@midwestdave33 Жыл бұрын

It could be reading lean because the O2 is downstream from a non-sealed connection there were the springs are where the header converges.

@cbdreamer1709 Жыл бұрын

Great video. Amazing video

@beaupaech551 Жыл бұрын

Autometer do a cool period correct analog wideband gauge.

@ClimptonDiddlehopper Жыл бұрын

If you want to heat the ring gear to put it on its best to have a couple of studs to guide. Then do the freeze the carrier and heat the ring gear trick. Works every time.

@jamescruzCwS Жыл бұрын

That Steering Colum Flip wheel is so sick

@Ciocho Жыл бұрын

More of this car please!

@cl0_dy714 Жыл бұрын

Love to see it

@kaizousha5531 Жыл бұрын

Damn that's crazy the hylomar worked in the Miata dif. It's more of a gasket dresser, not a liquid gasket but you might be on to something if it does work. Mainly made to hold o-rings and seals in place while you bolt it together.

@aziwilliams1352 Жыл бұрын

God I love yhe Cephiro. You really did a great job on the build

@aziwilliams1352 Жыл бұрын

I know this video is about the 86 but I just love the Cephiro

@brentsimpson4101 Жыл бұрын

Taylor, your videos are so consistent. Appreciate the contact brother.

@speedup Жыл бұрын

i work in a dealer and i have never seen a crush sleeve get loose over time...

@ryanlott6309 Жыл бұрын

Not only with carbs do you need to set the fuel mixture correct but they need to be balanced as well.

@ryanhacker9444 Жыл бұрын

Least favorite build by far, but glad you are enjoying it!

@mathieusynnott8915 Жыл бұрын

I can't wait that the cefiro and ae86 being sold and put effort in the SS and the miata and the next fabrication build.

@Soulbain85 Жыл бұрын

Don't the Legend cars use the rear end out of a corolla? Thought I read that somewhere, but loving the AE86 series!

@jamieduckworth5946 Жыл бұрын

Be fun to see flat slide carbs again. Haven't seen those in years. Helped put them on a CBRR 900 years ago. Think it was 99 idk

@rickymitchell2014 Жыл бұрын

I just had the solid sleeve installed in my 1970 gto my mechanic insisted on it

@scottellis6438 Жыл бұрын

Looks great would be cool to see it on some wider tires

@Kweeftard Жыл бұрын

HELL YEAH!!!

@Essencials Жыл бұрын

With the Cefiro bumper and stock hood back on must mean it’s on the way out the door. Rip Cefiro.

@teshire9075 Жыл бұрын

Hylomar blue is great, use it in assembling rotary engines to help hold in the water jacket orings and in sealing the foot where the housings and irons join the sump

@ktga67ish Жыл бұрын

I forgot about that stuff! I used it for the same thing about 18yrs ago when I was rebuilding and porting a 13b in my old 87 RX7.

@teshire9075 Жыл бұрын

@@ktga67ish 84 rx7 here. Half bridge, dowled turbo 12a. Rotaries are so much fun to work on 😅

@bman192100 Жыл бұрын

Use two copper wire and witching it. Where the the water is coming up in the drive way

@willhutchins00 Жыл бұрын

Live stream soon taylor? Loving this series!

@theresjustnotellingfpv4822 Жыл бұрын

I bet your happy to have the press air powered. :)

@corex72 Жыл бұрын

I use permatex aviation sealant. Sounds like the same thing as that blue stuff.

@adamkamm6331 Жыл бұрын

Freeze your races. Makes it so much easier

@josephsamsor1698 Жыл бұрын

Idk how it works on cars, but for motorcycles, a “4 into 1” header creates a very cool sound. Wonder if that’s a thing for cars or if it creates a similar result.

@codywhitehead Жыл бұрын

Diffs are probably the one thing I'll pay someone to do Haha

@joec9680 Жыл бұрын

You should consider a triple stacker 4 post lift to store your “race cars”.

@offgridas Жыл бұрын

Just as you started your car I heard my girlfriend coming up the driveway in her 4age Levin. Weird timing, hearing all the throttle bodies. 😂

@martint8986 Жыл бұрын

Josuès Fault :- would make a great little sticker 😂

@addictedtoboostbp Жыл бұрын

Gotta get that top end tick taken care of

@marceldefries2943 Жыл бұрын

Did you consider putting the gauge in the air vent on the door side? Would look clean and neat there

@gatekeeperoffroad4252 Жыл бұрын

You should have gotten an extra bearing or use the old and make a set up bearing

@vwclub3 Жыл бұрын

So worth the $10-20 to make setup bearings

@Chris_ST0224 Жыл бұрын

Came for the blue lug nut socket…. Didn’t see a link!

@klm2fm4 Жыл бұрын

Just curious, wouldn’t you want to torque the ring down before getting the lash set, as it might change slightly as it tightens, or is it inconsequential

@ktga67ish Жыл бұрын

Instead of pressing it on/off a million times I use the old bearing as a “dummy” bearing by taking a small amount of material out of the center of the bearing so it slides on/off the pinion. Usually use a die grinder. Too late this time but maybe it’ll help next time.

@FrankTheKoyFish Жыл бұрын

did you uh… remember to tighten the diff when it was assembled like you said before you put it in the housing lol

@Disneymkvii Жыл бұрын

"I'll link that below". Well.... We're waiting!

@xLUGUBRIOUSx Жыл бұрын

Play with the carbs. Experience is Experience lol.

@j.p.1576 Жыл бұрын

You need a media blaster.

@dylannewby3926 Жыл бұрын

Dear Taylor, could you please build a custom storage solution for the loose hardware sitting on the hoist arms 🙂🙂

@timmynolan8786 Жыл бұрын

Lets gooooooo

@mrmanny Жыл бұрын

Flat-tops? Sounds like It's going to be a NO, on installing an LSD w/4.88s into my Tacoma 😂 Love the Corolla content 😎

@t98765af Жыл бұрын

Where do I get the tube used to install the dust covers?

@232Stangpwr Жыл бұрын

Did you ever torque the ring gear bolts?

@TearothDK Жыл бұрын

Where can i buy those extended studs, Taylor?

@mattmanyam Жыл бұрын

Did you hook up the vacuum to the CV port?

@excitingstuff8209 Жыл бұрын

Showed us my favorite two cars you have lol sorry the miata is third ❤

@gr0mania 7 ай бұрын

When you tighten the lugs on the wheels, are you using a regular drill or impact driver?

@formerlyknownas07 Жыл бұрын

Would the wideband fit in the air vent?

@ricknoah9184 Жыл бұрын

How are you liking dropping to 4.3 ratio ?

@brandonlow27 Жыл бұрын

I'm putting an AEM wideband in the glove box of my Miata because I also think it looks out of place