Thanks John, the screw are Torx head and the Test Mode was is a method I obtained from another KZfaqr 😎.

I think they are well designed and constructed. Poor maintenance is what leads to the problems you see in this video. The filters are supposed to be cleaned @ certain intervals but because they are hidden they are neglected until the machine breaks down 😂.

@@green-crocs-fixes1520 I can believe that. I vacuum my filters every couple of weeks. It keeps the appliance working at optimum & I really look after my stuff try to keep it like new. I love learning how to maintain things properly too.... it's a great video with tedious parts speeded up in just right places. I watched one where the guy filmed removing all the transit bolts in real time. I skimmed along the video. Your's are very well filmed and edited with perfect commentary. You are a great teacher. 🙂

@@FLOSSYTREADWELL flattered, thanks 🙏🏿

Totally agree Janet, Pink Stuff is an odd name for an excellent household cleaner.

Thanks Janet 😀.

Thanks Mehmet, happy to help 😀.

Thanks Tiger, happy to help 😀

Hi Amirthaa, you can try Vacuuming the lint with your Hoover with the brush attachment when the unit is dry. My method is not recommend and only executed as this machine had been heavily not maintained and discarded. Regards.

Hi Maciej, sounds like a blockage in the Pump or it’s Pipes, also a major build up of Lint/Fluff within the Condenser unit will obstruct the drainage.

Hi Bostel, yes try cleaning with compressed air. i the unit warm to the touch at the back where the Fan is located ?

@@green-crocs-fixes1520 I didn't check the temperature of the back side of the machine yet.

@@Bostel83 OK suggest letting it run for about 15 minutes then check. Could be the Dan not spinning due to a Capacitor 😀.

Hi Mohammed, possibly a Moisture Sensor or the unit may require a Gas refill.

@green-crocs-fixes1520 thanks

​@@green-crocs-fixes1520same problem here. If the moister sensor was faulty, and the compressor is running. Than the copper tubing should get hot and other side cold anyway right? Here it stays all same temp and compressor motor gets over 60deg.

@@arthurganz Hi Arthur, no the motor unit got warm because of the heat from the Condenser sent to it, but because it was not spinning hot air was not blown into the Drum, initially I was not aware of this until I removed the Motor assembly and visibly saw that it was not turning.

Hi Alan, if you place the machine into test mode ( see; 22:47 ) this should display an error code which should point you toward the error. Regards 😀.

Hi Alan, maybe your Motors stop/start Capacitor

Thanks H 😎.

Hi HollanData, sounds like an issue with the Pump, possibly a blockage or malfunction. Check the Red and Clear popes are not blocked.You can see these at 5:20. Otherwise remove the Pump as it is probably clogged up. Regards.

@@green-crocs-fixes1520 thank you 🙏

@@hollandata Thanks, happy to help 😀.

Hi again, İ willl try to clean this red pope as you did, first i will start the test mode and mode 3, than put pink thing to clear. İ will trey this first time :) wish me good luck. Do i need to pay attention anything in thisnprocess?

Thanks Jony 😎.

Just a couple of cleanings clothes (ex tea towels) used to test the machine Janet 😀.