Aero precision EPC 9mm complete build

No video

Aero precision EPC 9mm complete build

Рет қаралды 22,967

Mario Pagan

Күн бұрын

Aero Precision EPC 9mm complete build

Пікірлер: 37

@reptilejunkie8976 Жыл бұрын

I like the part where you assemble part of the trigger off camera.

@MadMetalShop Жыл бұрын

Not the part where the hammer spring was installed upside-down? 😏

@zeebull6908 Жыл бұрын

Can you redo this with the receiver and hardware actually in the camera frame?

@stevewestmoreland3987 2 жыл бұрын

Great video and timing up to 4.50 where you go out of camera frame. Keep up the good work but you may want to watch the framing.

@boomstickdefense6237 2 жыл бұрын

Hard to tell what you're doing when you do it out of frame.

@armasydefensa1513 2 жыл бұрын

Sorry, I made one where everything is on frame but they (YT) took it off.

@boomstickdefense6237 2 жыл бұрын

@@armasydefensa1513 No worries. Between your video and another I was able to figure things out. Thanks for reply.

@Eddie87Grant Жыл бұрын

@@armasydefensa1513 Yep, we've got good ole censoring you boob to screw things up.

@cmorekake00 9 ай бұрын

I got a magpul grip but screw didn’t go in. Just the tip. I didn’t force at all. Even without the grip

@RichardT123456789 2 жыл бұрын

Nice video , I just got my Aero EPC lwr this weekend .. do you have a build list ? Thanks

@sirlukkes Жыл бұрын

You should work in the camera frame,

@pab1ofresh529 6 ай бұрын

could you do whole video over again with explanation

@matthewoliver1347 Жыл бұрын

Thanks for taking the time to record and post. Pay no mind to all the “out of frame” Police.

@armasydefensa1513 Жыл бұрын

I’m glad you liked it. I had one before this one in full frame and YT took it off. That’s why I did this one like this. Is not a “how to” video.

@Neza1234 8 ай бұрын

What kind of butstock is that?

@robertwoods6225 2 жыл бұрын

😎

@David-jc2uq Жыл бұрын

Hi what parts kit did you use ?

@armasydefensa1513 Жыл бұрын

Aero precision

@trinidadmartinezsr Жыл бұрын

Nothing is in the camera.

@jayram0506 2 жыл бұрын

What size barrel? 16"

@armasydefensa1513 2 жыл бұрын

Yes

@tonydimonaco8745 2 жыл бұрын

what is that little set screw for

@armasydefensa1513 2 жыл бұрын

Is for the bolt catch, the new AP lowrs are coming with that system. No more scratches on the lower

@CashRules203 2 жыл бұрын

What did you use a paper clip?

@armasydefensa1513 2 жыл бұрын

@@CashRules203 small ale wrench

@matthewjahn1177 Ай бұрын

Useless

@MadMetalShop Жыл бұрын

Your hammer spring is backwards. No good detailed shots. Quick out of frame shots. But mostly YOU PUT THE TRIGGER SPRING ON BACKWARDS 🤦‍♂️

@armasydefensa1513 Жыл бұрын

Pay attention to when I pulled the trigger a few seconds after I installed the trigger. It would not work backwards.

@MadMetalShop Жыл бұрын

The hammer spring! Not the trigger spring. I've watched the scene a dozen times and even paused and screen captured it. Your hammer spring is 100% upside-down in this tutorial 🙄

@armasydefensa1513 Жыл бұрын

@@MadMetalShop I guess my hammer spring is the only one that works backwards. Over 1000 rounds still working. Cheers my friend

@MadMetalShop Жыл бұрын

@Mario Pagan why does everyone think 1k rounds is anything to report on? Thats nothing man. I'm sure it works but this is supposed to be a tutorial am I wrong? These things need to be correct if it is to be a tutorial. It also doesn't exactly show competency when something as simple as a common hammer spring being installed totally upside-down. I'm just being honest here. It doesn't seem like you've built very many of these if any at all. I would have at least reshot that part. Secondly while I'm sure it works.... that's not the way that spring was intended to be loaded or sprung. You'll probably wear it out faster at the very least. You're putting more pressure on the coils than it would have if installed the correct direction.

@armasydefensa1513 Жыл бұрын

But it’s not a tutorial. It’s my build. Anyway thanks for watching it 1000 times.