AEV ProCal SNAP Installation: Detailed Instructions

Рет қаралды 14,481

Күн бұрын

⬇️MAIN TOPIC:
This video illustrates detailed instructions for the AEV ProCal SNAP installation. Special pointers and visuals are provided throughout the video.
⬇️TIP:
A tip on determining the correct pressure when running larger tires is shared, along with a reminder that the AEV ProCal SNAP can then be used to adjust the threshold for the TPMS minimum tire pressure alert.
⬇️MAKE¢ENTS:
A subscriber shares a tip on using 303 Aerospace Protectant for wheels, and Turtle Wax Ceramic Coating for the body of your Jeep.
303 Aerospace Protectant: amzn.to/2PyGZIM
Turtle Wax Ceramic Detailing Spray: amzn.to/3eCQfnM
* Where possible, Affiliate links are used for products featured in the videos. This means that should you decide to make a purchase through the provided links, CheaperJeeperTV will earn a small commission that will go towards supporting the channel. Thank you. *
(DISCLAIMER: Any and all content provided on the website and KZfaq channel is Cheaper JeeperTV’s opinion and for educational and discussion purposes only. Seek a professional’s advice where appropriate for your vehicle.)
www.CheaperJeeperTV.com
CheaperJeeperTV CheaperJeeperTV
⬇️ Things used in the making of this video:
1. Canon M50 4K Camera: amzn.to/2ZXPFZZ
2. Sennheiser MKE4 400 Microphone: amzn.to/2QRJGBZ
3. Camera Tripod: amzn.to/2ZRjfjM
4. My MacBook Pro for editing/uploading: amzn.to/2ZTb6eC
⬇️ Items Featured In This Video: www.CheaperJeeperTV.com/featured-products
⬇️Music:
Catch Up - Dan Lebowitz - KZfaq Audio Library
Finland - KZfaq Audio Library
Sunset Dream - Cheel - KZfaq Audio Library
Sunny - Bensound Royalty Free Music
Take Your Time - Dan Lebowitz - KZfaq Audio Library
Welcome to the Show - Kevin MacLeod (incompetech.com) Licensed under CreativeCommons: By Attribution 3.0 License CreativeCommons.org/licenses/b...
Whistling Down The Road - Silent Partner - KZfaq Audio Library

Пікірлер: 113

@spyderbender 3 жыл бұрын

I think a good safety idea would be to take a picture of the existing wire harness on the OBD port before you unlatch the wires in case you accidentally pull out the existing wires when installing the additional 2 wires..

@CheaperJeeperTV 3 жыл бұрын

Hey Russel, That is brilliant! I worried about that when unlatching the side catches. I've pinned your comment. Thanks for the tip! Cheers.

@mikepierson3097 3 жыл бұрын

Honestly, even when you unlatch the retainers on the plug it’s an absolute PITA to pull the connectors out unless you have the proper tool.

@CheaperJeeperTV 3 жыл бұрын

Hey Mike, I did notice they are in pretty tight. I guess those pins, and the catch click in pretty good. Thanks for the info. Cheers.

@gs98999 2 күн бұрын

Amazing video. I'm about to do this for my 2023 Gladiator that I lifted with the AEV kit, read the instructions and then decided to go to youtube. Found your video and there is no way I would have got this right without your help. Thank you very much. Looks like 3 years later this is still helping people!

@CheaperJeeperTV Күн бұрын

That is so awesome to hear!!!! Thank you so much for the kind feedback. Cheers.

@crorad Жыл бұрын

After struggling with the AEV directions for about an hour my final result was the dreading blinking orange on the Snap. I then found your video which was a lifesaver! Thanks so much. AEV should post a link to your video.

@CheaperJeeperTV Жыл бұрын

Hey Tibor, I appreciate the feedback. I’m glad you found the video helpful. Cheers

@MrXJeep 4 ай бұрын

Thank you, this made installation a breeze on my 2020 Gladiator. This video likely saved me a ton of time and frustration. While AEV provides great products, their instructions leave much to be desired.

@CheaperJeeperTV 4 ай бұрын

I agree. Hence the reason why I made this video. Please feel free to share it, even with AEV.😂

@evltwn219 Жыл бұрын

Thank you. I had a hard time seeing which way the side clamps opened and was afraid to break them in the process. This was super helpful.

@CheaperJeeperTV Жыл бұрын

Hey Brian, You are very welcome. I’m glad the video helped. Cheers

@grizzbuck 3 жыл бұрын

Excellent instructional video! Your use of video, graphics, & explanation make it feel, as if, anyone can tackle whatever project you're showing. Thank you for all the effort you put into each video.

@CheaperJeeperTV 3 жыл бұрын

Hey Dennis, I really appreciate the feedback. Thank you very much.

@AlaskaWoody Ай бұрын

Excellent video thanks

@CheaperJeeperTV Ай бұрын

You are welcome. I’m glad you found it helpful. Cheers.

@degreeofreadiness497 2 жыл бұрын

Thank you for this video. AEV should post on their website for install. You got me through install with your instructions. GREAT JOB!

@CheaperJeeperTV 2 жыл бұрын

Hey, glad to hear that. You should make the suggestion to them. Glad the video helped. Cheers.

@johnsminth9891 2 жыл бұрын

Thank you very much for the video. I just installed the ProCal today following your instructions. Amazing video!!!

@CheaperJeeperTV 2 жыл бұрын

Hey John, Thank you so much. I’m glad you found the video helpful. Feel free to check out some other videos. :-) Cheers

@stevens8744 3 жыл бұрын

You are a legend, thanks for the video, just installed mine after putting on my 285/70/17s with Savegre II's aswell. thanks!

@CheaperJeeperTV 3 жыл бұрын

Hey Steve, I'm glad you found the video helpful. Cheers.

@KialLn 3 жыл бұрын

Used your video today. Thank you!! Got it all dialed in nicely.

@CheaperJeeperTV 3 жыл бұрын

Hey Kyle, That is so awesome!! I’m glad the video was helpful. Thanks for letting me know. Cheers.

@bigboybiker2431 3 жыл бұрын

Thanks for the great video! Explaining everything that I had questions on during my Procal Snap install!

@CheaperJeeperTV 3 жыл бұрын

Hey Big Boy Biker, I only found two other sources on KZfaq on the install, which were too vague. I found some more info on the forums, and added the extra detail in my video. I'm glad you found it helpful. Feel free to share. ;-). Cheers.

@tomtommy2227 3 ай бұрын

Great video! Thanks

@CheaperJeeperTV 3 ай бұрын

I appreciate the feedback. Thanks. Cheers

@wingman6968 2 жыл бұрын

Heck yeah man you saved me from having to do so much research on this so glad you made this video!

@CheaperJeeperTV 2 жыл бұрын

Hey Wingman696, Awesome! I’m glad it helped. Cheers.

@pra3t0rian 3 жыл бұрын

Great video. Thanks for the clear narration!

@CheaperJeeperTV 3 жыл бұрын

Hey pra3tOrian, I'm glad you found it helpful. Cheers.

@davidhartlein2672 4 ай бұрын

Cannot thank you enough for this video! Saved me a ton of time reasoning through sketchy instructions, with the result a perfect install. Thank you sir!!

@CheaperJeeperTV 4 ай бұрын

Awesome. Glad to hear the video is helpful. Cheers.

@mikepierson3097 3 жыл бұрын

Very nice job of describing how to lift the retainer clips and the correct orientation of the plug for the pin placement. Wish you had made this video 4 months ago when I struggled with this part of the install. Haha

@CheaperJeeperTV 3 жыл бұрын

Hey Mike, I know what you mean. I scoured the internet and the forums for something like this. Once I figured it out, I thought I should show it in a video for others who might be looking. It isn't an academy performance, but it should help...lol Thanks for the feedback. Cheers.

@solartech3640 Ай бұрын

Thank You So Much Sir.

@CheaperJeeperTV Ай бұрын

You’re welcome. I’m glad you found the video helpful. Cheers.

@efejoao 3 жыл бұрын

Awesome video! Congrats and thank you

@CheaperJeeperTV 3 жыл бұрын

Hey João, You are very welcome. I appreciate the feedback. Cheers.

@roamingwithrob7179 3 жыл бұрын

Just installed mine today, thanks for the tutorial.

@CheaperJeeperTV 3 жыл бұрын

Hey Roaming With Rob, Awesome! I'm glad you found the video helpful. Cheers

@andrewglover1564 3 жыл бұрын

Great video. You saved me lots of time. Thank you.

@CheaperJeeperTV 3 жыл бұрын

Hey Andrew, You are very welcome. I’m glad you found the video helpful. Cheers.

@nitroxide17 3 жыл бұрын

You are a life saver!

@CheaperJeeperTV 3 жыл бұрын

Hey nitroxide91, I’m glad you found the video helpful. Cheers.

@randylowden1902 3 жыл бұрын

What a super procal tutorial!!!

@CheaperJeeperTV 3 жыл бұрын

Hey Randy, Thanks a lot. Cheers.

@mikemurphy43 2 жыл бұрын

Thanks for the video it helped tremendously.

@CheaperJeeperTV 2 жыл бұрын

Hey Mike, Right on! Glad to hear. Cheers.

@StanSeo Жыл бұрын

This is the best Tutorial ever, Thanks a million!! 😀

@CheaperJeeperTV Жыл бұрын

Hey Stan, Thank you for the feedback. I appreciate it ,and I'm glad you found the video helpful. Cheers.

@AngryOD1N Жыл бұрын

Stupid helpful!!!!!!!!!!! Hated the wire plug in on the obdii port but this video was a lifesaver nonetheless! Thank you!

@CheaperJeeperTV Жыл бұрын

Awesome! Glad it helped. Cheers!

@mattheww8062 2 жыл бұрын

Great video! Thank you! Was wondering why the wiring harness was included… nice job, AEV in not even acknowledging the harness in the instructions.

@CheaperJeeperTV 2 жыл бұрын

Hey Matthew, Thanks and you are welcome. I found that any instructions out there, either in the manual or on KZfaq were lacking, so I thought making this video might prove helpful. Thanks for watching. I'm glad you found it helpful. Cheers.

@danibbs 3 жыл бұрын

That was a great video full of information. I loved the graphics you added to help visualize the information. I'm guessing your next video will be how to do a chalk test on your tires.

@CheaperJeeperTV 3 жыл бұрын

Hey Greg, That definitely can be a future video for sure. Cheers.

@ducatifriedrich2910 Жыл бұрын

Thanks a ton for this!

@CheaperJeeperTV Жыл бұрын

Hey ducati, You are very welcome Cheers

@sweetpotatomotovlog Жыл бұрын

amazing video! keep it up!

@CheaperJeeperTV Жыл бұрын

Thank you. Cheers

@nickdouglas9298 2 жыл бұрын

Great video

@CheaperJeeperTV 2 жыл бұрын

Hey Nick. Thank you. I’m glad you liked the video. Cheers.

@josemanuelmedina778 2 жыл бұрын

Great video!! Can you tell me please how to calibrate tire pressure? Thanks a lot!!

@CheaperJeeperTV 2 жыл бұрын

Hey Jose, I think it’s described on page 6 at this link. I hope it helps. www.aev-conversions.com/wp-content/uploads/2020/02/JLJT_SNAP_Booklet.pdf

@robl6044 3 жыл бұрын

That was a great information on it so does it change the sift points when. Driving and how do you like it as my. 35 wheels and tires will here next week and how about your gas mileage. And sometime you should come to Brantford to meet our Jeep club on a Sunday

@CheaperJeeperTV 3 жыл бұрын

Hey Rob, I love the handling on the Jeep. I think the backspacing, placing the tires out a little actually helps my handling. As for the gas milage, it has suffered a little bit as a result of the 35s, but I expected that. I'd certainly come to one of your club meetings if invited. As soon as the restrictions lift, let me know. Thanks for the feedback on the video. Also, recalibrating for the correct tire size with the ProCal, will allow your speedometer to be accurate and your transmission to shift as per schedule. It doesn't actually change the shift points. Cheers.

@moirisman33 9 ай бұрын

Wow great video. After doing the installation and the pairing perfectly the second horn for the calibration didn't work...is the car settled know or is something wrong??

@CheaperJeeperTV 9 ай бұрын

I couldn’t say. I’d suggest contacting ProCal. Thanks for the feedback on the video. Cheers

@andrewglover1564 2 жыл бұрын

How do you program the tire pressure... This is a great video.

@CheaperJeeperTV 2 жыл бұрын

Hey Andrew, Here is the User Guide for the ProCal that illustrates how to do that and more: www.aev-conversions.com/wp-content/uploads/2020/02/JLJT_SNAP_Booklet.pdf Cheers Cheers.

@abnirvana996 Жыл бұрын

Great video. Quick question...can you leave the cable in place even if you are taking the Jeep in for authorized service. Will it interfere with anything they may be doing. I understand that the ProCal can be removed after the calibration is complete. Thanks

@CheaperJeeperTV Жыл бұрын

Hey abnirvana996, Thanks for the feedback on the video. I'm gad you enjoyed it. I believe that you can leave the cable in place. I leave mine in, but then I've done almost all the service to the Jeep myself. I am not sure how the wire back there would interfere with anything. Cheers

@Black-Atom Жыл бұрын

Hello. Great video! Made my install a snap. But I am wanting to go with a tazer mini, for a few features I now need. How do I go about resetting my Jeep and removing the pro cal snap?

@CheaperJeeperTV Жыл бұрын

I'm not sure...it might involve using a pic or pin tool to pry out the plugs, but I'm not sure. You might consider the JScan instead of a tazer mini though. Check out this video. kzfaq.info/get/bejne/ibupdqaVtJ67ZJ8.html

@Black-Atom Жыл бұрын

@@CheaperJeeperTV thanks for the swift response. I guess I’ll just go backwards for the uninstall. And I will check out the jscan for sure.

@Guitar101-kj9po Ай бұрын

Once you remove the ProCal after setting the tire size. Can you then change the equalizer to what you like for better music sound?

@CheaperJeeperTV Ай бұрын

Yes, Once you remove the ProCal, the radio controls only work on the radio.

@MAI-zl3li 2 жыл бұрын

any chance you know how to unplug the white plug that connects under the glovebox?

@CheaperJeeperTV 2 жыл бұрын

Hey MAI, I do not. It has something to do with sticking a pin in behind to release it, but I don't know specific instruction. Sorry.

@weebleslove469 2 жыл бұрын

How about the Tazer? With that you can do much more, without all the wiring. Only problem is cost of $300

@CheaperJeeperTV 2 жыл бұрын

Hey Tim, There is the JScan App as well. Given that the ProCal Snap was included, I just went with that. Cheers.

@erickdiaz6152 2 жыл бұрын

Did your MPG improve after re-calibrating the new tire size?

@CheaperJeeperTV 2 жыл бұрын

Hey Eric, I didn't compare the fuel efficiency before and after calibration. Sorry.

@jimsoucie9075 Жыл бұрын

I would add to make sure the vehicle is off when fishing the wires. If you short them together it will send your truck for a electrical ride.

@CheaperJeeperTV Жыл бұрын

Thanks

@valihelot 3 жыл бұрын

Hello! Thanks for the tutorial! After following all the steps, error 134 appeared on my board. so if I still bought it I would like to use it. any idea what I could do to use it?

@CheaperJeeperTV 3 жыл бұрын

I’d call AEV customer service. I’m sure they would know exactly what to do. Let us know how it turns out? Cheers.

@NormystheGuru Жыл бұрын

I got the same error 134 too while programming my ProCal Snap, but after contacting customer support, they walked me through the step to solve the problem. 1st step, make sure your radio is on AM. 2nd step turn off the Bluetooth connection to the Uconnect. I unpaired my phone while I was programming it and everything worked. Great customer support from AEV and great video!!! I have lots of your video tutorials saved in my Wrangler playlist!! Thanks!

@CheaperJeeperTV Жыл бұрын

Hey Normy, Thank you so much. I’m glad to hear you found some of my videos helpful. Feel free to share. 😝 Cheers

@johnsminth9891 2 жыл бұрын

Just one little thing that made me struggling a bit. Set the radio at AM/FM before any adjustment.

@CheaperJeeperTV 2 жыл бұрын

Ah. Ok. Thanks.

@eduardorosa7987 2 жыл бұрын

If wasn’t for this video , I still would be there trying to connect the thing 😖 Thank you Sr.

@CheaperJeeperTV 2 жыл бұрын

Hey Edwardo, I'm glad to hear you found the video helpful. Cheers.

@kurtnulf3362 3 жыл бұрын

Thats a lot of steps to go through I was waiting for you to say on a full moon at midnight with a owl hooting three times on Halloween to get this thing to work right or a least to sacrifice a chicken to Baal

@CheaperJeeperTV 3 жыл бұрын

You're funny. For sure the JScan would have done the trick. But since the ProCal came with the lift, I thought I'd use it, and do this instructional video, as KZfaq didn't have many detailed examples.

@kennethdecarlo8088 7 ай бұрын

How do you remove it after your finished?

@CheaperJeeperTV 7 ай бұрын

It just pulls out of the OBD port.

@cuen_recon6662 2 жыл бұрын

why its better than the tazeR?

@CheaperJeeperTV 2 жыл бұрын

Hey Rogelio, I'm not sure which would be considered better, It's just that the ProCal SNAP is what came with the lift. Cheers.

@firegreg158 3 жыл бұрын

Man, you posted this video about 3 months too late . I went through all the same headaches you did.

@CheaperJeeperTV 3 жыл бұрын

Hey Barbells and BBQ, Sorry about that. Maybe my timing will be better in some of my other videos. ;-) Cheers.

@firegreg158 3 жыл бұрын

@@CheaperJeeperTV No worries. But a suggestion that I might add(possibly for your viewer suggested tips and tricks), after calibrating with the procal it's a great idea to verify the accuracy of speedometer reading. I had to make several changes to dial my true 35" ko2s. I'm running about 37psi per my chalk test and I had to calibrate my procal to about 33 and some change. I used the GPS in my phone to verify my speed between changes. Also I found in the forums that you have to make larger than .2" to have the procal recognize the changes. Thanks for the video and your time.

@TrailWalkerCB 3 жыл бұрын

Great video explaining how to use it. I took a much easier approach and purchased this AEV Procal Module from NorthRidge (www.northridge4x4.ca/part/programmers-tuners/30406007ag-aev-procal-module), you simply just PIN out the change you want to make on the module itself, plug it in, turn your ignition on, your horn will beep for confirmation, and then you turn it off. I know it works for the JK, not sure about the JL though.

@CheaperJeeperTV 3 жыл бұрын

Hey TrailWalker, I believe your unit for the JK is JK specific, as the ProCal I have is for the JL as it interfaces with the uConnect Infotainment System. Thanks for the info. Cheers.

@TrailWalkerCB 3 жыл бұрын

@@CheaperJeeperTV Yep, Mine is made for the JK, but if there was one like that for the JL, it would make it pretty easy, no wiring required, just plug and play.