New Blade and First Bomb Shrapnel - Old Sawmill Repair #7

No video

New Blade and First Bomb Shrapnel - Old Sawmill Repair #7

Рет қаралды 3,638,298

Күн бұрын

I got the new blade for this old sawmill repair project Laimet 100 and it cuts finally! In this video, I put in a brand new blade and made some cuts. I got the bomb shrapnel in the first log, but it didn't do anything to the blade teeth, so I was lucky.
I started an old sawmill repair. It's a mobile sawmill that has been junked. It has a bent frame in several spots, the axle is cut off, the drawbar missing, lots of rust, and so on...
👍Thanks for watching and please don't forget to SUBSCRIBE!
👉Special thanks to my PATREON fans! MY PATREON page:
/ afhprojects
@Donn DIY
@Tar
#sawmill #sawmilling #oldsawmill #afhprojects
👉SUBSCRIBE LINK:
/ @afhprojects
👉MY CHANNEL LINK:
/ @afhprojects
~-~~-~~~-~~-~
Please watch: "BIG Beaver Dam Removal With Excavator"
• Huge Beaver Dam Taken ...
~-~~-~~~-~~-~

Пікірлер: 403

@kelinciungu 18 күн бұрын

Fantastic! This video showed me the incredible process of sawmilling. It's fascinating to watch the entire sawmilling process. The video quality is superb. I'm excited for your next video. Keep up the fantastic work!

@AFHProjects 17 күн бұрын

Thank you! I appreciate it 🙏 Cheers!

@dailrharris9009 Жыл бұрын

sawing for 55 yrs here mm it's always the new blade that finds metal, always

@AFHProjects Жыл бұрын

Yeah, Murphys law.

@82lube Жыл бұрын

Love watching these old saws. I grew up manufacturing & repairing saws up 144" in South Georgia for almost 35 years

@AFHProjects Жыл бұрын

Thanks! Wow, that is a lot of years. You must be know everything about these. These types of sawmills aswell?

@romppaukko Жыл бұрын

This sawmill is not even old. About only 50 yo. 70's or 80's model.

@geraldsundberg3610 Жыл бұрын

I'm glad you're just sawing for yourself as that mill is not for production!

@AFHProjects Жыл бұрын

Yeah, may be small scale production, like for neighbors and locals.

@wilmamcdermott3065 Жыл бұрын

Diffrent kind of saw mill for sure.

@AFHProjects Жыл бұрын

Common here.

@wilmamcdermott3065 Жыл бұрын

Yea we use to run a carrige head saw Type log dogs used on all smaller trees . blade had strong backs so would toss loose wood

@adamkrolikowski892 6 күн бұрын

O ciekawe😊😊 mam podobne tr skromni😮..😊

@user-po2fx1cc4h 9 ай бұрын

It’s also good that the splinter didn’t “fly”. Once upon a time my father and I were sawing up a pine tree; in that pine tree there was a splinter from that war. The saw caught a splinter and it flew towards his father. After this incident, I bought a metal detector and before cutting logs I always scan them for the presence of metal.

@AFHProjects 9 ай бұрын

Yeah, I bought it as well. Thanks for watching!

@SuryoAsri 7 ай бұрын

Setingan yg bagus menghasilkan kayu yang rata dan lurus Salam sukses

@TheOldManAndTheSaw 2 жыл бұрын

Good video. The quickest way to find metal in a log is to install a new blade.

@AFHProjects 2 жыл бұрын

That's right 😄

@slhasebroock 2 жыл бұрын

Great job! Really enjoyed the sawmill restore series!!! Hope to see more of the mill Thank you!

@AFHProjects 2 жыл бұрын

Glad you like it! Thanks 👍

@user-th9ws1od3i Жыл бұрын

@@AFHProjects ,

@ginaschmeisser7537 Жыл бұрын

@@user-th9ws1od3i😅) P L PlLLLLL0

@jasonbabila6006 2 жыл бұрын

I highly recommend getting a metal detector wand to look for any metal embedded in the logs before milling, large production lumber mills does it before milling all logs.

@AFHProjects 2 жыл бұрын

I will do that. There is no other option. We have this stuff a lott in trees.

@mbahdjari8063 Жыл бұрын

@tomboyqueenX 2 жыл бұрын

Don't you just love the know-it-alls who are just dying to critique you, someone, anyone?

@eightapeach2861 7 ай бұрын

I was about to write the same thing. Everybody in the comment section is an “expert”. You should’a done this or that. My opinion is, that’s a fine old mill! Thanks for posting

@AFHProjects 7 ай бұрын

@eightapeach2861 Thanks for watching and commenting! Cheers!

@lewiemcneely9143 2 жыл бұрын

Glad everything turned out all right with the metal and using the detector will prove itself worthy. Now to get the oil can and lube everything up. The millers here just use used oil so nothing wasted. Good lumber too! God bless!

@AFHProjects 2 жыл бұрын

Thank you!

@juris.m 2 жыл бұрын

@@AFHProjects how much did such a saw cost you

@AFHProjects 2 жыл бұрын

I don't know. We had this laying around a years. In this condition I think around 2k or less maybe 🤔

@chrisedgington1603 Жыл бұрын

@johnc5874 2 жыл бұрын

I have an old circular blade mill that you can take a tool that unlocks each individual tooth so you can replace them, which was great for times like that. Sure hop you're going to build a roof over that "babydoll".

@AFHProjects 2 жыл бұрын

Yeah, I have never seen these blades here in Estonia. I'm not sure about the roof, but have to cover it somehow if not using it.

@mike-dq6wo6dg9o 9 ай бұрын

Your the first one i have seen to wear gloves when picking up the blade, good work 👍

@robertmclean9737 Жыл бұрын

My Dad Made Knifes out of Old Blades, they were top Quality. Really Held a Edge.

@user-oo5qd6ns8c Жыл бұрын

Это Н её лезвие, а дисковая пила, , пишут не понятно, что

@uncletacosupreme7023 Жыл бұрын

"I got dat zero clearance though." Thats a bad machine sir! Glad to see you are taking care of it.

@AFHProjects Жыл бұрын

Why's that bad?

@aldomottino850 2 жыл бұрын

Nice upgrade! It seems to be working perfectly! Enjoy!

@Timothy-lb2vr Жыл бұрын

Im sure there is less than a 10% chance of that blade flying off, but I like watching the video more than standing directly in that monsters line of fire.

@mriwayanofficial69 Жыл бұрын

The old machine ,but still good🙏🏼👌👍

@82lube Жыл бұрын

I worked with TRIAGLE T CORPERATION for 18 years. We designed & patented the replaceable CARBIDE SPRING TOOTH sawblades. By 1989 appx 90% of the blades we made had been changed to INSERT BLADES & single carbide teeth can be changed out when damaged by shrapnel imbeded in wood. Blade over 4' are VERY TEMPERMENTAL & have to be releveled with hammer, anvils & English wheels to keep their FLEX/BREAK POINT PRESICE..

@AFHProjects Жыл бұрын

Nice! Yeah I let them hammered and maintenanced in shop. Thanks for the comment!

@eustaquiopereira4267 2 жыл бұрын

Maquinário bastante eficiente e simples. Congrats !

@user-wh9od4sb2m 2 жыл бұрын

Да, и безопасная👍

@michaeld53 Жыл бұрын

I’d recommend removing the blade protection AFTER its installed on the shaft. Less chance of injury or damage to the teeth!

@AFHProjects Жыл бұрын

Right!

@SuperReznative Жыл бұрын

Agreed,as,an observer ,but I can see myself ,so "involved "in things that I would overlook ..

@patriciodejesuspatimorales4605 Жыл бұрын

god job

@rajdhar327 Жыл бұрын

Good restoration with operationalisation. Great job bro.

@AFHProjects Жыл бұрын

Thanks 👍

@davidelliott5843 2 жыл бұрын

All that bare metal could benefit from a good soak in chainsaw bar oil. Thin it with paint thinners and spray it on. It gels quite quickly and really keeps the weather out.

@janjovergar1921 2 жыл бұрын

No deberia alinear con una pletina es mas sertero

@nickyandareta4329 18 күн бұрын

Fantastic! I was truly fascinated by the sawmilling process shown here. The way you handle those giant logs is impressive. The clarity and detail in this video are top-notch. I'm eagerly waiting for your next video. Keep sharing these amazing videos!

@AFHProjects 18 күн бұрын

Thank you!

@alaskanfrogman 5 ай бұрын

I look at this video and can't help but wish I could get my hands on that old blade...

@hyloward-gh6vj Жыл бұрын

I really like what I see 😊

@sighardrichter888 Жыл бұрын

Höllenmaschine...

@gregcaspari5893 Жыл бұрын

Obviously because he knows being a woodworker it doesn't need to be pretty it just needs to work

@beakittelscherz5419 Жыл бұрын

So wie ich lauf So geh ich auf. 😎

@discoverykai1547 Жыл бұрын

Great job.I am impressed with the machine and how he works. It looks very efficient. Thank you for bringing this video to me.

@AFHProjects Жыл бұрын

Thanks for watching!

@WoodworkingTop535 2 ай бұрын

Really big machine

@pilowtop7077 2 жыл бұрын

Que lindo el tañir del acero,cuando puso la sierra...

@RobertWilliams-mk8pl Жыл бұрын

Oil,oil please oil. Like Bill Carson asking for water. I can hear the saw crying for it

@batscher61 2 жыл бұрын

Ja super . neues Sägeblatt drauf und scheiße im Holz und Sägeblatt im Eimer . Stumpf . das Kenne ich auch in unserer Schreinerei . wir haben Vidis bestückte Sägeblätter und die sind richtig Teuer . wenn da son Bombensplitter im Holz ist , Wars das mit dem Sägeblatt.

@johngrace199 Жыл бұрын

Excellent work, you did a great job of bringing back something beat up, twisted, and rusty into full operations. Look forward to see what's next

@AFHProjects Жыл бұрын

Thanks, John for a good word!

@ishure8849 2 жыл бұрын

G'day AFH, I like your articulated log loader I did some milling for a company once they had a Lemat mill they couldn't get it to run true they had to finish a semi load of roof batons for an order so they hired me and another bloke with 10/30 Lucas mills and we finished the job in two days 👍

@Niemals_Anal-lena Жыл бұрын

gut, daß er immer mit der Hand schiebt, sonst würde die Maschine das nicht schaffen.

@ganesatono5990 22 күн бұрын

Wow amazing, hadir

@tom-5792 5 ай бұрын

Worked on a mill like that back in 1973. All the teeth on the blade were removable.

@AFHProjects 5 ай бұрын

Yeah, these are not common in here. These teeths are changeable as well but in the shop. Thanks for watching and commenting!

@ayroyilalt 4 ай бұрын

Можно самому напоять. Медь, бура и горелка. Делов то!@@AFHProjects

@alltechamazing3536 Жыл бұрын

Nice..Amazing

@kereatifkaryaimajinasimesin Жыл бұрын

Waw good job xtreme👍👍👍

@AFHProjects Жыл бұрын

Thanks 👍

@woodlandwrench Жыл бұрын

Pro tip: leave the tooth protector on the blade when installing incase you knock it. Pull it off after.

@rayadams1312 Жыл бұрын

Good God man it looks like your still living in the 70s

@AFHProjects Жыл бұрын

Only machine in this video is the Valmet 872 forwarder made 76', other equipment is mutch newer.

@mrmayfield5958 Жыл бұрын

They still exist, the good things. This machine doesn't need to be smart. No internet required.

@AFHProjects Жыл бұрын

Yeah 😂 just two wires and the motor.

@ManhDoWoodShop 4 ай бұрын

Good video

@AFHProjects 4 ай бұрын

Thanks!

@RussMartin-us4mw 6 ай бұрын

We used to spray them down with diesel, it works great as rust prevention, thats just surface rust.

@AFHProjects 6 ай бұрын

Yeah, that works.

@user-wb3lb5bf6t Жыл бұрын

Это обыкновенная шпалорезка с приводом от ВОМ трактора.В России много таких было ,но с направляющими рельсами и кареткой.

@Sinarglondong Жыл бұрын

Sangat bagus

@garengtutorial8923 Жыл бұрын

Wow mantap bro 👍

@chrishoos9755 2 жыл бұрын

The purchase of a metal detection wand would be useful in the future my friend. Great video's and skill. Greetings from Canada.

@AFHProjects 2 жыл бұрын

Thanks Chris! Detector will come for sure. We have lots of metal inside the trees here from the war.

@manuelaureliolagosespinoza5102 2 жыл бұрын

@@AFHProjects 1111111

@1425race 2 жыл бұрын

Great to see that new blade working well but it's a pity that everything around it is rusty. Your next purchase should be a 5kg can of good grease and a grease gun. Put grease on and in everything that turns and moves especially pump grease into any grease nipples on all bearing housings if they have them. If any housings don't have grease nipples - install them. Dry bearings will become noisy and wear out quickly. Use your grease gun every day before you start the mill. Your nice shiny new blade needs a coat of paste wax to keep it from rusting and to make it cut easier.

@scania1982 2 жыл бұрын

He has lubricated everything in an older video

@davidelliott5843 2 жыл бұрын

Bearing bushes and small angle ball bearings need to be fully greased. But over-greasing rotating ball bearings is a great way to overheat and seize them.

@sieglindegotzfried6692 2 жыл бұрын

Super die läuft ja wie eine neue

@fricknjeep 2 жыл бұрын

hi there nice up grade looks good john

@AFHProjects 2 жыл бұрын

Thanks 👍

@lucianoquadarella8 2 жыл бұрын

Good job 👏👏👏

@baanhmaybachvlog7405 2 жыл бұрын

Ba anh maybach vlog Chào bạn....

@kangkasbun1624 2 жыл бұрын

Good👍🏻👍🏻💪🏻

@sotm2 2 жыл бұрын

Man I'd spray down all those bolts and nuts with some oil!! That whole lill is in bad need of some oiling and greasing.

@user-Colhchim Жыл бұрын

О,и у нас в поселке в леспромхозе была подобная машина. Только диск на ней бы диаметром в 3 метра. А оператор сидел в будке обитой внутри мягким волоком в 5 см. Ее редко пускали, только тогда когда наберётся достаточно бревен диаметром от 1.0м и до 1,8м. Вот она гудела за километр ее было слышно. А раз диск сокочил и уехал за километр от станка. Правда там было немного под горку,но все заборы,с десяток,повалило и один сортир на двое раскроило. Но все живы и целы остались. На этом ее работа и закончилась. Да и так же вот как то на ставной/наборной пилораме дуб пилили и в нем кусок от снаряда(военный лес) и три пилы,новеньких дрык и зубьев как небывало.

@tubetuomo 2 жыл бұрын

Metallin paljastimella on hyvä käydä rungot läpi ennen sahausta

@friedhelm1615 Жыл бұрын

Mächtig gewaltig, Egon... 😊

@duna6158 Жыл бұрын

Крутая вещь!👍

@user-cv4eo3ue2x 4 ай бұрын

100 ЛЕТ НАЗАД

@woodhunter2580 Жыл бұрын

Hallo brother salam kenal dari saya di Aceh

@martinscopes3914 3 ай бұрын

I see the other review yer you need a hand held metal detector. Very nice saw I love these old saws.

@AFHProjects 3 ай бұрын

I have that. I also have videos out here where I find metal in logs. Thank you! Cheers!

@swanie_6448 2 жыл бұрын

You have heard of grease and oil... Right...?? A well oiled and maintained machine prevents jams and lives.... especially with a blade that big

@AFHProjects 2 жыл бұрын

It is greased. The frame is just rusty.

@thedolphin5428 6 ай бұрын

Just a little point. When adjustjng the knife alignment at 3:00, you correctly used the straightedge along the blade and the knife's foot, but not along the blade to the knife's tip. A bit of a push and bend as you did is not the best way. Shimming under one side of the foot into best alignment is the better way.

@AFHProjects 6 ай бұрын

You have right! I just tried to align the blade with a log sled, but it's more accurate when align without the blade, just use the collar. Thanks for watching and commenting! Cheers!

@Mahyarudinyardi141 Жыл бұрын

Amin semoga bermanfaat bagi semuanya semoga berjalan dengan lancar

@AFHProjects Жыл бұрын

If you have running sawmill in your countryside then you have a lot of friends. 😁

@vasiliymoraru851 Жыл бұрын

Оочень затратная лесопилка! Я видел, ребята пилили вековой дуб одной бензопилой!

@AFHProjects Жыл бұрын

I saw a guys who sawing these old oaks with handsaw.

@user-ft4zk1jc1n 19 күн бұрын

А Я виде как из болота тащили в ручную бегемота...

@joseluizvidal6097 2 жыл бұрын

Boa noite!!!!!! Muito bom mesmo, o trabalho dá serra. Macaé RJ.

@jannitert6576 Жыл бұрын

Next step, I believe 23:42

@chrisbailey459 2 жыл бұрын

Great job of lubricating the machine before operation?

@Gospelsingles2000 2 жыл бұрын

17:38 Immer die gerade Seite an die Führungsrollen !! War klar, dass das Blatt verkantet !!

@Московский_Колхозник 4 ай бұрын

Почему-то мне кажется, что даже самодельная ленточная будет в разы дешевле и эффективнее

@CSWmanofsteel Жыл бұрын

Any more videos of you running sawmill? GREAT videos restoring your mill👍🏼

@AFHProjects Жыл бұрын

Yes, you can find more. I have separate playlist for this sawmill

@CSWmanofsteel Жыл бұрын

@@AFHProjects great thank you 🙏🏼

@AFHProjects Жыл бұрын

Thank you for visiting! Cheers!

@arthurn9237 2 жыл бұрын

ADD OIL EVEN THE OLD DRAIN OIL FROM THE TRACTORS MIXED WITH A LIL BIT OF DIESEL PAINT IT ON LET IT SOAK IN DON'T B (SCARED)

@arzya13 2 жыл бұрын

Хороший станок! Интересно. Каска спасет, если диск разлетится? 🤔

@user-bb3gw7zx5e 2 жыл бұрын

Хоть какой-то шанс

@AFHProjects 2 жыл бұрын

Почему он должен ломаться?

@arzya13 2 жыл бұрын

@@AFHProjects у знакомого есть пилорама дисковая. Как-то внутри дерева попался костыль железнодорожный(????). Бешеные обороты. Диск в осколки. Ранил знакомого в руку и ногу. У друга пилорама ленточная. Гвоздь кованый в дереве. Лента рвется, чудом не задев оператора

@philslaton7302 Жыл бұрын

Most dangerous sawmill I've ever seen in operation.

@DillonHFM 2 жыл бұрын

That is a great sawmill! I have never seen one like it in person, the pto power is a great way to go

@AFHProjects 2 жыл бұрын

It's old and rusty but I hope it works. I have no time to mill the logs yet, so much jobs with the excavator. But soon I hope.

@DillonHFM 2 жыл бұрын

@@AFHProjects I have the same problem, My old mill needs a lot of work, and It has been hard to get it done with everything else going on, never mind getting the footage edited and up on youtube

@aleksandryakyshev Жыл бұрын

@@AFHProjects г

@brianshields7137 2 жыл бұрын

Your saw blade has a cup in it itwill spin straight only when it gets to designed speed the rating knife/splitter ans saw guide should only be adjusted to allow for the cupping

@AFHProjects 2 жыл бұрын

Yes, you have right. I know that but I did it still wrong way. :D Thanks for pointing it out. I will do that again without the blade.

@ossisalminen1928 2 жыл бұрын

No ei onneks menny hyvä puu pilalle.

@Korkkiproduction 2 жыл бұрын

kauheesti tulloo pintoja 😂

@Kaaransaha 2 жыл бұрын

Meni se siinä mielessä vähän huonosti, että tuli sivuvääriä lankkuja. Olisi pitänyt ottaa pelkka keskeltä. Ensin pinta pois, sitten 2" paksu sivusta, sitten 5 tai 6" pelkka.

@ossisalminen1928 2 жыл бұрын

@@Kaaransaha Tätä tarkoitinkin ,mutta tuo puu oli kuivanen ja halkeillut ettei siitä kunnollista tavaraa olisi tullut. Eli puu meni pilalle muttei ollut onneksi hyvä.

@Dan-ud8ob 2 жыл бұрын

That's a very unusual mill.. doesn't look safe to me ..

@AFHProjects 2 жыл бұрын

I haven't seen a safe mill. ut why are other mills safer than this?

@user-kc2gm8fk5o Жыл бұрын

Надо делать очень чувствительны металлоискатель,и обследовать каждое бревно!

@graemefrost5861 Жыл бұрын

Life and adjustment would be a lot easier with a wire brush to clean the threads and a little grease on the threads and nuts?

@daleolson3506 Жыл бұрын

But I’ve always done it the hard way.

@graemefrost5861 Жыл бұрын

If you always do what you always did, you'll always get what you always got.

@destroywoodusa 4 ай бұрын

This video had more twists than the wood on your sawmill

@XLR8RRICK 2 жыл бұрын

Good to see you working on the mill. I think I hear a noisy bearing and I see the carriage not traveling smoothly like some roller is a bit higher than the rest. Looks like you could use an Indexing Pin to set 2" and one at 4" at the far right so you could just push the log once to the pin and save a lot of time. Be well.

@AFHProjects 2 жыл бұрын

Thanks! I mill different material. I just line up with the carriage ribs.

@sotm2 2 жыл бұрын

I hear and see a bunch of things needing oil or grease!!

@AFHProjects 2 жыл бұрын

@@sotm2 It's greased. Just some rusty polts and nuts.

@user-do7xn7bn8s Жыл бұрын

Машина очень не экономная.

@SeattlePioneer Жыл бұрын

This operation is a marvel of efficiency compared to using a pit saw to cut lumber. And a modern sawmill is a marvel of efficiency compared to this operation.....

@mikelskelley 2 жыл бұрын

Can a Gide or stop be fitted to the cut side so when you push the log too it will stop for you and then you will not need to adjust the back end of the log each time, good to see it al working for you, like all old things it will always need to be tinkered with ( worked on)

@AFHProjects 2 жыл бұрын

Thank you! The spot is variable in location. It depends what is the cut with. I line up the cut with the carriage ribs. Just testing, but if real cuting will begin then I need at least 2 more men.

@mikewilliams2072 Жыл бұрын

I think the carriage has little raised stops built in you just have to push the log against them

@user-vk7ze7kl7l Жыл бұрын

У нас по другому была подача бревна, стояла каретка с бревном ходила по рельсам.

@eisbeinGermany Жыл бұрын

That's why never cut wood without first checking the log with a metal detector

@vicentefernandez3930 Жыл бұрын

¿No debería apretar la tuerca del disco en el mismo sentido del giro?

@AFHProjects Жыл бұрын

No, giraría solo mientras se corta. La tuerca debe apretarse contra la dirección de rotación del disco.

@MrNoncredo 2 жыл бұрын

you should think about fitting a cooling system for the blade. good job

@AFHProjects 2 жыл бұрын

A bottle with hole in cap? 😜

@daveyhofer7926 2 жыл бұрын

Looks like a death 💀trap to me.

@ApinexCom Жыл бұрын

Great Video. Have you ever used a green line laser module to align the cut ?

@AFHProjects Жыл бұрын

No, I haven't

@ApinexCom Жыл бұрын

That’s actually our specialty. Most of our clients in the sawmill industry that operate the woodland mill or wood mizer use our green line laser module AGLL2 in a 20mw output power.@@AFHProjects

@zarkocavlovic2177 2 жыл бұрын

Goot se 👍🥂❤

@jan-erikwahlberg2791 Жыл бұрын

isoisäni oli saha-asettaja Kotkassa sotien aikana ja niiden jälkeen.

@arseniovera672 Жыл бұрын

Excelente trabajo!!!! ¿¿ no hay posibilidad de dotarles con un motor eléctrico????? Consume poco y más practico. 👍👍👍👍👍

@AFHProjects Жыл бұрын

¡Gracias! Todavía es posible. Pero no tenemos una corriente tan fuerte y conducirlos con un motor diesel es relativamente económico. Además, este barco de sierra se puede utilizar como móvil.

@arseniovera672 Жыл бұрын

@@AFHProjects excelente respuesta. Muy complacidos y saludos desde las tierra de las cataratas arg .🇦🇷🇦🇷🇦🇷

@danhunik7949 7 ай бұрын

Judging buy the look of those saw teeth you have carbide bit soldered onto the saw. Have you considered bit and shank. Even though the kerf is wider you can change damaged teeth in a matter of a few minutes and be cutting again. Carbide requires diamond wheels. Bit and shank can be sharpened with a regular grinder stone.

@AFHProjects 7 ай бұрын

That's right. I have 4 blades, and I take them to shop for maintenance. Thanks for watching! Cheers!