Nice. One extra thing I did afterwards is unplug the o2 sensor to untwist it. Check my 2nd vid.

@Glenn3000 Thanks If u didn't buy the exhaust yet and near NYC, let me know. Traded in my bike and took it off. Sitting in box with other ninja 650 parts & Accessories.

It's real loud so it may bother some people. I listen to music with earbuds but now I have to increase the volume to max. For a long trip (over 2000 miles) in the spring, I may use the original exhaust.

Yeah I should have... Got really bad gas mileage. Removed it and traded in for a Yamaha MT-07. Checkout the drop-off and pickup vid on my channel...

@IOverdoneCrownI I'm in the USA so we only have one sensor. I think Europe and some other countries have 2 sensors for environmental control. Try it with just one sensor. Maybe you get an engine light. Also, if you have issue with engine not starting or cutting out, then increase the "idle speed" with control on bottom right of bike.

Ok thx i Will see

Sounds awesome. It's loud enough for me with baffle. My neighbor thought I got a new bike... Torque should be 13 ft lb for header but I didn't bother since that's basically hand tight. Couple of things... Carbon fiber tip on mine turned black so asked seller and got an all metal muffler. Also, I put some heat shield (a.co/d/9LYxzZu) on the inside of bottom left fairing (black part). Update review video coming soon.

Thank you. It's a Kawasaki oem part. Got it on ebay. One of first mods I did and I highly recommend it. Other after market ones are similarly priced so rather just go oem. kzfaq.info/get/bejne/eaqJZMiTt5uUqHk.htmlsi=lMUHVpeof9rh2JhY That tail bag in vid is really cheap. Aliexpress or temu has them for like $15. I have other tail bags that I put on the rack and I can fit another tail bag on the back seat. I'm planning on going on a long trip and will try to make a vid of touring setup I'll use.

@@genxjya awesome dude thanks. I’ll be sure to sub up. As soon as I sent that message I thought “well he probably made an install video for it” and you did lol. Definitely going to invest. I do a lot of touring on mine and that is something I definitely need. A big backpack isn’t much fun tbh. And I think it looks good. Thank you for the recommendation and response.

If you check many reviews on Yoshimura for this bike. Some say it's a little too quiet. This thing is loud.

It was just too expensive. Anyway I got an MT-07 now so may get Akrapovic for it.

@Band222 Probably not a good idea. The o2 sensor may go crazy. Also, the muffler and cat converter are one piece. Once u cut that off the pipe is just gonna hang on bottom of bike.

@Band222 I had to take off the aftermarket exhaust when I traded in the ninja 650. I'm in the NY/NJ area if u want to get it cheap from me. I'll also include bunch of left over parts for Ninja 650...

@@genxjya ohh ok thanks u got a link for the exhaust in this video?

@@Band222 It's in the description. www.ebay.com/itm/175881757293?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=jbdlh7pqrkg&sssrc=4429486&ssuid=IhUZRFMFQkm&var&widget_ver=artemis&media=COPY

This exhaust is only for US version with 1 O2 sensor. If you already bought it then maybe you can plug the 2nd slot with plug screw that came with exhaust?

@genxjya it's not that a slot remaining. It's the second sensor (and the wires) that are left hanging, and I'm nervous if it will appear the check engine

@@TapHelmet Just unplug the 2nd sensor and see what happens.

That's the same reason I was worried. If you see 5:07 of my vid. The new exhaust almost touches that plastic piece. There are actually groove shapes on the inside of that piece for an exhaust but it is still very close. Recently I purchased a heat shield, cut it to shape and stuck them on inside of those inner pieces on both sides. Also, the carbon fiber on tip of muffler just turned black. So the seller is sending me a different one without carbon fiber on tip. I am planning a update review/ride video whenever the weather breaks. FLASLD Aluminized Heat Shield Thermal Barrier Adhesive Backed Heat Blanket (12'' X 12'') a.co/d/hUFOSY7

yeah i seen that, i was just wondering if you have put anytime on the bike with the exhaust yet if you noticed it melting being so close @@genxjya

@gagerhodes9495 I did about 3 rides and still okay but just get the heat shield since it's so cheap.

So bad news I just got mine this morning came in and installed it I did have to cut an inner fairing I have a 2023 krt abs 650 pipes did not go any closer together but all in all sounds good so far

@gagerhodes9495 u got it from the same link I got it? Just gotta loosely tighten on header then work on getting right position.

I traded in for mt07 about 2 weeks ago. Got lots of extra parts if u r near nyc.

No. DB Killer/baffle is still there. Never took it out.

I'm in the USA so only one.

@@genxjya thx for that, not for mine so, have fun with this beauty!

Only had it for only 2 days. All I can tell you is... I ain't spending $800-$900 on any upgrade for a $8k-$9k bike. Took it for a ride and I love it so far...

@@genxjya you're probably right, I would have invested $800 if it was a 1000cc bike, but for the exhaust on this bike I think it will be good

@skiff5036 I mean if you really want the yoshi then get it. If you have a cyclegear.com acct then create a new acct with a different email. Then u can use thier 15% discount code. Otherwise you can get this after market one then use the rest of money for other gear. Check out fc moto (german website) for riding gear. No tax for items shipped to usa and they got good prices for brand names.

Ya I think so. I removed it because I got really bad gas mileage. I think there were some leaks. Should have put some sealer where the pipes meet. Probably a tune may help but didn't want to flash ecu. Also, it would defeat the purpose of getting a cheap exhaust if I have to pay as much for a tune. I traded in the bike for a MT-07. Checkout the vid on my channel.

For the Ninja 650, you need to replace the whole exhaust.

None so far. Bike running good. Waiting for better weather to make review/riding video. If you get this, don't get the one with carbon fiber on tip. Mine turned black. Get the one which is all black, all metal, or carbon fiber with metal tip.

It looks good without any decals anyway...

@@genxjya lol it really does. Good job. And keep up the content. I have the same bike. ECU flash,with the mivv carbon full exhaust

If Kawasaki setup the bike as "lean" then maybe that's the way it's supposed to be? From youtube videos I've seen, an aftermarket exhaust actually makes the bike run richer. On a computer you may see differences but a person wouldn't be able to notice anything different performance wise in real riding conditions. This bike is like a Honda not a Ferrari. They put these exhausts on far more expensive/finicky bikes with no tune and they have no issues. Only time will tell. I'll do an update video soon.