Agrowtek manufactures high quality control systems and electronics for all types of applications including commercial agriculture, industrial and OEM applications. www.agrowtek.com
Пікірлер: 76
@zythosx40673 жыл бұрын
Finally understood the actual process of wave soldering, thanks! Also like the bubbly music in the background, gives a light atmosphere
@SkeleCrafteronYTАй бұрын
This is Cave Johnson, welcome to Aperture Science Laboratories
@bennymario58768 ай бұрын
The precision and math that went into this is cool
@Gurnavemerno2 жыл бұрын
Strangely relaxing with the music
@JohnDoe-qx3zs7 жыл бұрын
Could the preheating be combined with the reflow heating for the SMD components? (Of cause some THT components can't handle that thermally, so the two step soldering is still needed for boards with such components.
@user-cf9zp7pj7d7 жыл бұрын
Hello I have exactly the same model with the engine for soldering electronic boards like in this video .i need to give me some information about the temperatures in degrees Celsius, which is suitable for gluing of printed circuits in each stage of production because I have some problems with stains from sticking onto the printed at the end of the process. what is the suitably temperature for the solder and which must be the suitably temperature for the preheating stage . Thanks a lot from Greece.
@LovemeAquarius6 жыл бұрын
@ Agrowtek Inc. Which material is used for those small holding plates of the PCB ?. It seems they are not getting Tin plated on them 1:30 while only the PCB solder joints get it.
@sterlingstrand14322 жыл бұрын
I do jewelry soldering. My first thought was titanium, because solder wont stick to that material.
@amroasaad96262 жыл бұрын
what is the type of the pump that used on this machine to make a laminar flow
@JohnOcallaghan-mb4jt3 ай бұрын
They make so easy I this for years there little more to it
@samuelgonzalez29242 ай бұрын
I see those who recycle boards for the gold and silver I wonder if there is a machine similar to this but in reverse so it can be easy to remove all the pieces
@casinatorzcraftАй бұрын
oven
@overshootchannel Жыл бұрын
May I use part of this video in another KZfaq video?
@lilianagenchi6002 жыл бұрын
Buenas tardes, disculpa que podría hacer para que mis tarjetas pcb no sigan saliendo con cortos?
@lilianagenchi6002 жыл бұрын
La máquina de soldadura es una seho libre de plomo
@praburamasamy63743 жыл бұрын
This wave soldering machine use LED MCPCB soldering possible???
@erdemovski.Ай бұрын
Now i want to drink it😅
@HuyNguyen-fd4yi3 жыл бұрын
Very impressive. What is the material of holders like the teeth of your tool?
@1pcfred3 жыл бұрын
Probably stainless steel. They're called fingers. I worked at a place that had a wave solder machine. Ours was different from the one here. Our fingers were right on the belts. We didn't have that carrier thing. We ran boards continuously. One after the other all day long. Boss man liked production.
@ee-mon-ee16533 жыл бұрын
Yeah same my boss was a slave driver...So it kinda works like this and I will post a link...Start with a board it gets solder paste this is for any parts that sit on top of the board rather then have leads and go through it..That goes through a reflow oven which heats up said board and the paste soldering the parts to the board..Then it goes to SMT which is a bunch of machines that take parts off reels and place those parts the ones that go through the board onto said board..Then for us it went to VISION which is a machine that visually inspects all those parts from SMT are placed correctly...Then it goes to this here the wave some parts don't take heat well so sometimes a foam is sprayed on them on the board to keep from ruining that part when it goes through the wave...Then once through the wave you have FINALS where ppl in chairs inspect,clip leads and solder any parts the wave missed..Sometimes after all that the boards get CONFORMAL COATING which is just a most the time see through once in a while just a dark black coating over the board to keep any moisture out of the board because it may be outside or in a moist area...Then we test the board make sure it works well b4 it gets coated and it's off to shipping... kzfaq.info/get/bejne/mcB_mJeHqa7SaI0.html
@1pcfred3 жыл бұрын
@@ee-mon-ee1653 For us clippy leads was separate from QC. I used to race this Chinese girl that we called Ming the merciless. See who could clip more boards. She hated to lose. Her name really was Ming too.
@ee-mon-ee16533 жыл бұрын
@@1pcfred lol yeah we had a couple ppl who were fast as mofo at different things we also had a Asian girl who was really fast at applique and building different security boxes I don't remember her name...We did a ton of work for ADT and ISTAR like motion detectors and commercial security systems and we even made the circuit boards for blinker switches...By QC I assume you mean quality control which is exactly what it is the company I worked for just called it finals..Alternative Manufacturing Winthrop maine..
@ee-mon-ee16533 жыл бұрын
This here is the system's which we mainly built the top board we called 68's and the bottoms were 101's if memory serves me we did a lot of the RM type boards RM-K and about 30 variations...Kinda liked that job problem was they wanted to work you like a dog and pay you the same...So I left www.sourcesecurity.com/img/products/400/C-CUREiSTAR_400.jpg
@PauloConstantino1678 жыл бұрын
How does the solder go up the joint? It gets to the joint which is at the same level as the PCB but doesnt get to the PCB. How come? Does it travel up the pins?
@agrowtekinc.46768 жыл бұрын
Yes, the solder wicks up the pins and holes with proper application of flux and pre-heating in the same way as hand soldering.
@solderkingtv63534 жыл бұрын
Yes that’s the soldering flux that allows the solder wick and provides the hole fill. Poor fluxes provide inadequate hole fill
@user-rz3bs7yz8u8 ай бұрын
I do this all day in a bigger machine and bigger pc panels
@wtf_nene33335 жыл бұрын
Are you currently hiring? I do the exact same thing at my job ?
@RyanSmith-wo2pi4 жыл бұрын
Yep my Job in the mountains.
@TechnicalGuideji2 жыл бұрын
Awesome
@Chevroletcelebrity Жыл бұрын
oh wow. NEATO 😲
@znyzam140 Жыл бұрын
Still to new to SMT and wave solder. Would anyone be happy to share what are the parameters that we can control for wave solder process? Thanks in advance!
@jeyabalajic95007 жыл бұрын
wat type sensor used in the input tray feeding to conveyor how to senses
@Sh4dowHunter423 жыл бұрын
What an odd question.
@JohnPham20153 жыл бұрын
is there a small wave soldering for the home?
@Nicolas_GE2 жыл бұрын
for the home it doesn't make much sense, just get a good soldering iron or a soldering heat gun with good tips
@fbkl59432 жыл бұрын
Si las hay
@JohnPham20152 жыл бұрын
@@Nicolas_GE I have a few hundred boards that I need to wave soldering, hand soldering would take months
@JohnPham20152 жыл бұрын
@@fbkl5943 ??? english please
@vuziaroesdiantoro-gw3du Жыл бұрын
why lamda not perfect ? i see wave to bad
@grantnelson8804 Жыл бұрын
Can I share a short portion of this video on LinkedIn?
@agrowtekinc.4676 Жыл бұрын
Sure
@arafatislam9143 Жыл бұрын
❤❤❤❤❤❤
@viviennejaehn-kreibaum88526 жыл бұрын
From which company did you purchase your wave soldering machine?
@dominiko39535 жыл бұрын
Looks like ERSA EWS machine, lot of refurbnished or new should be on the market
@ee-mon-ee16533 жыл бұрын
You can just search wave soldering machine on google and ebay has one it's 58k though.
@WiseOwl_1408 Жыл бұрын
thats cool
@josefmolenaar22426 жыл бұрын
Anyone know to music used in this video?
@meercreate6 жыл бұрын
Pamgea - Kevin Macleod I used to use this same song in my videos.
@anupam_verma2 жыл бұрын
What's the price?
@phillip48332 жыл бұрын
the music is hitting lol
@user-ob2ux7hu3l10 ай бұрын
😅 in our i am workin from 3 months pn this machine
@jeyabalajic95007 жыл бұрын
we need service help flux motor problem
@mukund22kar7 жыл бұрын
What if their are smd component in bottom
@ClicketyClack7 жыл бұрын
Then you add those after.
@BenjaminEsposti7 жыл бұрын
They also sometimes use dots of glue to hold the SMD parts on while they go through the wave soldering machine.
@ubuntupokemoninc7 жыл бұрын
SMT parts on the bottom side get populated by a pick and place, depending on if the parts can be waved they will either be glued on with epoxy, or screened and reflowed just like the top side. If the parts cannot be waved and they are then reflowed on, there are two options for soldering the through hole components. 1: hand soldering, 2: a selective soldering machine which basically a CNC wave machine, it has a tiny little wave the you program to solder only a few spots on the board.
@distortion_tech_lab5 жыл бұрын
@@ubuntupokemoninc I imagined a robot with a solder dispenser carefully picking and choosing. I've heard of wave soldering and just watched this video out of curiosity. This board is pretty bare but I cannot for the life of me wrap my head around how this doesn't make a complete mess of more populated ones. Because I know how easy that is to do by hand with a momentary flinch. Relative temperature I guess? No cold spots to weld to.
@ubuntupokemoninc5 жыл бұрын
@@distortion_tech_lab It works beautifully, for a hobbyist with a hobby iron, maybe you will have troubles. but with strong industrial fluxes, good irons with proper temp control in the case of hand soldering is very easy. The only problem is bridging. Selective wave soldering has done away mostly with bridging.
@factsaina Жыл бұрын
Hello sir
@user-ib3ok2bh4h2 жыл бұрын
Вы хоть установку чистите когда нибудь? У вас что установка , что палеты засраны🤣🤣🤣