AGT QH12 Hydraulic Thumb Install

  Рет қаралды 3,606

SEMO-Dyer

SEMO-Dyer

4 ай бұрын

In this video I install a hydraulic thumb from Typhon Attachments

Пікірлер: 19
@dougadams9419
@dougadams9419 3 ай бұрын
I ordered the Thumb on March 6th.. It was delivered today, the 29th. I unboxed the thumb and to my surprise the adapters were include to mate the Thumb hose to the QH12 hose. PERFECT! Unlike another video where he had to get new hoses made.
@semo-dyer5183
@semo-dyer5183 3 ай бұрын
Same for mine, a pleasant surprise. Seems like the DIN connectors are not so available. How do you like the thumb? I'm still getting the hang of it but better than the fixed one for sure. Thanks for watching and the comment.
@dougadams9419
@dougadams9419 3 ай бұрын
@@semo-dyer5183I'm still installing it, ran into a minor problem. One of the bolts holding the mechanical thumb was stuck and had to use my 4.5" grinder with a cutoff wheel holding the bolt to get the pin out. Hammered it out and cleaned up the arm.
@semo-dyer5183
@semo-dyer5183 3 ай бұрын
It's always something, good luck and let me know how you like it.@@dougadams9419
@dougadams9419
@dougadams9419 3 ай бұрын
I got it working. But they don't tell you you need to bleed the air out of the cylinder. The first time I tried it, it locked with the piston fully extended. I loosened the connectors at the cylinder and a load of fluid blew out with bubbles. I pulled the thumb back to midrange and tried again, tightened the connectors and SLOWLY opened and closed and it started cycling correctly.
@dougadams9419
@dougadams9419 3 ай бұрын
You can replace the pin type grease fitting with M8 X1.0 Short straight Zerk fitting. 9mm. to remove the old, 10mm. to install the new ones.
@semo-dyer5183
@semo-dyer5183 3 ай бұрын
Thanks for the tip.
@dougadams9419
@dougadams9419 3 ай бұрын
My next mod is a pair of reversible 12V 80 Watt 8" fans. I have to get some automotive wiring and connectors and remove the rear panel. While I'm doing that I will hinge the rear panel for easy access. There is a video on the tube on installing a piano hinge on the left side as seen from the rear. The machine gets so hot I can't touch the engine bay panels, so I only run the machine for about an hour and then let it cool down.
@semo-dyer5183
@semo-dyer5183 3 ай бұрын
That's what I did too. I saw a different idea for the rear cover that was pretty cool. The guy eliminated the hinge by using two sets of the cam type closers. Now he can take the cover off. Thought that was clever. Good luck!
@whenworkisplay
@whenworkisplay 4 ай бұрын
Good morning Bryan, I think you are really going to enjoy the hydraulic thumb. I have been considering, for awhile, adding one to the backhoe on our little tractor. Thanks, I enjoyed the video, Ben
@semo-dyer5183
@semo-dyer5183 4 ай бұрын
Good Morning Ben, I used it a little more off camera and you are right. It makes it easier to pick stuff up plus gets out of the way if you want to dig. You should look into one. Thanks for watching. Bryan
@dougadams9419
@dougadams9419 3 ай бұрын
I'm also going to replace the short control rods with longer ones which will make it easier to control the hydraulics. They are too darn touchy to control being so short.
@JWPOutdoors
@JWPOutdoors 2 ай бұрын
Do you order this one, SKU TYPH-2008? Thanks for the video.
@semo-dyer5183
@semo-dyer5183 2 ай бұрын
Yes Sir. Here is where I bought mine. Took a little longer to get than I'm used to but It was well packaged, typhonmachinery.com/store/TYPHON-Attachments-Hydraulic-Thumb-Clip-Attachment-for-Mini-Excavators-USA-p503097126
@JWPOutdoors
@JWPOutdoors Ай бұрын
@@semo-dyer5183 Awesome. It's supposed to be here Friday!
@ItsAllApsyop
@ItsAllApsyop 26 күн бұрын
I just bought one, but I can't find the thumb control. Where the heck is this thing?
@semo-dyer5183
@semo-dyer5183 26 күн бұрын
Mine is on lower left side of control. Next to the steering lever. Did yours have the hoses for the thumb?
@ItsAllApsyop
@ItsAllApsyop 26 күн бұрын
@@semo-dyer5183 Thanks for the reply. I just found out mine didn't come with a hydraulic. I have to buy it, so I had to move the thumb manually by taking out the screws and readjusting the thumb 😁
@semo-dyer5183
@semo-dyer5183 26 күн бұрын
Mine had the hydraulics when I bought it but the manual thumb. I bought the hydraulic thumb and it was a game changer since I have a lot of rock to deal with.
1 ton mini excavator upgrade, hydraulic thumb install
18:46
Restoration Projects
Рет қаралды 6 М.
Chinese Mini Excavator: DIY Hydraulic Thumb
20:44
Fabbin Adventures
Рет қаралды 14 М.
DAD LEFT HIS OLD SOCKS ON THE COUCH…😱😂
00:24
JULI_PROETO
Рет қаралды 15 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Mama vs Son vs Daddy 😭🤣
00:13
DADDYSON SHOW
Рет қаралды 23 МЛН
Installing a Hydraulic Thumb on my Chinese Mini Excavator - Easy!
8:50
Short Wall Build With AGT QH12 Mini EX
7:25
SEMO-Dyer
Рет қаралды 2,4 М.
AGT QH12 Cooling Fan Part 1
8:24
SEMO-Dyer
Рет қаралды 1,3 М.
AGT QH12 Hinged Rear Cover
6:05
SEMO-Dyer
Рет қаралды 1,3 М.
The Biggest Dig Ever With The Mini Excavator | Garage Workshop Project Ep46
30:28
Homesteading Uncontained
Рет қаралды 60 М.
AGT H12 mini excavator upgrades
59:38
NaterTater01
Рет қаралды 3,7 М.
Buying a cheap value packed Chinese Mini Excavator Rippa
27:18
Mike festiva
Рет қаралды 150 М.
#1 ATTACHMENT: Installing a Hydraulic Thumb on our Mini Excavator
19:10
Green Acre Homestead
Рет қаралды 49 М.
INSTALLING NEW HYDRAULIC THUMB ON A MINI EXCAVATOR.
23:40
DIYwithCookie&Pops
Рет қаралды 125 М.
DAD LEFT HIS OLD SOCKS ON THE COUCH…😱😂
00:24
JULI_PROETO
Рет қаралды 15 МЛН