Airbox breather mod for Aprilia Tuono and RSV

No video

Airbox breather mod for Aprilia Tuono and RSV

Рет қаралды 1,994

Күн бұрын

This is the modification that stops oil forming in the air box of all gen 1 Tuonos, milies and RSV bikes made by aprilia .
If carried out correctly you won't see oil in your air box after this modification has been carried out , and might make it breathe a little cleaner .

Пікірлер: 15

@SoulDaddy33 28 күн бұрын

It sure is sparkly clean in there, alright. One would expect to see a small bit of oil residue that was left behind from the oil that came up and then drained back to the motor, but not even that bit of left over film? Interesting. I'm more curious about the carbon oil tank, though. What's that all about? Could it be a molded cover or might it be nicely applied vinyl wrap?

@captbarb6642 28 күн бұрын

It traps the oil and then runs back to the rear head when not in use ,it works well. The carbon cover for the oil tank yes that was like that when I purchased the bike many years ago I assume a carbon company had made them ,it might offer some scratch resistance if one was to have a little slide .

@paul8161 Ай бұрын

Never heard of that problem before, is it a big issue, had my bike serviced and its never been mentioned.

@captbarb6642 Ай бұрын

I've had it happen on all of mine even the caponord it enables you too run the proper oil level also .

@paul8161 Ай бұрын

@captbarb6642 many thanks for that, dam another job I need to sort, bloody bike is a nightmare 😳.

@captbarb6642 Ай бұрын

@@paul8161 trust me if you do this mod , you shouldn't see any oil in the air box . The engine might even run a little cleaner also , it's a really good mod to do.

@paul8161 Ай бұрын

@captbarb6642 OK sounds good many thanks.

@pardonwhat 4 ай бұрын

Did you check the wheel bearings on the Capo yet? Perhaps that might be worth a vid!

@captbarb6642 4 ай бұрын

We'll sort off just a.quick check last month when I had the wheels off for a tyre change .

@pardonwhat 4 ай бұрын

You wouldn’t have a photo of the cct board for the capo clocks by any chance would you? Bit of a mare with mine, just about to change tthe voltage regulator chip but the clocks have been previously dicked with and Im looking to see why the modded some connections! Night-mare!

@captbarb6642 4 ай бұрын

photos.app.goo.gl/bUbX4yfFUCrp2wdAA I hope this works apart from my vid this is all I can find .

@pardonwhat 4 ай бұрын

Thanks fella, I have a detailed pin out for the power regulator chip and a supplier, the only thing I dont have is a pick of the original connections; there’s some connections that don’t make sense to me yet.. I’ll do a vid if I am successful . Thanks again.

@captbarb6642 4 ай бұрын

@@pardonwhat best of luck I wonder if it worth looking at some of these other cheap dashboard on the market if it was one that could be calibrated to the capo sensors and inputs it might be the way to go

@pardonwhat 4 ай бұрын

Do you know anyone who has done that?

@captbarb6642 4 ай бұрын

@@pardonwhat no I don't but I think maybe a search on Google would show it has been done