AIRCRAFT | A320 Nose Landing Gear Wheel Removal / Installation

Рет қаралды 588,984

14 жыл бұрын

#Aircraft#Airbus#Maintenance#NLG#Wheel
AIRCRAFT | Airbus A320 Nose Landing Gear Wheel Removal and Installation
How To Remove and Install NLG Wheel
हवाई जहाज | नाक लैंडिंग गियर व्हील हटाने और स्थापना
ہوائی جہاز | ناک لینڈنگ گیئر وہیل کو ہٹانا اور انسٹالیشن
বিমান | নাক ল্যান্ডিং গিয়ার চাকা অপসারণ এবং ইনস্টলেশন
Pesawat terbang | Penghapusan dan Instalasi Roda Pendaratan Hidung
Aeronaves | Remoção e instalação da roda do trem de pouso nasal
Kapal terbang | Pembuangan dan Pemasangan Roda Gear Landing Gear
Phi cơ | Lắp đặt và tháo lắp bánh xe mũi
aereo | Rimozione e installazione della ruota del carrello di atterraggio sul naso
Avion | Dépose et repose de la roue du train d'atterrissage avant
อากาศยาน | การกำจัดและการติดตั้งล้อฟันจมูกล้อ
विमान | नाक ल्याण्डिंग गियर पel्क्ति हटाउने र स्थापना
Flugzeug | Airbus A320 Bugrad aus- und einbauen
Самолет | Снятие и установка носового колеса
Aeronave | Desmontaje e instalación de la rueda del tren de aterrizaje de nariz
Subscribe to Discover more clips:
kzfaq.info?...

Пікірлер: 104

@ruskoruskov3803 11 жыл бұрын

Yes finally i can change the tire of my A321 parked on the street outside. Damn what could i've done without you!!!

@rdknegt 10 жыл бұрын

Excellent tutorial! .. Will keep it in mind for when i run a flat in my A320 ..

@keonphoenix1559 6 жыл бұрын

Robert de Knegt rkoo r fnkl8yt6

@MohamedSayed-vy3su 6 жыл бұрын

Robert de

@sergiovalente9595 6 жыл бұрын

Robert de Knegt jm

@alexcabril9844 6 жыл бұрын

Robert d e KN et

@Rwalt61 2 жыл бұрын

I have to change the tires on my A320 frequently because when I land I do some drifting.

@zlatimirzdravkov3906 8 жыл бұрын

Excellent training for me ! Thank you !

@raashidansari4320 2 жыл бұрын

Perfect video searching frm hours finally got it. Thanks mennn❤

@rashidjafar 13 жыл бұрын

Nice video and Informative

@terrellmiller4425 10 жыл бұрын

Great video studying now to get my A&P great video for learning

@Tjita1 12 жыл бұрын

@WeBashPeople It is easy compared to some of the other tasks you might have to do under heavy stress and with minimum tools and assistance as an A&P.

@Hopeless_and_Forlorn 8 жыл бұрын

No, the A320 does not have nose wheel brakes, although the Boeing 727 did, at least originally. The reason the parking brake is released after chocking the main wheels is to relieve any lateral stress from the nose gear before jacking. This stress can be caused by setting the parking brakes (on main gear wheels) when the airplane stops, particularly if one engine is still running. With the brakes set and the nose tires unable to move sideways, the stress could move the strut laterally as the jack lifts the tires off the ground, causing the jack to fall over. After landing, the parking brake is usually released as soon as the chocks are installed, to prevent hot brake discs from sticking together. Even if the brakes are cool, it is good practice to release and reset the parking brakes after the chocks are installed, to remove stress from the gear.

@Nextbillenior 2 жыл бұрын

kzfaq.info/get/bejne/nbl5rKmIr626dn0.html Small fighter jets attached on corps 😁 E

@philipstephenfifi 11 жыл бұрын

Really good instructions to follow

@rrox4210 6 жыл бұрын

Nice working

@chechnya 12 жыл бұрын

@dropmech Why is using a torque wrench a no-no when loosening the nut?

@tumumshana8171 9 жыл бұрын

I liked it,wish to be one of you

@Snafu320 12 жыл бұрын

@itsmonti1 The chocks are in, you don't need to set the parking brake...

@user-kb8jn6ki8d 6 жыл бұрын

Good technical

@CHITOWNGANGSTA1981 11 жыл бұрын

Forgot to set the parking breaks & the left side wheel had a low psi which reads 55 psi & the other readings where at 60 psi on the computer !!!! But I'm getting my A&P soon but short videos like these are great for learning & they do help.

@Tjita1 12 жыл бұрын

@Stingercam21 I do indeed. Although I never finished my practical training and thus never became a licensed EASA Part 66 technician, I have done all the exercises in school, including the paperwork. Never changed a wheel on something this big though, but we did it on a Fokker F27 once, and multiple times on a Cessna 150, a Scottish Aviation Bulldog, and on a Saab 105 (Sk60 in Sweden). Think i did it on a Piper PA-27 once too, for a brake job... Nevertheless, 30 minute job = 30+ minutes paperwork

@aviatorjet4943 11 жыл бұрын

muito bom

@dtiydr 11 жыл бұрын

So the bearing is just a glide bearing?! I was sure to see heavy-duty roller bearings there.

@kirmizigulm 12 жыл бұрын

@Stingercam21 Hello, I have a question. why he selected the parking brake off?

@nordinm6792 6 жыл бұрын

The NLG of a jetstream is so easy

@aribachtil1 6 жыл бұрын

Can u fit a 20" sparco sport rim?

@SubodhKumar-pd9ok 5 жыл бұрын

Very good i lije it and i want to do one time actually i m a techanician an light aircraft

@jrsp391 5 жыл бұрын

y los guantes? cubrecuerdas antes y después de quitar y instalar rueda

@fredhankes5608 8 жыл бұрын

For everyone commenting about using a torque wrench to loosen the nut, remember he has to measure and record the torque of the nut for the maintenance records

@marjan8888 8 жыл бұрын

+Fred Hankes no you don't,you back off the nut after the first toque setting,then you re-torque it to a lower value

@mnn1717 7 ай бұрын

They didn't apply the parking brake afterwards?

@Tjita1 12 жыл бұрын

I did 3 years in an equivalent to the american high school in the the Swedish aviation city Ljungbyhed and another year to become a technician at the school Flygteknik Technical Training in Nyköping, Sweden.

@hassanch4687 9 жыл бұрын

Cool

@aviatorjet4943 11 жыл бұрын

no BRASIL não usa o sensor de rotação.

@rohanmishra6344 Жыл бұрын

As per amm parking brakes should be on while removing wheel

@dimos47ki7 11 жыл бұрын

maybe you know why he must release the parking brake before changing the front wheel? i saw the other video with the rear wheel, and it made sense, since they needed to rotate the wheel, but the front wheel has no brakes anyway

@ScottPC 10 жыл бұрын

Thanks I've allways needed to replace my front tires on my airbus...

@pranendranathmisra1954 7 жыл бұрын

Brakes are kept off even though Nose Wheel doesn't have the brakes. The reason is during jacking the nose wheel, the plane is lifted at front creates arotational movement of the aircraft , fulcrum being at Main wheels. Main wheels may rotate a bit and if the brakes are on it will resist the main wheel movement.

@Tjita1 12 жыл бұрын

And when you're done doing all these, find a comfortable chair to sit in while filling out the two billion pages of paperwork...

@donschmonitz8575 5 жыл бұрын

Good to know. I am going to have to change a flat on a big ass plane tomorrow.

@turbo7215 6 жыл бұрын

How to: 14 bolt with 10.5"/11.5" ring gear - wheel hub removal and installation, demonstrated on a A320 front nose gear.

@kabansw1 11 жыл бұрын

а что это за приспособа для контровки такая?

@samirmaissour5801 9 жыл бұрын

at the end you forget to activat the landing breaks

@balto2455 5 жыл бұрын

wtf is a landing brake??? you mean parking brake?

@frankbutaric3565 3 жыл бұрын

What is the point of placard on the brakes as the front wheel has none? Personally I like the brakes on so the aircraft does not fall off the jack.

@DavidBerquist334 6 жыл бұрын

how often does a tire have to be replaced

@GamerBronyxD 10 жыл бұрын

parking brakes??

@arjunmuralidharan7233 8 жыл бұрын

Best example to show how not to do a wheel change , (without any safety measures ) and how did he roate the wheel while torquing opposite direction or the same direction ?

@dougvanderhoop8012 6 жыл бұрын

Arjun Muralidharan Yup, I caught that a well. Rotate in the opposite direction.

@xairman565 12 жыл бұрын

I'm pretty sure that you should set the parking brake outside on the ramp. But you don't set the parking brake inside a hangar though. Besides, the video showed the guy releasing the brake on an aircraft. It fails to mention that he should be setting the park brake if he released it in the first place......

@TheRoccoruby 11 жыл бұрын

howmany men does it take to change an a320 tire

@itsmonti1 12 жыл бұрын

And he forgot to set the Parking brake at the end. Good going, Mister. You just lost your job and I just got hired on to replace you.

@Ryzen_56X 12 жыл бұрын

@Tjita1 yes indeed.... hehehe talking in own experience ?

@Ryzen_56X 12 жыл бұрын

I'm an A319/20/21 technician, this is just a type rating course training video. Only for demonstration purposes. Later on every certify technician uses his own protection gear, googles, gloves, etc.

@cubsfan2869 6 жыл бұрын

Well this is no pit stop is it?

@khoney696 11 жыл бұрын

why set the brake off, its only the nose wheel

@PrSts 11 жыл бұрын

You forget to set parking brake "on"

@johnnydavis8351 8 жыл бұрын

I've always been curious. .."how do you steer the aircraft when landing gear is down "???????..

@dougvanderhoop8012 6 жыл бұрын

Rudder at high speed, then as the aircraft slows the rudder peddles provide up to approximately 6° of nose wheel steering then a hand crank operated on either side by captain or copilot provides input to hydrolic steering actuators capable of approximately 30-35° turn.

@FrenchValleyAirport 11 жыл бұрын

BRB, gtg change my airbus tire outside

@johnwolf9319 7 жыл бұрын

Good way of putting out your eye - you never remove the Schrader valve stem (valve stem) - you remove the entire Schrader valve assembly with a 1/2 inch socket set and let it bleed down. If you remove just the stem, it is easy for the tire pressure to blow the stem back into the mechanic's face.

@nevenmaher1134 7 жыл бұрын

John Wolf 1

@nevenmaher1134 7 жыл бұрын

John Wolf 1

@dougvanderhoop8012 6 жыл бұрын

I use a valve core removal tool that captures the core to prevent injury.

@FrenchCrow 6 жыл бұрын

John Wolf, You seriously mean that a technical instruction video from Aerospatiale is wrong, but YOU are right?

@Juppie902 12 жыл бұрын

huh what does the circuit breaker panel at the beginning has to do with anything ? tire pressure has something to do with electricity ... ?

@Aerodave11 4 жыл бұрын

Yes every parameter is monitored to give indication on the cockpit and the info goes electrically hence CB pulled when working on the system as standard good practice. In this case tyre pressure, for main wheels tyre px and also brake temperature.

@ratnakantpanda175 3 жыл бұрын

Why parking brake yo be off as there's no braking system on nose wheel assembly 😂.

@alindamanda 10 жыл бұрын

The tire was new anyway, you can see the paper there. This was made only for show...

@dannydoestf2438 6 жыл бұрын

Thx, some douchebag stabbed my a320 tire and this tutorial helped me repair it.

@MIrfanMalik 5 жыл бұрын

Parking brake not engaged.

@crapper1 11 жыл бұрын

Now I don't need to call AAA when I blow a nose gear tire from hitting curbs

@Operation_Blackbird 6 жыл бұрын

No but JetBlue does, kzfaq.info/get/bejne/m9Z7paRpsNC9pps.html

@denivros 12 жыл бұрын

@itsmonti1 no , you see at the end that the parking brake is on

@anonov1 11 жыл бұрын

It's not 'Landing Gear,' it's known as undercart or 'Gear'. Planes don't just land...they take off too and they taxi around the airport....so 'Landing Gear' name is not representative.

@dougvanderhoop8012 6 жыл бұрын

anonov1 100% you are mistaken. Both Boeing and Airbus refer to them as landing gear. Google a maintenance manual or check ata codes. Why do you post on something you know nothing about?

@69team69 12 жыл бұрын

Did he loosen the axle nut with a torque wrench??? Bad bad.... :)

@kafpraise 6 жыл бұрын

Airjohnjohn John Yvette. O

@kafpraise 6 жыл бұрын

Airjohnjohn John n

@snakeius 5 жыл бұрын

LOL, They forgot to avoid the DIRTY DOZEN !!!

@mustafashk.shabbirpalodawa8102 9 жыл бұрын

No safety shoes No working gloves No safety goggles

@airlinesjobsearch5192 8 жыл бұрын

YES . NO SAFETY

@marjan8888 8 жыл бұрын

+Mustafa Shk. Shabbir Palodawala why would you need safety glasses?

@amrickdhillon1283 6 жыл бұрын

No problem

@DC8Combi 6 жыл бұрын

Because he’s a man not a snowflake

@vajabhagavan8145 6 жыл бұрын

Mustafa Shk. Shabir Palodawala નઞટે

@clusterguard 5 жыл бұрын

the guy forgot to set back the parking brake.

@paulwalsh3700 9 жыл бұрын

apply handbrake ...

@driayoubayoub913 6 жыл бұрын

A cava calam hh hh taana lafr

@sameerallset 9 жыл бұрын

Nose wheel got brakes?

@TheCvvalk 7 жыл бұрын

no lol. i don't know why he put pb off

@amsimoes69 10 жыл бұрын

is a gimbal bad. I went to the wrong buyer

@mdalamgirhussain7917 5 жыл бұрын

Where is the brake disc???!!!

@Aerodave11 4 жыл бұрын

brake only on main wheels

@reubendsouza2003 8 ай бұрын

I have to write this in my journal in college😅 please someone tell me what is tpis

@gemingboydip9086 6 жыл бұрын

@hughghazz7906 5 жыл бұрын

A320 is am mechanics nightmare.... compared to the 737 this takes about 3 times longer to do the same job... Why airlines buy buses instead of aircraft is beyond me....

@dropmech 12 жыл бұрын

WRONG! Two things that jumped out as being incorrect procedure. 1- he used the torque wrench to loosen the axle nut. That's a no-no. 2- he doesn't have gloves on. While that axle grease probably isn't that toxic, it still has chemicals in it. Shame on you for posting this up in a public forum.