Airfix Sherman Firefly Starter Set 1/72 scale review and build 2021 box

No video

Airfix Sherman Firefly Starter Set 1/72 scale review and build 2021 box - HD 1080p

Рет қаралды 8,120

Күн бұрын

If you would like to buy me a cup of coffee, visit here:
www.buymeacoffee.com/ordinarybloke
To donate your Flying Hours to Models for Heroes, go to:
www.modelsforh...
In this video I'm building the 2021 re-box of the 2020 Sherman Firefly starter set from Airfix. Is it any good?
00:00 - Introduction and History
02:44 - All About the Kit
04:29 - How to Make It
Music from Uppbeat (free for Creators!):
uppbeat.io/t/s...

Пікірлер: 55

@quiddity1977 Ай бұрын

Going back in time for this build! Currently building this kit about 30 years after I last tried to do any modelling (I was terrible!). So far it's coming out really well.

@BarryPennock 20 күн бұрын

Nice relaxing narrative! Looks great finished!

@richarddufault 2 жыл бұрын

The non-starter kit version of this one has an extra sprue with more complex tracks tracks and bogeys, and also has the the plate to cover up the bow MG but the instructions still don't mention it. Great build!

@ryanandtech3164 2 жыл бұрын

I like what airfix is doing with these starter sets

@randalscott7224 2 жыл бұрын

The part on tbe engine cover is a travel lock for the barrel when the tank was being transported. Not sure if there was a locking mechanism in the turret itself but the travel lock prevented the thing swinging loose.

@garys_stuff 2 жыл бұрын

Ahh, of course it is!!! I've seen them on SPs before. Thanks Randall!

@randalscott7224 2 жыл бұрын

@@garys_stuff nice build by the way!

@garys_stuff 2 жыл бұрын

Cheers fella!

@davidsirett5560 8 ай бұрын

WONDERFUL

@simonleib1992 Жыл бұрын

Got this kit as a birthday present working on it now. Great video thank you.

@garys_stuff Жыл бұрын

Hope you enjoy it!

@1hackmodeller557 2 жыл бұрын

Another great result and very well done video. I look forward to those sets arriving in the US.

@malcolmwilkins2495 7 ай бұрын

its a barrel clamp,turret would swing around into the clamp when moving under non combat situations.

@craigwall5865 2 жыл бұрын

Hi Gary hope you are well.. Just purchased this kit in my local game shop. Just watched this upload and find it useful to watch before building and painting the kit. You have done a great job on the kit. All the best craig..

@garys_stuff 2 жыл бұрын

Thanks Craig, hope you enjoy building it!

@stevesinclair4159 Жыл бұрын

Wardaddy : Best job I ever had!

@FredWilbury Жыл бұрын

Nice to have the history in the vid , I’m just building the Airfix kit with both track options regards fred

@jackpenny1910 2 жыл бұрын

really cool build, nice work!

@garys_stuff 2 жыл бұрын

Thanks!

@liamgray9805 2 жыл бұрын

Happy New Year, very nice work, well done.

@garys_stuff 2 жыл бұрын

Happy new year!

@petermerz2704 2 жыл бұрын

Very nice! Cool build!

@garys_stuff 2 жыл бұрын

Thanks!

@lpjmodels 2 жыл бұрын

Nice work and a great video !

@garys_stuff 2 жыл бұрын

Thanks mate!

@jameshall6147 Жыл бұрын

Moulded tracks on small armour is much easier as alot of kits this size are gaming pieces, rubber band tracks were a nightmare.

@TonyB868 2 жыл бұрын

Terrific value and looks decent quality 👍

@julianmhall Жыл бұрын

Watching this again it's just occurred to me. In the wartime photo the Firefly has tank tracks on the front hull* - according to a WWII British tank veteran on Combat Dealers that was done for extra protection. Maybe if a spare length of tank track could be obtained that could be stuck on the front and cover where the machine gun is but shouldn't be. * Edit: No I tell a lie, it doesn't, but it could and that would be an easy way for a modeller to cover up the gaff.

@garys_stuff Жыл бұрын

There's probably lots one can do to make it more 'authentic' and spruce it up - I've got one so might try that one week - how to make a starter kit even better...

@bunnyniyori6324 2 жыл бұрын

Good video :) Had to chuckle when you were unfamiliar with some of the parts of the tank :)

@garys_stuff 2 жыл бұрын

I know how to drive them, don't know what all the bits are called!!!

@darrenhillman8396 Жыл бұрын

Nice job!

@garys_stuff Жыл бұрын

Thanks! These new starter set tanks are a delight to build and could really help bring new people into the hobby. Hoping for an expanded range next year...

@modelmagic9930 2 жыл бұрын

I would highly suggest that you remove the excess wash so it doesn’t look overdone

@the-primered-thumb 2 жыл бұрын

Nicely done mate 😁👌

@garys_stuff 2 жыл бұрын

Thanks Tim 😁

@DawnEdits11 2 жыл бұрын

Beautiful nice job

@garys_stuff 2 жыл бұрын

Thank you! 😊

@mattluszczak8095 2 ай бұрын

Gosh i hate.doing the tracks. Ill take this over assembly of them. Rubber ones are ok but gluing them togethernis hell

@SullysScaleModels 2 жыл бұрын

Nicley done mate

@garys_stuff 2 жыл бұрын

Cheers!

@stevenbreach2561 2 жыл бұрын

I may be mistaken,but wasn't the hull mg removed for extra ammo storage?

@garys_stuff 2 жыл бұрын

It was indeed as mentioned in the video. The non-starter set of the Firefly has the gun blanked off, I'm told.

@seangrimes2770 2 жыл бұрын

love the shows and videos; have took your advice and invested in a timber tech airbrush set. i tend to use revell/humbrol paints so with that what would you recommend as a good primer? Mr hobby? Vallejo? any advice would be much appreciated

@thekinksfan5102 2 жыл бұрын

My experience with some primers. Vallejo Surface Primer has very poor adhesion, it scratches easily, not recommended. Stynylrez - also re-bottled an sold as Ammo Mig One Shot Primer and Ultimate Modelling Products Primer, has very good adhesion, dries very fast into a hard finish, and is sandable. Downside is that as a waterbased paint it tends to suffer from tip dry. And I have had bad bottles from both UMP and Ammo. Mr Surfacer 1000/1200/1500, lacquer based, so they stink. Easy to spray, smooth hard finish, dries instantly, sandable. And know there's a alcohol / water based version of mr surfacer, Aqueous Surfacer 1000. Relatively mild smell, sprays very nicely, smooth finish. It is starting to find it's way to Europe, but not many sellers have it.

@MOS6510Models 2 жыл бұрын

Hi Sean. Personally I would look at using a rattle can primer.. humbrol and tamiya do a great primer but majority of us buy a cheap one from Halfords.. rattle cans are a great easy way to prime a vehicle

@garys_stuff 2 жыл бұрын

I agree, I use spray cans. I used to use Humbrol but it was starting to get expensive (I’m making too many kits obvs) so now I use jenolite or hycote plastic primers. Available through a famous online store if your local hardware store etc can’t help.

@seangrimes2770 2 жыл бұрын

@@MOS6510Models thanks! Have looked in Halfords this afternoon and seen the grey/white primers. I’m trying to get better at my model aircraft hence the reason I bought an airbrush to improve paintwork etc. should I decant it first into the small holder on airbrush for better control? Also what cleaner would they use? White spirits or cellulose. Many apologies for the questions

@MOS6510Models 2 жыл бұрын

@@seangrimes2770 No need just spray right from the can, keep it 8 inches away and gently blow it in.. gives it a good base for the paint to stick too,,,

@crazylocha2515 Жыл бұрын

I bet you had this in the tank waiting for it to go back on special sale again didn't you? 😜☕🐢

@garys_stuff Жыл бұрын

Are you suggesting I may be repackaging previous videos under a new brand? That'd be like, oh, like a company releasing kits again with shiny new boxes. What was that? They do? Hmmmm, time to get a-editing!

@seantaplin581 2 жыл бұрын

how about the 1/35 cromwell?

@garys_stuff 2 жыл бұрын

Sean, if I buy one more kit at the moment I think you'll hear m'dear wife screaming at me... I do enjoy AFVs though so maybe in a couple of months I'll start on some of the others...