Hey can you review more crosman p1 full auto pistol

@@devondixon460 that's a nice one

@@devondixon460 Yes, will order this month. Full Auto video do great for views. Thanks for the reminder!

My HP max ss by AEA in 50 cal loves the air Venturi shot shells

​@@AirgunChannelalso macabespeed here on KZfaq makes custom stick mags and other accessories for all the AEA guns.. if you e never watched him I'd highly recommend it.. support the community and maybe get some great ideas for content

Yeah, it's pretty nuts in real life!

@@AirgunChannel Yea I bet guns looks a tad bit smaller on camera

I guess this .50 gun uses .495 ammo.

Just wait cormastar! I'm shooting an Airgun Technology .45 in a couple weeks. A $2000 precision shooter .45. Couldn't tell you what it looks like...still on the box. AGT makes a pistol too! Got it

You get what you pay for..... I'll stick to custom USA built big bores not junk being mass produced in china....

@@ConnerHolifield I would never touch anything made in murica.

@vihreelinja4743 then your just plain stupid.....

@@ConnerHolifieldunfortunately not much is made great in America anymore and tons of stuff that’s really well made and reliable that we use every single day is made in China. It’s a crying shame but that’s the world we live in today

That's what the ATF said!

Sounds fun!

Dunno how hot it gets where you're at but I'd definitely re consider leaving it in the car long term. But I'm somewhere that it hits well over 110 degrees in the summer

Just make sure to find some ammo that fits the breech. Mine was too large, had to hammer the bolt closed at times..with a hammer.

@@AirgunChannel Sorry to hear that we will work on getting some better ammo for the megalodon. Great video I loved it!

Yep, everyone should have the right to bear arms!

2 words... Black Powder.

Yes, well sort of, NOT BLUE STATES, where the definition of a "firearm" is as flexible as what is a woman !

​@mini14head less reliable. As a handgun I agree blackpowder is better, but there's not a lot of good repeating blackpowder long guns.

​@@lolk4530black powder is dangerous to carry around because it can explode on you. This brand however has a pistol that you can carry as well. So I'll take this all day. There is a 2 shot pistol sized shorty shotgun that takes quick loader slugs and powder but still only two shots and would be hard to carry a shorty around especially more dangerous in the summer heat if storing in a car.

Good question! It's alot cheaper.

It groups fine out of the .50 HP Max and the Big Bore Challengers, I don’t know why it wouldn’t work fine out of a Megalodon

Roundballs group well with my HP Max .50 (with pump-action kit). Always get a .50 over a .45, cheap ammo!

@@akseminole Awesome info. Thank you!

Wait till you see the NETVOR

@@AirgunChannel I just watched a video on a FURY 20mm. Absolute insanity.

Awesome, If it's hard to load it just means you need ammo that is sized right.

Thanks man. He is now called Master Blaster! (I changed his name from Megladon)

Thanks...yes... don't get in front of one of those!

No problem! -Nate

Agreed.

You mean "it will keeeeeeeel"

Thanks man! More on the way!

It's a fun one!

Thank you! -Nate

It is a BLAST to shoot!

I agree. Wait till you see the ZEUS 2 Tactical!

@@AirgunChannel 😃 let me guess zeus 2 is a full auto .72 cal!!!🤪 Look forward to your review!

Thanks man! Rock on! -Nate

The new versions have fill in front. Just ask the guy

@@AirgunChannel, yeah , I got one with 22 inch barrel, was pleased to see the fill port where they put it. I got a 50 by accident , I actually ordered a 457. Decided not to go through the hassle of shipping it back, got 100 slugs free for keeping the 50 cal as well. My only gripe is the piece of rail on the bottom. Good idea but it needs more than 2 screws, it moves around some, I wouldn’t trust it to hold with a tripod attached , mine moves side to side , that’s a really minor thing though. Over all it seems like a solid rifle. Nice content by the way, will sub.

Sim, é um verdadeiro canhão de mão!

Awesome!

Yes!

Yeah, that thing has got the Power! Happy shooting! -Nate

@@AirgunChannel 🎯😎🎯

Thanks man! -Nate

How long will the air stay inside the gun if you kept it by your bed side in case of emergency?

Thanks for tuning in! -Nate

Thanks man! -Nate

Thank you! -Nate

It's stronger than it looks.

Maybe the cocking will get smoother after it breaks in.

@@AirgunChannel Hopefully but I still love it cause I don't have any other compact guns.

Use a PTFE or a Teflon lubricant on that bolt. I am the proud owner of three notos all because of Nate and his air gun channel!

@@ricko2766 alright will doo

There are probably some nasty loads out there for sure!

Yeah, gotta love a good pump action.

Affirmative.

It does.

Thanks for watching! -Nate

Thats what I said!

It sucks

The ammo doesn't fit so it won't cycle most the time.

@@AirgunChannelReally?

Yes, it is good. The firwst one I had the fan broke but they sent me a brand new one. Try Optics Planet to save about $500 on it.

Yeah, it's like real firearm power.

www.krale.shop/us/sport-shooting/guns/air-rifles/

There is a new gun every week. It never stops.

Nice!

Thank you! -Nate

Thanks for tunign in! -Nate

It would work for that. Now I get it!

That is what I was thinking. Perfect for hunting. But he said self defense. Why not both idk? I would say semi auto for SD and something more reliable. But what do I know

There is no such thing as an MOA group with this gun at any distance. It was shooting a 6 inch group at 20 yards away! ... for a 1 inch group you would have to be about 10 feet away. This is a Hog gun: kzfaq.info/get/bejne/ns9jlKaUv-CbZ3U.html

AEA's can be that way, but they are great guns...just check all the bolts for tightness when you get the gun. AEA does stuff no one else does.

I’m a veteran, and a dedicated prepper. I study every new product and even shocked Bin Tac with my knowledge of these products. He confirmed one thing: that value wise, the Challenger.50 cal is the most air gun for the money that they make. Like Hatsan, their mags are not great and they have quality control issues. If an upgraded mag is made, then certain products are worth it. Honestly, for sub-$1000 air guns, it’s a roll of the dice unless you buy Air Force, like my Air Force Escape: Durability, power, w/ a Lothar Walther barrel, and Hand pump friendly in case your compressor is incapacitated. I also think the Avenge X is a worthy purchase, and the closest experience to operating a high end, regulated small bore. For long term reliability, I respect Air Force, Western Air Guns & American Air Arms. Sometimes, it’s worth saving for quality; especially if it’s life and death. Stay safe.

Mission complete!

Thank you for watching! It is alot of power!

No, About half of them break during the review. Many returns.

Emperor will do the trick!

It cost too much. I may ask the Airgun Miami guy about his company and try to get some free stuff. I agree it would be great to see.

@AirgunChannel maybe you should try to see if you can get a patrion account going ,pardon my spelling, for that kind of stuff see if that helps with the cost. from what I have seen the big bore air guns seem to have mid to low end pistol cartridge performance. it would be nice to see how alot of other air gun manufacturers stack up in the performance department. from a self defense perspective and most importantly. from a hunting perspective. then real life no bs magazine capacity and easy of use. and after that. how would these air guns fair in dirt and mud tests to show that they could be viable in the great out doors. there are a few that I know handle well out doors! love the work by the way!

I did have cycling problems because the ammo was too large. I had to use a hammer to get the bolt closed about 1/2 the time. With proper ammo it would be bad ass.

@@AirgunChannel smiles yeah. the hp max has the same issue too heavy and you gotta beat on it, if they give the platform to you i can explain a mod that can fix that issue completely friend. or two mods depending on how you enjoy the bolt working at this moment. because one is a modification to the bolt itself to allow a larger slug and for it to work like butter but you would lose that lock out function that platform has on the pump action . the other is a breach mod that takes a dremel stone and ccreates an incline there inside where the breach and rifleing meet and look there it has a 90 degree wall there like they do not actually know how to manufacture the thing correctly, but if you take that dremel stone and put it in a drill and run it in reverse into each rifleing groove and along each of those walls it will allow a larger slug without the beating. i have done all these mods on my hp max pump action already. and aea made certain things on the megaladon like the mags , tank and that lock out function on the bolt so that people like me would not want that platform. so if you find it becomes your platform let me know. my bolt runs with one finger if i am not using the pump action, and mags load like challenger mags do without holding the bolt back manually. this is what i do , i take aea guns and finish the manufacturing that should be simple for them to have done but they want to cut corners and leave it for us to finish. see if i cannot interchange the mags and i know that i cannot. i would buy a different caliber for that platform if i buy one. but i already have a 500cc tamnk that will fit that one and a 600cc tank too and a internal regulater that will work with either tank. and aea does not have a single regulater left from the hp standard custom edition platforms, in fact they made this one after the fact because i broke mine and needed another one. so using it on the mega , i would have the only regulated mega around. so buying one is tempting. but like i said i already have a .51cal 22inch barrel 500cc single front tank externally regulated hp max with all the mods already completed and a magnet on my folding stock to keep the thing closed and so short , like27 inches long shortwhen folded, and 7lbs weight. so i have a better platform now. the hot swap is cool. but i already have that adapter from the element max rear tank.so i could make that on this platform at the cost of my foldy stock and i like this stock and a 27 inch folded length. feels perfect in my hands for punpping. i do not even have one of my great kami's on it. by the way you get a 58/72 great kame and put a ported piece of pvc in the 72 cal front end and it will work with m18 .45 and .51 cal also and .58 cal too and be quieter than the great kami that is m18 and made for the .51 cal. i would say you can also take a 13mm drill bit a foot long and run it through both ends of your current dony, but i did that to my emperor v3 and , well it lasted 6 months and then my emperor got assasinated and blew apart on video, one of my element max videos to be exact. along with two separate shrouds that i made to try and integrally suppress the element max. haha anyway the great kami 58/72 was a better option and i think the outside diameter of the pvc pipe was 74cal so i drilled port holes twards the barrel end to suck the air off and placed it on the 72 cal end and hammered it in with a no mar hammer till it was half an inch from the 58 cal connection and had a half inch left from the front end of the great kami so the air could get sucked off the projectile in both directions, and the thing costs$285 then i bought a true .51cal m18 great kami and the one i modded was better . so now i have both. and added another layer of thick felt to both and some magnesium powder so if anyone tries to use them on a firearm they will melt themselves to that firearms barrel and become unusable. just in case the atf decides to say i have suppressers ya know. well if you need any advice with an AEA airgun just let me know. this is why i am the last word. i do this thing. sure wish i had more than the amount of subscribers i do , but all mine are like dony fl is my sub, fox air power is my sub, a airgun maker in the phillipenes is my sub and on and on, all of them company big wigs. but i still wish i had a sub base like yours, course i wish that i could see out of at least one eye too. but i cannot, completely blind here. but i challenge anyone to make a 10 yard shoot at a 6x9 target(the size of a deer's head) and hit it while completely unable to see. say a 5 gal bucket on their head or a towel wrapped arou nd the head, and me i can take 50 shots and hit that target at 30 ft with 47 of the rounds. well a 48th clipped the side but that was an unethical hit so i do not count it.all the others would have hit the deer in the face and went through and into the spine and lungs or heart with the deer lowering its head to take a bite of whatever i put there to attract a deer. one time and i doubt it will ever happen again, i woke from a nap in my hunting spot , blind as a bat and the rag i wrapped around the barrel end was bobbing up and down , a deer was licking the blueberry juice out of the rag. smiles . yes i shot it, stood up took two steps found the kicking deer with the barrel gave the coup de grace. and went to field dressing it right there after cutting the deer's throat pulling out two trash bags and a pack of baby wipes. when done i took the pre-filled out wrd and rolled it up and stuck it into the carcass mouth, punched my tag and tagged the bag of meat, and called to be picked up , cleaning up and using the 2000ft paracord i had to get back out of the woods and to the road. for my ride, who filled out the other date part of the tag. course that was shere luck. i am inventing a parabolic mic to be able to listen to game chew at a hundred yards, and almost done , just need adjustment plates to be able to zero the thing. buig bulky and has a dish like a cereal bowl but it will let me hear myself rub two fingers together at 4 ft away. so at a hundred yards it should let me hear a deer or hog chewing and huffing breath, and 6 inches above that sound is a brain that needs an injection of lead. smiles simple huh. and logistics, is another paracord out from the shooting spot, lined with sweet corn , or whatever i was eating when i came out. so my shot will be out from that cord and i will just leave it there with de scenter on it . and whatever is at the end , i put a third paracord at 90degrees 50 yards each way and more of whatever i was eating ,( i am a messy eater in the woods) haha and that will bring my game quarry to me, that is logistics for a person who is completely blind. and once that game is on the line comming twards me its head is twards me. and a deer always lowers , chews , raises , lowers , chews raises. repeat, and a hog just roots so almost always has its head down. either way that brain pan is presented at the time of the chewing sound. well i know i have bored ya, take care friend. you can hit me here any time. the last word @airgunz_militia you tube

Link to item in description!

It's just a tad over 12 foot pounds!

@@AirgunChannel Haha :D

Yeah, don't get in front of it!

@@AirgunChannel not a chance. Felt real ones that didn't do damage like that. Nuff said

Probably not on the 22 inch. My work here is done!

@@AirgunChannel 👍😎👍

Yeah, Semi Auto would be better.

The semi auto only puts out 250ft pounds.the megalodon can do more

@stefmyster9038 200gr at 265 ft lbs is a dead home invader. We are talking home defense not shooting grizzly bears at 80yds.

Whats an eye pro?

Experimente aqui: www.krale.shop/us/sport-shooting/guns/air-rifles/ ou tenho certeza que a AEA deixaria você ser um revendedor se quiser vendê-los

I know. That's one airgun I won't soon forget! Too dangerous to keep for me though. Makes me nervouse.

Here is what I think: kzfaq.info/get/bejne/a7OUZdarmLy7ooU.html

I do have a T9 as of today.

Here you go: www.airgunnation.com/threads/aea-megladon-pump-action-50-cal-849.1314621/#post-1768931

Try "Airgun Exporter"

That gun had a 15 inch barrel it pushes them 900 +

I agree. That's one I won't soon forget!

sad

I agree. It is a top coice!

Poor trees!

Should be here: kzfaq.info/get/bejne/nZl3oJynltjQipc.html&pp=ygUSdGFsYW4gdHVuZXMgdHJpcG9k

It's firearms level power

@@AirgunChannel but air is silent by nature.

yeah, about $300 too much

called the Donny FL Emporer

That one was shot against the rock pile with forest behind. I also have this: kzfaq.info/get/bejne/kKpnbNRer6vOqnk.htmlsi=QOm9J9TtmMyVdXwc&t=110

Regular air,oxygen

Should be no wait time. If you call them or the pellet shop they can do that, or the .22 may already have more air.

@@AirgunChannel I haven't been able to find the 15" .50 cal anywhere, but there are 22" barrels in stock. I'm tempted to go with that and _maybe_ cut it down to the tank length (probably ~ 16"-17"). My only concern is the threaded piece on the end of the barrel. I'm not sure if that's for a suppressor, or if it's even needed, but It doesn't look like it would be an easy job to properly rethread the end of the barrel. The bigger tank would be nice, but not a must-have. I definitely want the shorter barrel though. Apparently, so does everybody else.

That stuff cost like $100

@@AirgunChannelyou can make it yourself

Do you guys not get it? 950 fps + 50 cal slug = death with one shot.

many

@@AirgunChannel what are these many

No, they are no non lethal It will kill a human

That’s what I thought too… till I heard “450 foot pounds…) O-0 O