i changed the hopup and inner barrel from we-tech to maple leaf and you'll see better results !

I love how glock makes its own bb guns and how they make them look so real kzfaq.infoUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ , the only thing is that the slide doesn't move back. The sights and the body structure is so similar to a real handgun, fits in my hand perfectly but I actually ordered it with the 40 pack of Co2 tanks and they never arrived even though it said that they handed It to me. Was not able to test the accuracy since I didn't get everything I purchased which is frustrating and that's the whole reason why I got the bundle so it arrives together. So the Co2 tank happens to be a third party so it makes no sense to put it in the bundle if it doesn't get shipped at the same time, the BB gun arrived first then the Co2 tanks were supposed to arrive someday later but didn't, which doesn't make sense. I recommend just ordering the gun itself so you don't get the same issue I ran into plus there's no option for a refund. How stupid.

Elite force/vfc/umarex mags do not work properly in KJW/WE because the gas route seal shape is a marui type which is curved to match the marui loading nozzle which is cylindrical, the WE/KJW one has a flat seal and flat bottom loading nozzle, they might shoot but wont likely cycle your gun and wont be gas efficient you will also wear out the Elite force magazine gas route seal very quickly if you use it in a we/kjw. DO NOT DO THIS WITHOUT CHANGING THE MAGAZINE GAS ROUTE SEAL TO FIT THE OTHER. The differences you noticed in the blowback unit is the fact kjw is a direct copy of WE tech so those are actually interchangeable. The Elite Force/VFC/Umarex glock series uses a Marui type blowback housing which is a little bit fatter and has tabs in the front section that are fatter than the rest of the body meaning they wont fit in a we/kjw slide. Marui type blowback units are what you want because they are highly upgradeable. Umarex/vfc/elite force also use a marui spec hammer chassis and hammer assembly so we/kjw are also not interchangeable with the umarex/vfc/elite force (marui) type.

Nicely made video. I'm leaning toward the WE tech because I can get it for cheapest by a good amount and the quality and longevity seem good

Well done video and informative , still contemporary info, you should contemplate to make a series like this, comparing airsoft guns and compatibilities , cheers Max.

One major issue I had with my first KJW KP17 was the rear sight screw. Its located in the blowback housing keeping it connected to the slide. The screw is small and stripped easy. The threads kept coming loose and I would notice my rear sight and blow back housing would get loose with every magazine shot, possibly from the shock. I had to use loctite blue to stop it from falling apart.

Hey Max, will the WE green gas mags work in an Elite Force Umarex Glock 17 gen 4 co2 pistol? If so are WE mags different or the same for the entire WE line of Glocks?

thats so great of you to have different brands on hand to compare, it would be much appreciated if you can do a mag compatibility across them. e.g. if WE mag can fit in Umarex or KJ Works, vice versa. This could be one thing we want to know. Nice work btw

I think it's a pawl-type in Elite Force, compared to KJW and WE that uses wheel-type in hammer slide.

Holly molly a small arsenal you got at home ...respect

Very nice video man, love your comparison.... only one thing, you may want to fix the cam setting so that it doesn’t change go change light setting all the time Be good if you could reduce over expose too....

The we tech is made out of zinc alloy, a much cheaper and much weaker metal commonly known as “pot metal”. Heavier does not equal better quality or stronger.

You demonstrated the magazines fit was interchange, did not touch on if they would interchangeably fire. will they fire and cycle interchangeably with no issues?

Great video, seriously. Answered a lot of my questions I've been googling the entire day about. Think I'm gonna go with the EF version, weird how the FPS is supposedly so low here as the site I'm planning to purchase it from claims about 112m/s (roughly 360FPS?)

Hey nice video there! Could you inform me how long slide of tokyo marui glock 17 gbb would breaks? And if you have suggestion, I'm typically not wanted to upgrade my gbb, I just looking for gbb that out of the box are have decent performance and great durabillity without upgrading them, so what I should do is just maintenance them, could you suggest what brand of glock 17 type of gbb that I should pick?

does the we tech slide work with the elite force frame?

Thanks dude you have cleared that up for me. Going to have to get the vfc glock. Cheers

Haw about holsters/accessories fitting? I'm working with gen4 glock 19 with Olight pl mini light and i'm looking for airsoft glock that fits real steel duty/kydex holsters with that light

I was wondering would a we glock slide fit on a kJ works frame, they sell these gen 2 frames but they are replacements for kJ works but I was wondering if I could use it to customise a gen 3 we glock, is that doable does the slide fit okay?

is the umarex glock 18c full auto barrel threaded? i went with we tech because i knew there barrel was threaded and i wanted to attach a tracer unit. plus it was half the price. i still plan on eventually buying the umarex version too because its the fully licensed version.

I realize this is kind of an older video but would you have any recommendations out of the three based on prolonged use?

Hey dude, do you think fab defense cobra stock will fit these? i want to build something crazy.

great vid but the elite force mag will actually hold about 24 plus 1 in the chamber

1 more question: the thread in the front of the barrel for a silencer or a tracer? Which one has a threaded barrel and which one hasn’t ?

Hey mate, can we "'release" the slide of the KP-17 by pulling it back like the other glocks ? I don't know if you understand but I'd like to know ^^

Hey I know this vid is kind of on the older side, I was going to get one but I really want one to mimic the actual feel of a real Glock ( not interested in how they look because they all look good in my opinion ) but more of firmness & feel, from your experience of course. Also, what would you pay for these as of 2021?

When you pull back on the EF slider it seems to catch at first. Is this more realistic or a flaw?

cant conclude without range test! its the important bit

Which one was the easiest/cleanest to get the orange tip off?

But the drawback possibly is the slide compatibility, you probably won’t be able to swap the Umarex slide onto the we frame and vise versa cause the frame internals are different on the two being the Umarex vs the we tech :( have you tried swapping slides and see if they function properly? Just wondering (as in the we slide on the umarex frame or the Umarex slide on the we frame? Let me know if possible thx :D

where did you get the strike device thats on the KJW glock? been looking for one forever

Which one gives the most power? And aside these which pistol air Glock has more power

Love Pantera, great shirt!

I wanted to know which one is the loudest when firing and the strongest?

Do all the glocks featured can use the same suppressor? I know the WE has a threaded outer barrel and is compatible with the WE P-virus (Custom P226) striker compensator. Just curious if the others could as well.

Does the we tech take metal billets and where do I buy it and is the site legit

You can not use Umarex and Tokyo Marui mags on WE and KJW and vice versa, since the first two have a round piston chamber bottom, while the second two have it flat. They will click into place, but there will be a lot of gas hissing to the sides.

The silver we tech glock looks so nice

Very helpful video thanks

My Glock 17 umerex gen 5, it's Mag match or not with bell mag ?

Are those type of muzzle accessories called “Strikers”?

How to remove the bottom plate of the kjw glock to fill gas?

i saw the reviews on crowns airsoft for the G26 or it could be any of there products, the people that gave it a review said that there stuff never came in or they have been waiting for months and it still hasnt come in yet can anyone confirm if this is true or like has the same problem?

Very good comparison video. I'm looking forward to your thoughts on the Elite Force Glock in action. Oh, and nice shirt too.

Umerex seem to need to beef up the slide with inner rails ???

Can WE glock 17 gen 3 blowback housing be installed on TM G17 gen 3 slide?

I think that KJ and Wei follow TM design ?

On my elite force glock, I sheared off the edge of the mag release where it catches the magazine while doing aggressive reloads. It randomly drops mags while shooting now. I recommend upgrading the mag release to a real steel quality, which i plan to do. Hopefully i don't break it again. I have a KWA HK Match that drops magazines too, however its brand new and has done it since opening the packaging. Its mag release is completely different since its HK, so idk how i'll fix it. Is this common on airsoft guns? I'm not sure how i'm supposed to use them to train or even use them in a game if they are this fragile.

Which one do you think is the best?

Can you switch slides between them all?

The Elite Force is closer to the weight of the real steel. 23. 2 oz the real steel is 22.75.

WE TECH for me, now to decide on 17 or 18 and which GEN lol...

Link for where to buy the elite force ?

Can any of them remove backplate for a custom one?

Nice comp review, I like it.

Are the lowers interchangeable with the uppers? For example, if I want the elite force lower because of the nicer trigger pull, but want the We tech upper because of the heavier metal upper for realism. Is that possible?

Either I’m Jesus or I have really good magazines, but I got 95 shots on one gas fill from my WE G17

Glock perfection

One thing you failed to mention is that the Elite Force's mag gasket is the arched type. But the WE and KJW's are flat.. Yes they would actually work, but there would also be leaking of the gas if the WE or KJW mag was used in the Elite Force or vice versa.

And most parts of WE brand and KJW are interchangeable but not the frames like gen3 to gen4 swapping its not a plug and play but rest of the parts are interchangeable

great help for a newbie like me... nice shirt by the way...

Is the we 34 better than the elite force 34?

Our of curiosity does anyone know which ones fit real glock mags?

Quick question Max will a We Glock 27 be compatible with an elite Force Glock 19 magazine???

You get a thumbs up for the shirt from me \m/

Is it a threaded barrel elite force

Are the mags interchangeable? I noticed the elite force mags are like $50…

Will the 50rds mags from umarex or any other be compatible with the we tech Glock

Are the parts interchangeable?

Did he compare slides? If so when

Isthe Umarex Glock slide racking accurate to the real Glock?

I will be buying a WE Tech glock 18c, I plan on using it extensively. Anything I should know about it? How long should I expect it to last? I’ve heard the hammer is weak on the g18c and to use lots of silicone oil when using in full auto

Can you please tell me the upgrades that you made on your "custom tm/we g17" i'd like to upgrade my we g17 gen 3 pistol too 😊

Love the pantera shirttttt

just picked up the elite force G17 gen 4 and was wondering if any one had or knows of any barrel extensions or attachments for the internally threaded barrel. thanks!

Bro is the we tech 19x gen 5 good

ive been looking for a suitable training aid for my real g19. would it be okay to dry fire these completely with out co2 or bbs, or possibly just without bbs?

Ok so which one is the best ?

which is the best one

Nice video man

I dont know why you called having an aluminum blowback housing cheap when custom tokyo maruis are literally swapping out stock bbh with aluminum made ones

Question: can the slide interchange with each other or elite force is proprietary?

where did you get the custom glock baseplate?

so can the WE tech mag fit in the elite force glock and still work?

Waw amazing Nice il likeit kolektion glock.

The pros about the elite force is that they already comes kinda tune up good quality parts and we tech stocks sucks but once you buy custom inner parts it will be more pro accurate than elite force and pieces are everywhere also elite force sometimes are out of stock if we talk about gen 3 😢 I love all the same just like my cats 😅

Im a leftie but I shoot airsoft guns with my right hand. I do alot of things with my right hand

Which is the leaderboard?

Were can I get a elite force g17 holster? Amazon would help me

what umarex glock is that

good vid bro

Hello and thanks your Cousion from over the pond Lol

I'm interested in glocks

I guess all of these three might be pretty all good, but I tvink I'd personally lean for a KJW if I was up to buy an airsoft G17..

Really like the Umarex Glock 17 gen 4, licensed by Glock, nearest CO2 to the real thing

Any links on where I can get a KJW or WE Glock. Looked at Evike and couldn’t find anything.

what about tokyo marui glocks

Can you link them

What about upgrade ability

Raven Series?? What category does that come under??