hi. those reaper rounds fit a 40mm grenade launcher?

​@@asmodeuszvYou will need the Taginn "EVO" 40mm shell

Do you fly to events and if so how r u travelling with your hpa tank ?

You probably dont give a shit but does anyone know a method to get back into an Instagram account? I was stupid forgot the password. I appreciate any tips you can give me.

@Ali Jeffery Instablaster :)

I mean, I don’t want bbs in my ear

Clearly if you only go in jeans and a hoodie, you don’t understand the sport. The grenades are very loud (especially the stun grenades) and if you get a bb in your ear, good luck not suffering some sort of damage.

@@apenguin84 r/wooosh

Phathom r/woosh/woosh

@@apenguin84 r/wooosh/wooosh/wooosh

Cool and thank you for your service - Delta-01

These Under Armour boots I must say are very comfortable. Thanks for watching!

False.

Have fun being cold and miserable then

12356asdfgyeioeoejxvcbl988 in snow with taller boots it’d probably work well, but in pouring rain that hasn’t been my experience

Them being non water proof for me is a con because I use these same boots for law enforcement and I Tell you it suck to stand around in wet boots plus they aren't slip resistant and that's definitely a con because no body wants to bust they're ass at work .

Thanks!

Airsoft is great you'll enjoy it I am also getting into it I've been paintballing but I have not been in an airsoft game yet but plan to in the near future

CODEwater Airsoft and More Thanks!

Shhhhh

That my job

saw that too

Nerf should be cheaper and similar

An alternative is gel blasters. Same look as airsoft but uses gel balls/baby crystals as ammo. Try look for one.

Thanks!

Thank you!

Thanks!

I know a lot of guys on my team run chest rigs when we play down south in the heat. Its all preference.

Sameeee

Id recommend getting gear over time so you know what works for you. This loadout took at least 3 years to get to this point. Id start with a nice plate carrier

If it were an AEG I would offer some counter points but given that its a HPA set up your absolutely right. Your HPA is so unlikely to fail that you need not worry about it and could use the space and weight from the pistol and mags for other things. At more intense MIlsim games such as Milsim west you actually have a strict ammo supply so even loading up your pistol lowers the amount of ammo you have for your primary.

If you're looking for airsoft fields/arenas check out airsoft C3. They have a map of all locations in the US. airsoftc3.com/fields I've been playing airsoft since 2014 and switched to HPA in 2016. If you plan on playing a lot of airsoft HPA is a very reliable and accurate system. I've only had my HPA line snag a handful of times and never caused any damage. Mini carabiners work great for routing the line. Thanks for watching!

I plan on going every week to every other week

So from my experience HPA has its own pros and cons compared to AEGs, With HPA you get pure reliability for your gun as it is a robust and fairly simple system with less parts to break. It will shoot well and reliablly as well with adjustable FPS. Downside is just how bloody expensive it is. Be prepared to drop well over 1k on everything. (gun, rig, line, tank ect) and you are some what limited on what fields you go to depending on how many tanks you have. 1 tank will usually last you a full day of play depending on how much you shoot, but you can only get them filled at proper locations which can limit where you go. And the line can make certain locations a bit of a pain. More woodland areas are going to snag far more often than CQB arenas. This can be avoided with routing the line and tying it down but then you face the issue of if you ever need to swap sides to shoot your tethered line will prevent that. The plus side of all of this is that if you do get in to HPA and decide you don't like it, most HPA gear tends to keep its value pretty well so you won't be out quite as much money.

These are the clips I used for mine. Thanks for watching! www.amazon.com/Alpertie-Adapter-Tactical-Suspension-Headset/dp/B00PTVNQMO/ref=redir_mobile_desktop?_encoding=UTF8&fbclid=IwAR1ISXbCp9nMlt76OF0CgYeJiPLSHXcrbFmLoLpQLKVYBHXG-34vyNCyQOo&psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2

Also here is an instructional video on how to mount them to the clips kzfaq.info/get/bejne/fal-lcxzuqnJcoE.html

@@hcrepublic1525 thank you so much for the link. i have been looking all day trying to figure out how that worked.

Nathan Williams it cost at least 900

www.ebay.com/p/FMA-CP-Helmet-Protective-Pad-TB768-8pcs/2035983676?iid=152484879266&chn=ps These are the ones i'm using. Much better than the standard ones when placed in properly.

HC Republic Hey, thanks for the quick reply i threw you a sub and followed your insta good shit bro.

Thanks man I appreciate the support!

Amped Airsoft sells them for event pickup only. You can order them for pickup at OpX or any other event they attend. Also feel free to use our coupon code"DarkHorse10" to receive 10% off your order! ampedairsoft.com/enola-gaye-eg67-frag-grenade-event-field-only-pickup/

I won't be able to sorry, Thanks for watching!

Hazztech I sanded down the inside so the shell would fit

@@hcrepublic1525 please show us in a video! I've been thinking of getting a grenade launder but until now haven't been able to justify it

@@Hazztech Im working on a milsim gameplay video using the launcher right now. I sanded the inside lips down with these and an extend drill bit. I also removed the safety latch so the pin pushes farther out into the shell www.lowes.com/pd/gator-10-pack-1-in-w-x-0-75-in-l-multi-grade-pack-commercial-sanding-drum-sandpaper/1209735?cm_mmc=shp

Chinese KAC suppressor I got in a trade. Built solid though

Carl Novak Usually they last me all day and still have air leftover. The fusion engine is very air efficient with the red nozzle and red poppet.

Ryan Fitzgerald I used these clips www.amazon.com/gp/aw/d/B00PTVNQMO?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2

Here’s the video I used to install them kzfaq.info/get/bejne/fal-lcxzuqnJcoE.html

Yes