Hello! Great review although I had already bought the keyboard haha (the purple one). I've installed the software you linked but I think it has not been translated properly because I can't see any tags or any text in any button. I'll try to find the version you have on my own and update if I find it but it would be awesome if you could point me out in the right direction.

Nevermind just found it my bad

@@Alieseila can u link for me? thanks

@@Koreayoutuber it's linked in the description of this video.

Not sure but I think driver software need to be installed for persistent config

Wired: 5-6ms, 2.4ghz: 7-9ms, Bluetooth: 15-16.

I prefer XDA keycaps myself as for switches, that really depends on your preference as well. I like variations of yellow liner switches but thats just me.

Yes definitely

💀💀💀

Correct

@@GalaxyTechReview Thank you sir. That is just the info that I'm looking for.

yes through the software, in the software right click on any key you want to change and then go to "Custom Funtion" then in "Key Type" drop the box down to "Multi Key" option it then gives you up to 3 slots to configure.

@@GalaxyTechReview Multi-Key translates single keystroke to sequential keystrokes (up to 3). For example, instead of hitting W and getting W, you can make it type 1, 2, then 3. After some tinkering, I ended up doing the following: - Set 'Fn Layer' to 'Momentary' mode. - Set Fn + PgDn = End - Set Fn + PgUp = Ins Can use 'Toggle' mode but I find it confusing as there is nothing indicating which mode you're in. Can't seem to use Home and Delete keys for this purpose as I think they are reserved for mini display functions: Fn + Home = Turn display on/off Fn + Delete = Switch between info screen and animation

I have not run into this issue myself, mostly because I use it wired. Hit up Ajazz customer support ans see if they can give you a better answer on this than me ajazzstore.com/pages/contact

only on games that let you use a keyboard but yes

language is done through pc settings, thats about it

@@imexo153 Ah, I see. Thanks!

For the screen, yes. But you can change the language through the pc settings

The knob is not mapable

the keyboard must be plugged in to use the software but yes the keyboard will retain the lighting changes and modes if used wirelessly.

​@@GalaxyTechReview i see, btw does the brightness setting in the tft screen change the brightness of the rgb or the screen? I wanna know if you can change its brightness

It should turn off due to inactivity but you can always toggle the switch to USB position which would be off

@@GalaxyTechReview ty i got another problem that is every time i start my computer the gif screen changes to the time screen instead of the gif that i add any fix please?

12:49 in the video in the software, go to the TFT screen portion of the app and click on the button on the bottom right hand corner called "Time Syns" This should sync your computers time to your LCD.. make sure you are in wired mode when running the software.

please note it will only display 24 hour time no 12 hour clock.

That light should go out once the keyboard is plugged in and fully charged.

@@GalaxyTechReview ah okay, thanks

did you download the software I linked in the description? can you give me other details more than just "not working" are you trying to connect to it with the keyboard wired direct to your PC?

You can certainly re map those keys in the software, yes.

I am not sure as I do not own any Apple products, sorry.

Change it to mac mode and bluetooth mode on the back then turn on bluetooth pairing mode, check how to do that on the manual

Replace the keycaps with ones that have transparent letters. The ones that come stock do not have shine through keycaps.

I'll look in the box again to check I don't recall them being in there though.

@@GalaxyTechReview appreciate it but it's all good, ended up going with another keyboard

They are not "Shine Through" keycaps, you would have to buy a keycap set you like that allows the RGB to shine through the letters.

thats what ive been trying to figure out too!!

I use it to game and have no issues what so ever. :)

Contact the place of purchase for a replacement?

try here epomaker.com/blogs/software/ajazz-ak820-pro-driver

and just checked, it is still up on my google drive link..

I didn't think so I found them to be nice. But that's just my opinion.

yes

unfortunately you cannot, hopefully in a firmware update they will enable it.

you mean the software for when you are plugged into the pc that I show in the video? if so it's here for windows. www.whatgeek.com/pages/software-downloads

no I meant the only wired edition not RGB

yes completely

Go into the screen settings twist all the way to the right and the last menu should be language you can chose Chinese on English.

as far as I know it has double shot pbt keycaps and the height is OEM profile.

This is correct. Height is OEM profile and the keycaps are double shot PBT.

@@bof8oom aight thanks ! i notes that OEM profile are slightly higher than Cherry Profile

@@samiRetro777 yup, quite a bit actually.

try holding down the fn key and spacebar key for about 5 seconds to manually reset settings to factory and start again?

if that doesn't work, try a different USB cable

@@GalaxyTechReview thanks màn some how it works again when I turn my laptop back on after couple hour

There is no software for Mac at this time, windows only.

Maybe get the keyboard to a friend

I have not seen the software for a MAC, no.

hi @@GalaxyTechReview thanks for the quick response! I was wondering if I customize this keyboard using the software on a windows PC, will I be able to use the same customization on my mac?

make sure your keyboard is using the wored connection and download the software I linked in the description, that is the saoftware I have tested to work.

Use the Bluetooth mode

You can easily replace the keycaps with one's you like.

thank you for the reply, I really like the feel as they are, but would not know how to find the exact same material with see-through feature@@GalaxyTechReview

It should wired or with the dongle (not confirmed on the dongle)

Using it wireless it should go into sleep mode after inactivity. Or just switch it to USB mode and when you shut your pc off its off.

it has 3 modes, USB wired, Bluetooth and 2.4ghz wireless with a wireless dongle. So yes you can.

Assign a key combination through the software to any key if you need it...

@@GalaxyTechReview Thanks for answering. The software is very complicated, there are 2 keyboards, 2 layers, 2 modes... I don't know where to start. Have you considered making a video tutorial about it? That would be a banger, maybe even a 100k+ views video.

No you need to plug in to run the software then you can unplug after you set your gif

Turning the switch to the "USB" wired position turns it off unless it is plugged in.

They shipped mine with Ajazz Linear Moon Yellows, not sure why they changed them up.. Maybe the rebranded them.. Contact whatgeek and they might be able to tell you.

Hold down "FN" and "Q" for bluetooth 1st device, hold down "FN" and "W" to add a second bluetooth device and "fN" and "E" for a third device, If you have one already connected to BT1 then do "FN" and "W" and you should see "BT2 Listening" on the LCD screen, it is now ready to pair to a second bluetooth device. Of course make sure you are in Bluetooth mode with the swith on the back.

no sorry

Yes.

It has been great for me, no issues at all.

put it in wired mode and unplug it from the USB cable.

sure through Bluetooth.

Yup scanned it many times and activly use it on my PC with no problems..