Akrapovic Slip-On Exhaust Install - 2015 BMW R1200GS Adventure

Рет қаралды 22,046

Күн бұрын

Please click like if you like the video!
Check out my main channel for more videos:
/ motoken
----------------------------------------------------------------------------------------
To contact me:
/ endlesspcg
/ ken_patrick
----------------------------------------------------------------------------------------
#bmw #bmwmotorrad #bmwr1200gs #r1200gsa

Пікірлер: 31

@joelstevenson1018 5 жыл бұрын

I had to do the same for my Tiger XCX. Those inlet caps mad my silencer quieter than stock! As soon as I removed them I got what I paid for. That Akrapovic sound.

@BarbaryStudio 5 жыл бұрын

Nice video without the db killer it sounds amazing i like the deep sound I havr the leovince carbon on my gc 2014 lc it is so aggressive sound How much cost this exhaust and is it europaelln spec or UK spec

@EchosAdventour 5 жыл бұрын

Can you please send a link where you bought yours

@aidanpysher2764 3 жыл бұрын

Did you have to take off the carbon fiber cover to remove the baffles? I have the same slip-on, with the welds in the pipe itself.

@240fxst 4 жыл бұрын

You just removed exhaust tips. Now the finished look of that wonderful looking exhaust is compromised :(

@motoken 4 жыл бұрын

Crack

@3ricoffice727 5 жыл бұрын

can i know how u release the welded screw ? Any specific tools ? electric cutter wont fit that space right ? wondering how..

@motoken 5 жыл бұрын

you need to use a dremel tool.

@3ricoffice727 5 жыл бұрын

thank you.

@nightlyghost 5 жыл бұрын

Auctally the baffle adds power lol it’s hard to understand why exactly but think of it as a water hose fully open water doesn’t come out far but put your thumb over it shoots out the water further

@motoken 5 жыл бұрын

Back pressure

@nightlyghost 5 жыл бұрын

Ken Moto hmm yeah you can say it that way 😄 but most percicly it’s call restriction to flow 😄

@motoken 5 жыл бұрын

@@nightlyghost no I didnt make that up, that's the official term to what you're explaining lol.

@nightlyghost 5 жыл бұрын

Ken Moto I’m saying it in a Physics way 😄

@EchosAdventour 5 жыл бұрын

I have to disagree with your theory, the more you let the air out of engine the better it run but louder it gets. If you put buffle on the pipe it puts little pressure inside the engine thus less air comes out (little less considerably nothing really made difference to the bike) but it sound lesss louder.

@starkravingdazza4606 Жыл бұрын

Have the same silencer, great vid but I have a question… I’ve got the bolts out but the db killers seem very well pressed into place and aren’t coming out at all. How did you get them loose?

@motoken Жыл бұрын

I just pulled..as long as your dB killer isn't welded like others may have. Sometimes, there's a weld holding it.

@starkravingdazza4606 Жыл бұрын

Oh ok. I did wonder if the little tac weld for the bolt may have gone a bit deeper but can’t really see to tell. As it is it’s not budging at all and being recessed in the carbon cap I can’t really get a grip of it. Trying to avoid drilling out rivets for the end cap

@motoken Жыл бұрын

@Stark Raving Dazza I didn't have to drill the rivets out of the carbon cap for sure. At most, it would be welds but on the bolt itself holding the bolt in place. After that, it should be just a matter of pulling.

@starkravingdazza4606 Жыл бұрын

I’ve managed to get one out pretty easy but the other is jammed fast. Tapped round it a little to see if it’d shock it loose and managed to push it IN a mm so at least I know it’s not welded lol. Need something long enough to use as a drift I think 🤔

@31acruz 5 жыл бұрын

the baffles out made it better, but still..is it worth the money is the question.

@motoken 5 жыл бұрын

Its minor, its deeper sounding now but I knew I was buying it for the looks more than anything.

@lpete531 5 жыл бұрын

Nice touch 👍🏽 and cut some weight off the bike also

@robertogalanjuan6025 4 жыл бұрын

Hi, is that akrapovic euro4? Can dbkiller be removed without problems? With dbkiller does the sound show a difference with the standard? Thank you! Aprende a pronunciar

@art0fevil 4 жыл бұрын

Euro 3 baffles screw is outside of the cap. Euro 4, hidden inside of the carbon cap.