Be sure to put multiple moisture traps on the feed line to the machine. The moisture will clump up the dry ice and clog the machine.

Rob doing the scene from Fast and the furious, where's my motor with a funnel was hilarious 😂🤣😂🤣😂

Was hoping Rudnik was in the box and would pop out ha!

Definitely setup some type of dust screen. You could set up some type of curtain that drops form the celling around one of the lifts. As long as its mostly boxed off the dust should settle on the floor in only that area. There would be some spill out, but it would be way better than just blasting in the open.

make sure you convert to the larger fittings, it would surprise you how big of a difference it makes

You need a good air dryer to prevent the dry ice machine from clogging up. Idk if your compresser has one built in.

No words, just pure laughter. The little skits and fun you guys have really make these videos great.

Sam you don’t need a new compressor you just need a good sized tank!

Let’s gooo sammit. Love the content bro been watching you for years 🤘🏽🤘🏽🤘🏽

Keep up the content sam, can’t wait for mini sammit to come 😆

That's a badass, $1200 not bad, definitely will put on my bucket list for my shop. Would make it easier and cheaper to clean parts.

One thing i've noticed while dry ice blasting is the fine nozzle is good for small areas but a more open nozzle( like 10mm opening) will clean a broad area nicely. we also have a fan style nozzle that works well on large sections. Our machine cuts the ice so we buy it in blocks instead of pellets

I want Japanese Wendy’s now, and to see all the other stuff you ordered 😂

I loved that when he started throwing the co2 bottles in the box, I thought to myself: " This is why men don't live as long as women". Then, Sammit confirmed my thought by saying the same thing. 😁

Please keep up the explosion, I love it😂 Always trying to predict when you edit it in!

Awesome video as always Sammit. When are you going to get a Nissan President VIP car?

As someone who did dry ice blasting as a full time job, whats needed is: larger air lines, air dryer and decent gloves for handeling ice kus -78°C will cause coldburn

Remember you can dry ice blast your Jordans!

With the new compressor also check the CFM flow and the bigger the hose the better there’s a big difference between what a 10mm hose can flow compared to a 13mm hose This time size does matter 😮

You have now made me addicted mate XD have a good day and keep up the good work sam

I didn’t know what was in the box until you said that this is the quickest way to remove wax, then I said oh it’s a dry ice blaster, then you said yep it’s a dry ice blaster, I think I read your mind

8:01 That intercom lady wast spitting fire!!! 🔥

0:49 lol if you listen to this part where you say "super excited" with the subaru in the background, I hear "subaru sided" sometimes depending on if you look at the subaru😅

"The electrician" lol

Great vid Sam! ❤

Love that takeaway edit , please do more 🇭🇲

Adamlz watching Sam wave that dry ice blaster around near his subaru 👀 🤣

You could use the gifted compressor for all the air tools in the garage, and buy a second bigger one for the dry ice machine, so you can use everything at the same time but you also have a backup plan if the other one break down's you never have to deal with having no air... i have it set up like that at my garage for my trucking company wich i also use to work on my personal cars, but ye those air tanks i got installed there are huge in comparision with the one here, because you can maybe tight down one truck wheel nut and you will be out off air with a tank you got there lol, i would go for a bigger tank so the compressor dont have to run constant on full power to fill it up, it also does save you a lot on your electric bill if you use a bigger compressor, because it dont need's to fill it up constantly, those dry ice machine's really need a lot off air to get the best result's out off it, i also own one.. nice shop btw! Keep up with the fire content my friend!!

Look up compressed air tank explosion videos before filling your air tank through the normal inlet, drain port and pressure gauge port at the same time

Very fun!!! OMG dry ice!!! This is pretty much like a sandblast but without the freakin' sand!!! gosh that is really a good machine for the price indeed.. I really wonder if it can sandblast some rusted brackets and stuff, let's do a test !!

I could be wrong, but the bottom attachment point on thr second tank is for draining the water out...

You know Tommy is dying laughing looking at that crap machine

"Iceman" Sam for all your dry ice blasting needs 🤣

finally, the jaamata is back!

loved the dry ice bomb content lmfao

You could purchase a larger air tank, and then pipe the two together for some more volume. Would be much cheaper than a new compressor

You can also think about getting yourself a Vapour blaster , I made one for my own garage and for cleaning up small parts it is awesome

just get a big noisy one and only use it when you rely need it. they will be a lot less money. before you get a bigger one look at your power socket and supplay as 20HO is like 15-18kW+

Was shipping always 40 dollars for shipping to the US, I'm trying to order the dafski air freshener and a key tag

It’s more about flow rate not pressure with dry ice machines, that and moisture control, might be worth getting some aftermarket attachments as they look a bit janky

DIB's are so sick and amazing if you are doing any kind of restoration work!

check the max pressure that tank can handle before filling it to much, dont want a tank explosion

I did to my car too... after that the whole car was covered in wax...and what was not on the car was on the floor of the workshop... ...was fun...

If it came from China surprised it wasnt destroyed in transit..Test time well done Sam. Great lateral thinking. "Iceman" Good score... outside work and keep the shop clean... Sugoi arigato 🤘✌️🇦🇺

you need to tape off the s15 like its getting painted when you clean it or you will have wax on everything in your shop

Where's my engine's Ted 😆

Love the videos make great job bud

LOVE YOU SAMMIT FROM NEW ZEALAND

Maybe hang some plastic sheets around the lift when you do it so you dont have to clean the whole shop?

I think Sam should do all his adds in the box from now on

3:05 ..... OOOOF 🤣

Id be cleaning that oil cooler instead of a tyre they are really hard to clean 😅

@SAMMIT Can you provide the link to the Dry ice blaster?

Looks like it may work but not have a big nozzle to do large areas. Doing under the car will take 4ever

Hahahah I love the fast and furious reference

sammit i love how you compair prices of things to how many S15s you could buy, i use to do the same thing with playstation 3s , but that costs like 5 ps3,s

Garage is so sick brah . The love studio !! Visit Koda bro

We have a Wendy's in the U.K and i was disappointed that the burgers are very small and for the price it's crazy.

That dry ice blaster is gonna spark Sams cleaning ocd for sure!

Poggies great purchase Sam

Ooooohh shit the explosion💥💥...got me again ,Damit Samit

Send the link of the dry ice machine from the site??

That's awesome! Always good to save money!

I had the cheese flavored fries, melon soda. A Japanese flavor burger and a spicy chicken burger when I was there.

as soon as you told uss. "wax removal" it was dry ice blaster.. then you told us. ;)

Now you will be OCD like Adam LZ love the dry ice blasting we use this on printing presses.

Love you sam but i find it hilarious you're wearing a 350$ NZD hoodie and talking about "affordable" stuff hehe

Need the section off an area, dry ice blasting creates so much mess. Feel bad for them floors

FIRST HIII SAM IM A HUGE FAN

Make sure you put a big air dryer on it it will help it work better

Also suggestion when you do the S15 drop plastic around it. To contain the mess at least a little bit. 😆

No one saw the big ass electrical arc when he plugged in 😅

Hope that thing lasts, and if so, have fun restoring all the things!

Great content.

You don’t need a bigger compressor call the company and ask for a quote in a proper setup You connect the drain valve to the air that a way for killing the compressor Need a bigger tank,dryer,0.25 blue pipe,electric drain valve and Air regulators Those compressor need oil filter and air filter changer every 3 moths And check belts

When I visited I had a mega mac (double big mac) and they were shocked I ordered it for myself. It was honestly tiny

CANT BELIEVE IM SO EARLY LOVE your videos:)

Funny thing is I’m literally eating Wendy’s watching this video 😂😂😂

is it crazy that the first thing i saw was that you have the same jordan 1s on as i do? I got them because they are Boston celtics colors ( usa nba team) lol. Im from and live in Boston . Keep up the great vids

Might not be good to blast low TW tires with ice lol they don’t handle the cold well

Somebody, where did the gc8 come from?

hope it works for a long time,some cheap product only works few times

Sam make shure you have a real nifty Screw compressor like a atlas copco there a belgium company but there screw compressors last a lifetime and do what you need them to do. There quite expensive though

maybe you can get one of those roomba cleaner robots and run it while you dont use the shop

ice ice baby!!

That should have been Rudnik. He owes you one for sure haha

Sam got so scared when turning on the machine

Where is the master of dry ice tommyfyeah?? 😂

Hope you have small idea of the massive mess its going to make when you do underneath that car. I would put down a tarp otherwise you're going to get wax allllll over that floor.

I'm not gonna play and bassline, Roger...

You’re using dry ice on rubber. That’s how rubber gets brittle

Has anyone got their support packages jet or is it just me waiting?

With the compressor you want more cfm's, more than hp

Dry ice blasting is like 2.8 m3 of air a minute Sam, lots of air 🌬️

MO POWA BABY!!!!!

That machine seems awesome and crazy how much it could do to that part and the tyres for that price lol. I've never heard of dry ice blasting until this but wondering now how it compares to sand blasting etc but defiinitely do sand blasting outside 😅

Lazer rust removal tool next.

i really thought you ordered car parts 🤣

sick video

You are going to be on a cleaning spree for sure. You should set up a small sandblaster type box for doing small parts cleaning, so you don't get grime all over the shop. They are pretty cheap to buy.