its nice to see the trucks being worked on at a pace - instead of the ole, tear down, paint match, wrap, re-assemble cookie cutter recipe. Props to you for these vids

Jake it's time to get some BoostAuto mirrors with some paint match for the LBZ👌

Check your crash sensor on the front, being up north corrosion gets into the sensor and makes it bulge up and causes that light. Get a new sensor and it should fix it right up

It great seeing Jake take control of the video killer energy I see why ya too are like brothers

Normally the airbag light won’t set unless a connector comes loose. work at a dealership, seen it many times there are also impact sensors in the front and rear bumpers that go bad. Scan tool should give you a code, look into the code online and it should lead you to the problem

I just did the Kryptonite upper A arms, DMax Store lower arms with Kryptonite ball joints, Kryptonite sway bar end links, and new GM torsion bars. I already had changed the steering gear and idler/pitman arms along with new PPE stage 3 tie rod ends a couple years ago. Your video was pretty much spot on with one discrepancy I noticed. That was when you said to turn on the key to unlock the steering wheel. You don’t need to turn the key on because those trucks don’t have a steering wheel that locks.

Love this channel so much always staying tuned for more great content!

Loved the video, this some of the content we all (at least myself ) enjoy seeing.. Everyday, run-of-the-mill, good ole truck maintenance...... Good stuff.

Look into doing the LML hydro boost upgrade. Also look into stainless power steering lines. It’s a great upgrade to what you are already doing. PS: I’ve done everything you have with the addition of a 4.5 BDS, Kryptonite upper control arms, and dual shock hoop. 👍🏼. Keep up the great work.

Good to see you Jake! Love seeing the lbz getting some love

Airbag lite is one of the 2 sensors along the bottom of the radiator support either broken or exposed wire

I did this exact swap on my 05 LLY. the Kryptonite kit and the redhead gear box are awesome. I'm glad I went this route. Question, did you paint the idler support bracket? That thing will rust FAST, especially in the rust belt.

For me, it was a choice between Redhead and PSC. I did a ton of research, and I found quite a few guys that had lots of issues with Redhead boxes. I went with PSC, and this thing is solid. I'd highly recommend PSC gears.

the sickest sounding LBZ with that stealth 64 turbo Jake it gives me goosebumps every time I hear it on the channel 😃😃

That airbag light should be the front impact sensors, both went bad on my 05. They corrode over time. Super easy fix!

Great timing vid lol I’m about to re do my front end

This is definitely on my list of things to do to mine too! Awesome

Love my redhead feels amazing especially since my 05 had about 270xxx miles when I changed it especially paired with the kyptonite idler and pitman just need to do tie rods and all that fun Jaz yet.

Great video. I haven't had any luck with Kryptonite. I went through 2 set of ball joints, 2 pitman arms, and passenger side death grip tierods with in 2 years. They honor their warranty in replacements no problem. I have a 07 lbz, 6" lift with 35's.

Love seeing the lbz on the channel🔥🔥

When Jake takes over he keeps the content rolling to gotta love it

I did the alignment on this after it was done, for real guys, if you're driving a classic style you gotta do this to your steering! It's so tight and feels like a car instead of a sloppy truck!! It's amazing! Jake pull codes, that'll tell you which sensor needs addressed!

I know their is a sensor under the front bumper prone to cracking. The check wiring under your passenger seat for the air bag light

Thats how my lmm steering is. Have new control arms, cv axles, idler arm/ idler arm bracket, and tie rod ends

That Turbo noise 🤤

Used bluetop gearbox and love the tight steering with all kryptonite upgrades

Check the clocking spring

Check the code, my 2009 had a bad impact sensor causing an airbag light. It was a 20 minute job, sensor was in a weird spot but easy enough to replace.

Some good ol lbz content! Sometimes this is what you need! She sounds like a baaaadddd machine! Great video!

My truck had the same light. Look under the carpet on driver side where the wiring harness is. I had some corroded wires. Fixed those and the light went off. Should be a yellow and green wire twisted together.

The airbag sensors behind the front bumper

Best Chanel by far

May need to replace the clock spring, when you change the batter and the different batteries have different voltages I will mess up some of the electrical stuff

That start up though!!💪🏼💯🔥

You should do a video of taking the flares off the lbz to see how rust free it actually it is I'd live to watch that on

The airbag light 9/10 is a cracked sensor on the front bumper or wiring for the sensors

Check the sensors in the front. You can see them through the bumper. One on each side.

Jake, check the wiring behind the kick panel on the drivers side. Sometimes when I just kick that panel my air bag light shuts off.

I prefer these kinds of videos

Could you put all the parts you ordered in the description? I'd like to update my lb7

Im watching this video with my beats studios and It caught the whistle of the LBZ on point

We need more videos of bandit

to fix the airbag light, replace the front impact sensor, had the same problem on my 05GMC many moons ago.

The LBZ is lookin good bud. Great video

My truck has the airbag light on, too. I got it to turn off once by changing a blown fuse. Lasted a few weeks. Not sure why it came back on

I put red or blue top steering boxes in all my trucks. Upper and lower control arms powder coated to match the ladder bars, why not ?

Jake if you could read the code, it might be as simple as an impact sensor

Front driver side passenger crash sensor easy fix hope that helps ya

Good video with jake

What’s his wheel and tire set up on the lbz? Looks pretty dope. I have an 06 stock lbz and looking to run a similar stance that he has. Any info helps, thanks

What level kit are you using with the fox shocks

@Jake - are you running stock foglights on that truck? Have you had issues with them letting moisture or water in? If so any solutions?

So is this really a must I have a lly but not running wide wheels

Should’ve gotten the upper control arms as well

the airbag light isnt a problem with your actual airbag most likely its your crash sensor on the front

if i remember correctly its that clock spring inside the steering wheel

This isn’t just for the LBZ or Duramax’s this is good to do for people with Tahoe’s Hummers etc

Nice

Can you make a list on the mods you did, would like to do that to my lly

Get a snap on scan tool and check the bcm codes willing to bet the service air bag light is coming on from either one or both of the front impact sensors being bad.

Sensor on front of truck for the airbag light.

Can’t wait to watch this episode! 6 minutes in

The upper and lower ball joints didn’t need love? My uppers were original (133k on my 06)were shot, and I replaced everything. I used a blue top box though. I couldn’t find a PSC with a search warrant when I did mine. I love the color of the the truck Jake

get a exhaust tip for the LBZ

Amsoil easy packs. I'm telling you guys, you'll never use anything else to fill a diff once you try those. So much easier than the hand pumps, It takes longer to cut the cap open and pop the seal than it does to squeeze a quart of fluid in!

I have one question. Why work on the ground if the truck is on a lift? Raise that thing up and stand up to work. You can move a lot faster if you do that.

Bro😍😍😍

Are you getting that duramax ready to handle 4wd launches or what

Air bag light might be the airbag clock spring. I just changed mine and my LBZ and my airbag light went off.

Whats the lift/fitment on this truck? Looking to do the same for my cateye

Still waiting for a complete parts list for the steering on 8ball…

Looks like you need a fancy $800 steering wheel now my good sir

2:11 dude Maryland did the same

Any reason why you won’t mention the wheel and tire size?

You should strip the frame and paint it

Hey the air bag light is most likely one of the sensors in the front of the truck behind the bumper probably Corded

Right on jake keep up the good work you are getting pretty good with the vlog responsibilities 👌

I just bent the rear axle on my 98 ram 1500 😆

Jake your LBZ is so dope

What color is that LBZ?

Forgot your ball joints/upper control arms daddy

I wonder if the service the airbag on your dash has anything to do with the light being on. Hopefully it's a simple fix

I would just like to say for such truck enthuzst you guys are and me lol, and your using valvoline oil and fram thats bottom of the barrel. I still like the trucks though😉

This the earliest I’ve ever been

what size wheels??

How much was all the parts in total with tax?

Change the sensor behind bumper

Whats the wheel and tire set up on that beauty?

psc big bore box and be done with ut

change airbag sensor under radiator

It's a sensor under the passenger seat mine is 160 dollars at autozone

I thought a 727 was flying pass in the beginning 😆

What kind of radio is that

3

Blue top steering box > red head all day

First how u doing

2nd lol how’s everyone doing?

You should get rid of the 2006 truck and gmc jack

I always here bad things about red head for these

3rd how ya been