Truck is shown at 19:10. You're welcome :D

The front ends on the trucks just keep getting uglier and uglier.

Sorry, but the frame test was complete BS. The bending moments were distributed over 8 points on the frame only about a 1ft away from the pickup points. 60klbs is 15klbs per pickup point, spread over a 2ft section, that's a 7.5k ft/lb bending moment for each of the 8 cable points.

They legit took a concept version from about 6 or 7 years ago and made it into that exact truck.

This video makes me want to never purchase a ford product ever again this was almost torture to watch and listen to

Hasn't Chevy been using a full boxed frame for the last 4 years

Super doody.

Ford should be ashamed of themselves. This is a ridiculously long ad. It's like an infomercial.

Whats the truck called again I forget??

Sticking with my 97' F-250 7.3l ....not spending $60+ on a truck. That's insane.

Needs a bigger grill and more chrome.

Just curious, but does it have a "bare metal chassis" that is going to rust in the first few months like my 2015 F-350?

Anybody notice that this is a 2017 truck?? its not even 2016 yet!!

I'm a Ford guy through and through. But NO Super Duty will ever come close to the 7.3. That's the toughest, smartest, and most capable Super Duty ever.

I was wondering g if you guys could do a review on the 550

Is there an option for the camo to come with it?

Can someone give me the exact minute where the ford is shown? I'm just too busy too watch a 20min video.

Am I the only one who genuinely likes the new look? It seems every time something new comes out, people always hate hate hate and sometimes it's understandable. This time it isn't. I like it. :)

but can it pull the space shuttle?

I have to say they have come up with some nice stuff for the 2017 but some of the things i would like to hear is what they are doing for the salt that we see up here in the north in the winter. My 350 looked great on top but it was very bad under and over the wheel wells alot of rot even rinsing it under.they boxed the frame like gm so i would assume no more body flexing.

My addblocker didnt block this one :/

why does everyone hate on ford so much? sales dont lie guys,

whats the song at the end when they brought out the truck?

Wow that's a powerful hoist, and some darn good cables too.

21 minute video about the unveiling of a truck. Only first appears after 19+ minutes smh

That crane stunt was a total joke, there would be such minimal force distributed on the frame at the top by the way its secured to the crane lines, the crane is the only member taking any substantial force.

does it still knock in regen?

it's all great and stuff ,but tell us how your going to keep the spark plugs from blowing out at 30-60 thousand miles ..

All these Chevy guys are just jelly ;)

And the US EPA are going to fine VW for emissions LOL

In the frame twister it cant open its tailgate

Sorry for asking a stupid question, but why is it announced as 2017? is this not meant to be markeded for next year?

I prefer cummins...

this vid is counter-productive

So, can I cut the body around the wheels and put 46" on it? Will the gearbox, drive-train, and axles handle it, like Dodge does?

does it come in a Manuel

They sure put a lot of effort into making the grille as ugly and giant s possible. Good job!

why? these full sized American trucks look ugly as hell now. Rn only trucks I'd buy are a Tundra or a Colorado. Like seriously where do they come up with these designs?

so is ford still going to use powerstroke in 2017?

I agree the crane test is a pile of my super duty in the mornings. The forces go directly to the cranes cables and to the crane structure NOT the truck frame at all.

Best selling = lowest price. Most sold = shortest lifespan. I wonder what MT is getting from Ford to show this commercial on its channel. I'd take a free work truck for showing a commercial, even if it was a Ford. From a fleet mechanic who's replace three 6.7 Powerstroke engines just out of warranty, that should mean something. Styling by Michael Bay isn't helping, either.

the most expensive super duty ever

I know from personal experience on a 99 f250 super duty v10 almost no scheduled maintenance and we hit 300k already. Sure it burns a little oil from neglected oil changes but still runs strong everyday never stranded. Transmission fluid has never been changed ethier. The 99 is reliability.

I seen them testing one in black drab on i-10 a few months back.

bring back the excursion. bring back the excursion. bring back the excursion. bring back the excursion. get the point? bring back the king of suvs.

Built Ford Cheap.

So how did this end up on MT channel?

As for someone who drives both GM and Ford trucks daily. Dodge here and there. I say this new F-series is going to be a big hit. The interior looks so much better btw. Thank you ford! No more plastic look!

ford. First on race day

Pfffft. My jeep Wrangler could outperform this. Mopar for life!

We just got one we pick it up Tuesday can't wait

10:00 Sorry to say but that frame is not experiencing much bending moment, there is no lever arm between the cables from the top of the crane and the cables hanging down the frame.

I love fords and all but damn, that truck is ugly as fuck lol

All that weights was hooked up th the same spot where crane cable is lifting the frame so that is not gonna give stress to the test frame as much as you think. It doesn't really matter other than show. Another thing or a question is after all that futures loaded super duty is gonna cost $80k instead $70k now like they did with the f150 trucks. I have 2013 f150 limited price was almost $55 k I priced new platinum sticker on the truck was almost $67 k. It just crazy.

I love the way these 2017's sit. first new truck bodystyle that grew on me instantly.

Waiting forever for the unveiling

My '08 Chevy has a fully boxed frame, Ford really getting with the times here, really innovative!

Huge thumbs up 👍🏻 What a great job Ford 💙

How many times was "Super Duty" said in this video? O_O

I use my Super Duty as a daily driver!! LoL : ) It really has motivated me to get my boat repaired!

It had a thumbs up until the gimmick with the crane, can someone explain how that tests the frame.?

And what about the power joke engine How have they fixed it

So who at Ford thought it would be a good idea to make this video 20 minutes of technical information and then give us NOT ONE SINGLE SECOND of detailed, close-up footage of what the actual freakin' trucks look like?!?! All they did was pull a bunch of trucks into the frame and then end the damn video. Brilliant idea guys.

ok... if you notice when doing the weight test with multiple trucks the anchor point on the frame is aligned with the anchor points of the cables attached to the crane. Therefore as long as the anchor points are stable there will be no bending of the frame. A better test for frame resistance to bending would be to suspend the trucks from the center of the frame. I doubt it could support a single truck without visible stress bending.

when is ultimate adventure 2015 coming out

I'm more impressed with how easily the crane can lift all of that :D

gunna have to get me one of those

all I wanted to know from this video was if the new super duty would keep its solid front axle. Its one of the very few, if the only, pick up trucks built that still has one standard.

It was smart to take the wt savings and put into beefing up other areas. Nice!

The 2017 front end on the 2015 F-250 would look perfect. I personally like this front end a lot but the old emblems and mirrors would look good with it.

It looks great!

EL MEJOR PROYECTO DE MARKETING!!!! FELICIDADES FORD.

This felt like I was watching ESPN

Damn. I'm a Chevy guy, although I like all 3 brands honestly, but this is pretty badass. The cameras and trailer camera is badass

And what the hell did that frame test prove, the top shackles were directly above the bottom shackles. Of course the frame did not bend the rigging system did not allow for it.

so, put toughness strength and most capable together to get TSM i have TSM in my honda.

Cool, but does it death wobble?

Someone needs to count how many times "Toughest, Smartest, and most capable" was said.

2017?? Great Scott!

i have a 2008 6.4L Diesel F250... i love the look of it... but i should paint it yellow... cause its a lemon and always breaks down... not sure what truck i should buy next.... maybe a dodge?

Didn't realize you guys had infomercials on this channel.

So this is just a 20 min ad?

Did he say Racing?

Why reupload?

I wouldn't mind being a Tester for Ford or even an Automotive Technician for them, tried all the Ford Garages within 30 miles and also Volkswagen and Peugeot and Audi and got nothing out of my CV's, I have tried 61 places with CV's and applications to all sorts of companies, been trying since December, completed my City & Guilds Automotive Level 2 Diploma at Grade Merit in June. I also have another 10-14 qualifications that I have achieved over the years.

The 6.7 power stroke is where it's at and the 7.3

Good looking truck.

i have 1995 f-250 5.8 winsder and it still kick ass

Yeah, one frame can support 9 trucks... with the cables of the crane fixed almost at the same spot as the weight. Well done... ¬¬

I LOVE ROADKILL. Keep up the good work guys From THE LAND DOWN UNDER.... AUSTRALIA MATE

why do I feel like I'm watching the NFL half time show

I live in Brooklyn so I need this (potholes)

Nice truck for sure

Driving through 6 inches of water is an extreme condition?

I'm a automotive enthusiast that can find beauty in anything on wheels. I tend to lean towards GM trucks tho(own a 2014 Silverado). I have taken a liking to the Super Dutys when the 08 6.4 trucks hit the streets and really like the 2011- 6.7 trucks a lot. If I was looking to buy a heavy duty truck(which I will be in a few years) there is a few things I MUST have. It must have solid axles, it must have a locking rear diff, it must have at least 400hp 700tq, it must sit tall, it must look good and it has to have a strong aftermarket cause I like to lift and mod my trucks. I can honestly say the GM's would prob be my last consideration in the HD market. I really like the looks of this truck but can it back up the hype? We will see!! I can't wait to see one of these new ford Super Dutys lifted 6+ inches on at least 37s.

no wonder it the from can take all that weight look at where the load is suspended from its about a foot away and its on both sides of the so you may as well take the frame out of the test. have it only joined to the crane only from the very centre and have the weights load onto the outermost edges and then let's see it carry all that weight then I'll be impressed.

Hey you have a good idea for the best way to get the best regards to the best way for a few days to see the status on this one 250ford hev

Why is Mike not hosting this?

They definitely could have gone a better walk around view of exterior and interior. I really only seen brief images and rarely the whole side at once! But this is a Release!!!

I think the frame test would have shown more if they hadn't hung the trucks from the point that was so close to where the crane was attached