Excellent video. Thank you very much. I received my new DS2 after using a Dreamstation 1 for 5 years. I was plesantly surprised by the performance of the Dreamstation 2. The design of the reservoir and the fact that you can't open the reservoir without removing it is a big step backwards. Other than that it's ok. Wish they had just sent out Dreamstation 1 replacements without the foam though.

I like the Dreamstation 1. On Dreamstation 2, every breath you take can be heard, the air coming in through the filter holes is not quiet. I like viewing the graph on version 1 to see how much rest that I got when I shut it off. No pre-heat function on version 2. Although it looks nicer, it’s not an upgrade in my opinion! I was forced to take this one due to the recall on the older one. I’m not very happy with this one. Resmed Airsense 10 would be a better choice, outside of the Dreamstation 1.

I just received this device due to the Phillips recall. I found your video very helpful in terms of the options available while using it. I have been using it now for a few weeks with pretty good results. Setting-up the Bluetooth was a bit of an issue, as the instructions to add the information on the card from the older device, didn’t transfer to DreamMapper. The DreamMapper will only use certain masks to record the data, so I have had to try several to find something I am comfortable with. That has been a good thing as I just watched your other video about discontinued masks. I have been wearing the same mask brand/style for 20 years, and it’s now history. My device came with the smaller heated tubing, and found I needed to increase the pressure to make it feel consistent with what I was experiencing before. Thank you for the information as it’s good to know a place where I can get answers quickly.

As others stated, this was a replacement for the recalled DS1. As Phillips did not include a manual, this video answered every question I had. thanks so much

1) It's a fingerprint magnet 2) Can't use it without the bulky reservoir, not travel-friendly 3) Can't open the reservoir without removing it (you also noticed it) 4) Can't re-orient the air port 5) Can't take the SD card out without removing the reservoir 6) More complicated reservoir which is harder to clean 7) Humidifier latch is based on flexing plastic, will crack and snap off at some point 8) Modem cannot be removed / disabled Summary: cost optimized design intended for growth markets (developing economies a.k.a. the third world), not the US or Europe in particular

Will be gettingDreamStation2 delivered tomorrow, as a replacement for recalled DreamStation1. Fantastic presentation and thank you excellent presentation. I think I will like this updated model.

Loved your video. I have a dream station 2 and somehow the option to change the PSI disappeared, and went down to 5, when I needed 10 PSI. I was thrilled that I could find in your video how to change the setting, I didn't have to bring my machine into town to my lung Dr and have him change the PSI back up.. I was happy that I could fix it, and not to have to call my daughter to fix it. Thank you for your video.

Easier for m husband to use than the old one. The video was very helpful and easy to follow. Thanks 👍🏼

Thank You! I just got mine because of the recall and I was dreading reading the directions. You made it pleasurable. Good Job!

My first CPap! Right on time🙂 It's super quiet. Still getting to know it.

I have been sleeping with a cpap since 2001. My Dream Station is now on a recall, I'm getting my new Dream Station 2 tomorrow... can't wait

have watched you videos on the dream station 2 and every time i watch them find more information , thank you

I have one of these machines and am brand new to CPAP. Never thought I could tolerate one. At the hospital during an overnight titration test, I felt like I was being waterboarded with air, like I was drowning in it. Thanks to the ramp settings, that is over. Just had my first night with it and went smoothly. My AHI was super low whereas before it was very high, so I guess it's working. Soooo quiet. Wife is delighted. Of the reviews I watched, yours is quite good at explaining various elements. Thanks for that. Was looking for that Flex setting info. Man, the comments are unkind but much of 'em seem very nitpicky. How hard is it to pull out the reservoir? Seemed awfully easy to me but maybe if someone is laden with arthritis it would be a concern. I had no trouble and can put a 16oz bottle of distilled water in the nightstand drawer. The small size means I can take it with me for work travel. Anyway, I just needed a good starter machine and, since I just got thru my first night with success, I'm quite pleased to say the least.

Very valuable info, well presented. I appreciate the DreamStation 2 much more after watching your presentation. I agree with the comments that say the unit seems kind of cheaply made. As you mentioned, it would be easy to break off a plastic tab trying to open the reservoir without detaching it. Even the latch on the reservoir lid seems almost designed to be broken.

Terrific video to help me get started w/Dream Station 2. I have had the Dream Station before, and the instructions I got for DS 2 were lacking, like how to take off and wash the tank. Thanks for the great instructions!

Just got mine this week due to the recall. So far it works ok. I like the sleek look but I didn't mind the medical equipment look of the first model, because it is a medical device. Takes up less room on my nightstand. The replacement filters I bought are now useless and the new ones are more expensive. I liked the previous removable water tank. This one is kind of a pain to remove and install. It feels fragile, I'm concerned I'll break it. The touchscreen is somewhat frustrating to use but once you have it set up it's not an issue. It doesn't really matter if I like this one better or not as long as it works.

Thanks for your video on the Dreamstation 2 how to set it up. I was having a problem with the water chamber connection trying not to spill the water as I attached it back to the base. Whew...I finally got the hang of it and easy peasy. My 1st Dreamstation started to lose air flow pressure so I had to get a new one. I agree that this model is lighter, less space, & quiet. Being able to view this video is better for me to see than the booklet, hands on works better. Thanks again.

I prefer the Dreamstation 1 (DS1). The humidifier tank design is harder to use on the DS2. Harder to get out and more flimsy. Overall the DS2 appears to be more cheaply made. The tube connection angle is fixed. It could be rotated on the DS1. The button is harder to press from your sleeping position. Sometimes it spits water out through the tube (when you fill it up to the line). It often runs out of water by morning (The DS1 also has this problem). It is a little quieter than the DS1. But overall I like the DS1 better. Looks like they rushed the design of the DS2.

Just set mine up as a replacement to my Cancerstation 1. Seems like a pretty decent machine.

Just received my new DreamStation 2 as part of the recall. I was pleased that it came more quickly than I anticipated. Thanks for the helpful video. I t was very helpful getting the unit set up. I look forward to future videos.

Thank you for a very informative video, much more useful than what Philips provides. We just received my husband's recall replacement DS2 a few days ago and have been working through all the instructions etc in order to try it out for the first time tonight. I understand the chief complaint of so many people about the inconvenient humidifier, but am hopeful we can live with that. However, I am wondering about a couple of things related to cleaning the machine, which is my part of the operation. Someone asked about how to clean (or should we be concerned about) the passageway that runs back through the machine from the humidifier to the air outlet port for the tubing. It is indeed much longer than the "passage" on the original Dreamstation. Is there any better answer than "well, if you just clean all the rest of the machine daily as Philips recommends you won't have a problem"? Frankly, we never cleaned the old DS humidifier daily, just weekly with vinegar and distilled water, and never had a problem. I am willing to wash the darn humidifier every day or every other day if necessary. However, this longer passageway does concern me. Any thoughts? Also, the Philips instructions just tell you to wipe off the "humidifier air inlet/outlet seal" daily with a cloth dampened with a little mild cleaning solution. I've tried that already and it's pretty hard to get into the nooks and crannies of that seal while it's in place, so I'm a little worried about how sanitary it will be. I saw one other review on the internet that mentioned removing it to wash but it didn't show how to remove. Do you have any insight on whether this is possible or a good idea? Thanks again for this video, and any thoughts about my questions.

I just used my new DreamStation 2 last night. At first, I thought I wasn't getting as much airflow as I'm used to having and not knowing how to adjust it, I just left all the settings as is. I really did not notice any difference between this and the other DreamStation that was recalled. I see what you mean about the reservoir being a pain to handle vs. the other one. But I like that it takes up less space and the tote bag is smaller and the whole thing lighter and so I prefer that.

I received my DreamStation 2 as a replacement by my doctor after the recall of the DS1. Two issues I have found. 1. The water tank is smaller and starting the first night, on humidifier setting 3, the default, it ran out of water. On the DS1, level 5, I never ran out of water before I awoke. 2. There is no longer a pre-heat feature which very handy in the winter months. As for your comment about ramp settings not available on the DS1, there was access in the advanced settings. Now, on the first DS1, you enter advanced settings on the basic menu. On my second DS1 they removed the advanced menu access. However, I eventually figured out how to get into the advanced menu on the newer edition. As a side note, it only took me 1 minute to get into the advanced settings of the DS2.

I just received my replacement CPAP DreamStation 2 today. The video was very helpful.

Basically the Dream Station 2 (black) CPAP Machine is just a cheap made model Phillips is replacing the white Dream Station 1 models with to alleviate judgments against them. The Dream Station 1 machine was robust and hearty and one didn't have to worry about it falling off your bedside table at night. It held a full nights water reserve and had a swivel attached from Phillips. The air volume could be set up to 16 for large and needy people. It was easy to fill and clean. The Dream Station 1 seems to be far superior to the new model but has the toxic foam problem. Here are some of my first impressions of getting the new Dream Station 2 that this commentator is making good comments about. Different people have different needs and wants so really think this over before making your choice. And I hadn't fired the Dream Station 2 before writing the following comments: The biggest problem they did not state is that Phillips new replacement machine, i.e. Dream Station 2, is a much cheaper made machine and any filters and etc. you have will not fit on the new machine. The hoses are smaller diameter and will not be sufficient for large people. The water tank is smaller, so requires frequent filling. There is no swivel fitting so your hose goes straight out, instead of being able to swivel towards your bed. The machine is all black and difficult for us elderly to see in the night. A couple of the hoses and attachments did not come with the new machine.

Thank you. I would be very interested to know how many hours of usage is it until the "reached capacity hours alert/warning indicator comes on? Thank you for the video. I received my DreamStation 2 yesterday and became overwhelmed at trying to set it up. You made it soooo easy. Cannot thank you enough. I almost got frustrated and sent it back. Sooooooo glad I found this video. Having to disassemble the machine to fill up the chamber does not make sense as the little pins in the back are so small and I'm thinking got to be extremely cautious when removing the water chamber and replacing it.

I got mine last week i have no problems cus i don't use the humidifier never like it I have a humidifier in my room People scaring people every machine the comes out they open online risking peoples life So people stop using the dream station 2 health is important Use ur machine people thanks for ur review people should listen to you

Thank you so much for sharing the new Respironics Dream Station 2 I just received my new device because my precious device was recalled. It tool awhile to receive it but I'm glad it's finally here. Your video is so informative and I wouldn't have known how to navigate it as quickly as I did without your help. I've been using the Dream Station 1 for 5 years and was experiencing some serious issues after using it for 3 yrs. I had upper respiratory infections and eye infections from using my old CPAP. I'm hopeful that this new one will be much better. I am part of a class action lawsuit but I'm not really wanting to proceed with it if this machine works. I will get it set up today and I thank you for your video. I feel more confident about setting it up now. It does seem much easier than the Dream Station 1.

I recently received my replacement DreamStation 2. I am quite impressed with the new design and features. My question is what is the advantage of the heated tubing over the regular tubing. Thanks for your informative video.

Thank you so much for a wonderful video. I just got my new DS2 today and have it set up thanks to you. Will be anxious to try it and compare to DS1. One thing I’m not happy about already is the water reservoir..very awkward and inconvenient.. read out is very techy…could have been a larger format for us older folks… touch screen not great for big fingers and older people. But I will give it a try and hope for the best.

Just got mine today. I'm so ready to get a good night sleep

Finally after two year recall I got this device March 2023. I've been having a hard time with it, like someone mentioned, I felt overwhelmed with air, to the point I couldn't breath, then in the middle of the night the machine was pumping water all over the place and was making this awful air pressure noise. I truly miss the dream station1. Hopefully your tips will help me to get to the bottom of the issues. BTW, this DS2 came without the heated tubing, and that has been another therapy nightmare for me. I guess I will survive!

Received my DreamStation 2 a few weeks ago. I like the fact that it is smaller and quieter. But...there are a few flaws in its design. The water chamber is a pain in the ass...First of all, it is smaller and after about 7 hours of sleep, it's empty. Filling the chamber is alleyways a mess as water spills always. My biggest disappointment is that with this new machine, I can't use my SoClean (unless there is a way and I haven't figured it out). The previous DreamStation, had the water chamber just below the hose attachment, so the adapter for the SoClean with its small hose could fit right in and do its job, every morning....Now...there is no way that I can see, for the SoClean to be hooked up. Anyway...not really thrilled with it but it works I suppose. Roberto

Thanks for the video, very helpful. I just got this replacement for my partner. It's my responsibility to set it up. I love the way it looks and the size is great, but filling it with water is a little infuriating (I need to turn on the bright lights and throw on a pair of reading glasses). Yours seems very quiet. Ours is very loud, much louder than the old one.

I received a Dreamstation 2 in the recall process of my original machine. Some of the features you show are not turned on (in my unit). Glad I watched. I just tried to capture my first report (90days) for DOT purposes. Data is not showing that far back, and SD card shows corrupt when using the recommended reader. I am getting the run around from Phillips.

Thanks for the walkthrough of the DS2. Just got mine as the Philips recall solution of the defective DS1 finally arrived.

Any recommendations for cleaning. You mentioned in the video top shelf dishwasher safe?

The system one was designed much better! What were they thinking??? The filters are INSIDE so now there will be dust build up at the intake holes. The touch screen is HORRIBLE, not very responsive at all. Humidifier design is awful, and the machine can’t be operated without it. The tubing connection is on the front and fixed in place unlike the system one which was on top and swiveled. I’m very disappointed

Very unhappy with the DS2, as it is not nearly the machine the DS1 is. Glad that I followed the foam removal instructions on KZfaq about 7 months ago, so I could continue using my DS1. After waiting for just over a year for a new one to arrive, a DS2 came. I have tried it & I am going to sell the DS2 on Craigslist. I won't be sending my old DS1 back to Phillips, as they inconvenienced me & Phillips Respironics jeopardized my health by making me wait an unacceptable length of time for a replacement.

Thanks for the video. The set up info Philips provided was not complete. Your video cleared up my issues. I too do not like the water tank set up. There is no way to check if the tank is empty . And it is easy to spill water ( on my nice wood night stand). I have never had water problems with 3 other CPAP machines. I do like that the water tank can be washed top rack in a dishwasher........

Nice video. However, with the air passing through the machine from the reservoir, how do you clean the air passageway from the reservoir to the tube attachment site on the front of the machine?

Hi CPAPmw - can u tell me where the air intake area is (I know where the filters are but how does the air get in to the filters?)- it did not seem obvious in your video? Is there another filter on the air intake area also? What new material are they now using for sound abatement material, especially considering it appears much quieter?

Really helpful for first time user. Thanks so much!

Great presentation. I just got my DS2 due to the recall. I don't really use the humidifier but it was good to see how this machine assembles. Here's hoping for good night's sleep.

I'll wait for the new ResMed to come out! Anyone know when?

Informative video. Can you use SoClean with the Dreamstation 2 and if so how do you hook it up?

After 18 years of C-PAPS, I can actually sleep at night due to how quiet it is. No rushing air sounds. None!

You are correct, best cpap I've ever owned. Have been through about 5 over the years and use them every night and this is my favorite. It's the lightest and quietest. Great demo

Looks like a cheap piece of junk. Also, the touchscreen does not look very responsive. Another big problem, if you opt not to use the humidifier, you still have the footprint of the humidifier making your machine unnecessarily larger. Other than the removal of toxic foam, this looks like a downgrade on DS1.🤨

Fear that it is so light that it could be easily knocked off the nightstand.

The only thing I don’t like is that if you don’t use the humidifier, you can’t omit the tank and enjoy the benefit of having a much smaller unit on the nightstand and also the ease of traveling….or am I missing something? Will it work without the tank attached?

Very happy I didn't wait for Philips to replace my DS 1 or old System One and went with a ResMed Airsense 10 Autoset instead. The Airsense humidifier is much easier to handle, the machine is quieter than even my System One (I'm VERY sensitive to noise) and I never got better numbers. You didn't mention that the DS 2 data is encrypted. I've been on CPAP 12 years and took charge of my own therapy (with my doctor) and having access to full data via the Oscar app is essential for me. The DS 2's data being encrypted prevents that. For me that made it a non starter. Glad the machine is quiet. I had tried to replace my aging System One in 2019 with a DS 1 I purchased out of pocket and tried to use it for 6 weeks but I could not get used to the loud motor whine (even having the supplier replace the first unit I got with another one that was even noisier than the first) so I went back to my 10 years old Remstar System One. So I was already frustrated with Philips before the recall. And now they come back with a DS 1 successor that's clearly a huge step back in several respect: humidifier is harder to handle and fill and harder to clean, hard to use controls that most other videos mention, hose connector awkwardly placed and with no swivel or any adjustment and last but not least, the encrypted data). Others also mention the casing is easy to scratch, shows fingerprints very easily and feels cheaply made. My nealrly 12 years old System One still looks new. My DS1 too and other than the noise (and foam!) it was a great machine. So I'm happy I got the ResMed instead. Fantastic machine in all respects. Personally, I'm done with Philips.

Clear and concise. Great job!

Your video helped me a great deal. I’m setting up my new machine today. Thanks so much.

Thanks for telling about the temp setting for the tube. Great presentation!

I don't need the humidifier. i liked the dream station 1 better because you can use it without the water chamber. (much smaller then). I also don't like that the new machine display faces the ceiling. I now must tilt it to see from bed.

I was just informed today that that is what I am getting to replace my Dreamstation that is being recalled. A little nervous about it but I'm sure once I get used to it that all will be well! Thanks for the video!

I like the review. Some of things i wish you would have covered were how to change the settings without a provider and also if you recommend it over the old dream station. The reason for this is some people don’t have insurance and fixed there apnea on there own. For me it took trial and error with mask and pressure. Also diligence to get used to it but since someone taught me how to change the settings on my own my api is down to a .8 when it was 17.

Excellent Presentation!!!

Thanks, much more informative than the video that the company recommends!

Just got my replacement yesterday, have not used it yet, wanted to watch some videos before setting it up and using it, Thanks for this one. My first out of the box impression is the humidifier is going to be a big pain in the butt. I use my cpap an average of 8 hours a night with the humidifier on the highest setting, 5, to somewhat avoid cottonmouth (I use full face). As such I always need to top it off in the middle of the night when I get up to go to the bathroom or it will run dry. That's not good, the smell of warming plastic stinks, pun intended. with my original dreamstation the refill is easy and can be done with one hand while half asleep. My other complaint is the location of the info screen, I could always read the original while still laying in bed. When I wake from time to time I like to see what pressure I am getting, a simple press of the big knob gave me that info, could also adjust settings while laying in bed as needed so I didn't wake fully because of physically getting out of bed. As a few others have said, I see this unit as a big step backwards, while it may "look" nicer to some, I personally care more about being user friendly than how it looks, and without even using it yet, it appears it isn't. On another note, I'm hoping I can simply pop the SD card out of the original and use it in the new one, no real info on that here. Thanks again for the video, now off to watch some others.

The video is very well done...the Dreamstation 2 not so much. Got it courtesy of the recall. Humidifier is very difficult for someone with tremors. Adjustments for airflow are problematic, but better now thanks to your video. Screen is ridiculously difficult to read and the DS2 has no portability whatsoever. I'm dumping the Dreamstation 2 and getting a ResMed AirSense 10 or 11.

Received my recall unit. It worked for 2 days at one hour and 49 minutes each night. Will not power up. Have to call Philipps with the unit near a phone to walk me through the solution. Man was not meant to sleep with a mask on. Receiving this defective " new and improved " unit solidifies my reason for disliking cpap machines.

Just got my DS2, biggest complaint is how loud it gets on inhalation. Much louder than DS1 I believe. Everything else is okay, the humidifier really was absolutely terribly thought out. Such a pain in the arse to take it off and fill it up.

You make a clear and pleasant info video . Thanks

Thanks for the information on the Dreams 2 auto Advance Cpap. Never knew about the green Filter to go inside the grey filter. Thanks for the video. Juanita Holloman

GREAT VIDEO...MACHINE LOOKS AND WORKS NICELY

It’s very quiet. I live in the north so it’s cold no dry. So the heated tube with humidity is awesome. I did notice the touch screen doesn’t always work so I have to unplug and the plug it back in to work.

Very useful as I'm waiting for a replacement since the dreamstation was recalled back in june and still havent gotten a replacement yet

Great video for me to get started with my new DS2. But if you haven't already, can you do a video that explores the Settings in more detail & why you might want to adjust them.

One thing that is a pain in the butt on this thing is you have to make sure you pour the water on one side or the other not in the center or else at it’ll end over your counter.

I received mine from the recall. Your video is nice. Thank you for doing it. The machine is not good. I can’t just add water from the top. I have to remove the humidifier, then open a top that completely detaches, and then put everything back together. Just inconvenient. The black color is probably intentional so we don’t see the black pieces of insulation falling apart like we could see on the white previous model. The tube on the front don’t swivel like the previous. It is stuck facing forward. Another inconvenience. It does not feel like having the same pressure. I will have to buff it up. The humidifier is also very small. Won’t allow 10 hrs of sleep on the weekends. So far, I don’t like it.

How long is the wait time to receive the new machine . I registered my machine in July, 2021. I stopped using the old recalled machine last week . I was getting sick, several sinus infections. Thank you the video was informative .

Thank you so much for the excellent, informative video! You answered all of my questions!

I travel extensively and don't use the water chamber or heater. Is there a way to remove the tank from my unit to reduce the footprint? If I take the water tank off it just blows out the back side. The last CPAP would operate without the water tank attached thus making it more compact and easily transportable. Other than lighter weight my old unit had a smaller footprint.

great video. It would of been nice if the manufacture would of sent me a CD as I am a visual learner. I just got my replacement now dream station 2, not as bulky and heavy as my last one. Easy to operate and light weight.

Some CPAP channels are not liking this new model. We need a comparison study of the Dream 1 VS the new 2.

I’ll probably end up buying this sleep apnea machine it’s cheaper then the other ones I’m seeing and it’s small so it’s not a hassle to take travelling or things like that.

The explanation of how to operate is wholesome but I’m a little bit frustrated is about how to fill the water in the container. You have to remove all the the container out before you can remove the cover unlike my old dreamstation2. And the attachment hose cannot swivel anymore.

can the dream station 2 advanced be run without attaching the water tank, also, my SD card from dream station 1 does not seem to fit in the 2 advanced model, by that I mean, when it is inserted in 2 model, it does not seem to stop but continues to go in more than it should and than can hardly be removed

Wow that humidifier setup is goofy. Have the Dreamstation and it's so simple to fill.

The new knock down water tank is way more complicated to take apart and put together.

Is there a short demo video on how to pack the dream station 2 into the carry case?

I haven't used it yet. I have to set it up but what I have read is that it is loud to use while sleeping with the breathing. So that would interfere with "sleep".

Can you do a video on how to package and send your old clap back to the company

What I do when the CPAP machine is switched on and "service required" immediately appears and the machine stops functioning?

The humidifier lid has a gap which is used to open the lid. It is nearly impossible to clean, leading way for mold contamination. Black mold in the lungs is nearly impossible to cure.

On my Dreamstation 1, I would remove the back, attach my hose and turn it on to dry my washed hose quickly. I also liked when traveling that I could leave the tank and just carry the smaller portion of the unit when tight on space. Can I do either of these with this newer unit? Thank you for your videos and help. Must appreciated.

regarding your question of why water chamber, will not allow fill, must remove to fully open. answer: manufacturer liability safeguard. Why because the odds of pouring water in to electrical, area is decreasing these odds.

Great video, thanks so much! Would love to see a video, or add to the current one, about proper cleaning. Is vinegar and water no longer the preferred cleaning method?

Thank you. This was great information. I just got mine today. Question: is there a new app for this machine? Or will it sync to the current app I’m using?

Is a So Clean machine compatible with the Dream Station 2? If so, how is it connected? I found your demonstration of the new C-Pap very helpful. Thank you!

Just got mine yesterday! Small!

How do you correct the "adjust fit"?

Is SoClean compatible with Dreamstation 2?

I had a recall on my old CPAP machine that I never could adapt to. Philips replaced it with a DreamStation 2. I have never used it. My question: I want to sell the DreamStation 2 unit and would like to know what would be a reasonable asking price. Thank you for your informative video.

If you don't want to use the water can just use it without the back portion like the old dreamstation. The old one has a detachable humidifier so you can use it with or without the whole detachable back portion. Is it the same with dreamstation 2?

I use an oxygen concentrator, which is attached to the tubing by a small insert, so the oxygen tube can be popped on. How can I use the new tubing, which plugs in where that insert currently goes? Also, thanks for showing where the SD card slot is. That & where & how the power cord plugs in were the two things that originally stumped me. Got it all set up now, yay!

Two questions: can the humidifier bw turned off? Can the the machine be set to turn off automatically? Thanks for your reply

i Just got my replacement Dream Station 2. The tubing end that goes into my machine is different than the one i had before. When medical supplies calls for my order will they know which tubing to send me. Also do i need to register my new machine if so where would i go to register it. I found watching this video very helpful,