ScanNCut 10 Things I Wish I Knew Starting Out- Allbrands After Hours

Рет қаралды 23,007

Жыл бұрын

Join Courtney Douthat as she shares the ten things she wish she knew when she was just starting with the Brother ScanNCut.
See products shown: www.allbrands.com/categories/...
Canvas Workspace: canvasworkspace.brother.com/en
#brothersews #scanncut #brotherscanncut #allbrandsafterhours

Пікірлер: 74

@kimimel7488 4 ай бұрын

Mind blown on the fussy cutting!

@bonwithoutice 6 ай бұрын

OMG number 3 and 7 are awesome, specially when you are learning. The 10th was mindblowing. Thanks so much for sharing your knowledge!

@lauriepanariello574 Ай бұрын

thank you for these videos, I just bought a ScanNCut, so I'm very new, but I feel more confident I can do some good work with it now!

@maryharvey724 11 ай бұрын

Wonderful features you have highlighted.

@spoon9001 6 ай бұрын

Holy crap. My mom talked me in to buying a ScanNCut but I'm not a quilter or a scrapbooker so I wasn't sure I'd make good use of it, because I [struggle to] make doll clothes. Thank you for your demonstrations and tips. I now know how I can apply this machine!

@karenschluter2749 11 ай бұрын

These are wonderful tips, thanks so much.

@kathyann7153 3 ай бұрын

Thanks Courtney I'm a little behind on some of your shows but I love them and I share them with my took children. My son really loves his scanning cut

@flnurse Жыл бұрын

I always learn something new from you. Love your videos!

@allbrands1976 Жыл бұрын

Thanks for watching!

@beverlyakins2374 Жыл бұрын

Great video just catching up before I unbox my scan and cut

@allbrands1976 Жыл бұрын

Hi Beverly. You're going to be a pro at the rate you're going :) - Courtney

@bjatnip3217 Жыл бұрын

Thank you for your time to teach us, I tell everyone to watch your videos to learn more about scan and cut machine

@allbrands1976 Жыл бұрын

my pleasure!

@theuktoday4233 2 ай бұрын

Really useful video as I havent used my scan and cut since I bought it about 18 months ago!

@robinsankbeil3017 Жыл бұрын

You are so delightful and your sense of humor makes me laugh. All the knowledge you and your sisinlaw share is amazing. I’m in PA, but if you were local, oh yes, my sewing crafty friends and I would be there. Lol! Keep the scan cut videos coming! Personally I liked this video and also like your projects. You make everything look easy! 😁

@allbrands1976 Жыл бұрын

Oh thank you!

@bethserran Жыл бұрын

Thank you, Courtney!!

@allbrands1976 Жыл бұрын

Hi Beth. Thank you for watching. - Courtney

@sewfabulous101 Жыл бұрын

Courtney, thank you so much!!!! I did learn some new tricks from this video, especially about the pens, I never knew what each pen was designated for..... As always, you're an awesome instructor.

@allbrands1976 Жыл бұрын

Thank you!

@quietbook 11 ай бұрын

Thank you ❤

@michellewalpole4355 Жыл бұрын

Thank you. That was great.

@allbrands1976 Жыл бұрын

Hi Michelle. Thank you for watching. - Courtney

@teresadonovan1980 Жыл бұрын

Love this thank you make more videos!

@allbrands1976 Жыл бұрын

Hi Teresa. Thank you for watching. Courtney

@enlovegyjourney 2 ай бұрын

Thank you so much ❤❤❤❤

@pattishelton3169 Жыл бұрын

Great information I didn’t know a lot of this.

@debbiewhite3270 Жыл бұрын

TY I had no idea about the drawing or fussy cutting.

@jetloudesigns Жыл бұрын

thanks for the tips

@allbrands1976 Жыл бұрын

You bet!

@nickoalhowell6599 8 ай бұрын

❤ Thank you

@remington6363 Жыл бұрын

Great tips . Thank you

@allbrands1976 Жыл бұрын

Glad it was helpful!

@vickylichty6893 Жыл бұрын

I am considering a scan as nd cut and appreciate your videos.

@allbrands1976 Жыл бұрын

Our pleasure! It's so much fun.

@normabates5603 Жыл бұрын

Thank you for the tips.

@allbrands1976 Жыл бұрын

Our pleasure!

@rivergate950 7 ай бұрын

thank you!

@louisegoodwin1223 Жыл бұрын

THANK YOU SO MUCH FOR THE VIDEOS. I HAVE HAD MY SDX225 FOR 4 YEARS TOOK IT OUT OF THE BOX AFTER 2 YEARS, AND NOW SINCE THE BEGINNER VIDEOS I THINK I MIGHT BE ABLE TO START USING IT. I STILL DON'T KNOW WHAT ALL THE BUTTONS ARE FOR BUT SLOWLY MAYBE I WILL LEARN. THANK YOU CORTNEY LOUGOO

@allbrands1976 Жыл бұрын

You've got this! Thank you!

@allbrands1976 Жыл бұрын

Hi Louise. I'm so happy to hear that. Enjoy your machine. I'm here to help. - Courtney.

@nataliearena2241 2 ай бұрын

Thank you

@49lucky Жыл бұрын

Oh thanks now I know how to use transfer tape I was wondering about that thanks again

@allbrands1976 Жыл бұрын

Glad I could help

@ruthcedeno1055 Ай бұрын

Hi I loooove your video Thank you very informative I would like to know how many different blades does this machine has

@CGee17 Жыл бұрын

?? Thank you Courtney! I just got my SDX this week and your tutorials give me confidence. I am noticing the mats are very tacky and damages the paper when pulling it off. You mentioned a low tack mat. Is that different than the standard mat? Thanks again!

@allbrands1976 Жыл бұрын

For paper I would only use the blue low tack mat. - Courtney

@theaddingtontwins3219 Жыл бұрын

Great video as always. I have a question about cutting out applique pieces on a drawing. Let's say you have an drawing that has 6 different pieces that comprise the drawing - let's say a truck - with the cab of the truck, the back of the truck, and 2 wheels that each have an outer tire and an inner tire piece. How do you "pick apart" that portion of the drawing that will be cut out? Let's say - the inner tire - it's a circle within a circle. How does that work? Thank you so much.

@allbrands1976 Жыл бұрын

You would need to color sort each item. Depending on what model ScanNCut you have it would change how to do this. With the SDX330 it's super easy to color sort right on the machine. You would just tell it how many colors you have. I will do a show on this soon. If you have a older model then I would recommend doing it in Canvas Wordspace first. I hope that helps. I'll do a video on it soon in more detail I promise. - Courtney

@weeksd2903 Жыл бұрын

Do you ever add paper type or scotch type to hold the fabric on the mat

@allbrands1976 Жыл бұрын

Hi Danita. Yes I do especially if my mat is getting really old. - Courtney

@joannaastbury5136 Ай бұрын

This is really helpful - thank you. I'm thinking of getting a ScanNCut for my Memory Bear business - will it cut denim?

@allbrands1976 Ай бұрын

Many of our customers use their ScanNCuts for making memory bears.

@daringmocha1 9 ай бұрын

Hey… does it matter if my scan n cut is the 125 … or do I need to upgrade to the 325 or 330 machine…I just started using mine Ive had it over a year or so ago

@_beauty_By_caro_lina_ 5 ай бұрын

hi! maybe you can help me choose from 2 cutters. First is SDX1250 Another is SDX900? whats the difference between them? because in specifications basically everything is the same. Thanks for answer

@valexander4855 Жыл бұрын

Any tips for picking the best iron press? Does steam matter? How about the multi-purpose ones that would do sublimation printing on mugs and hats?

@allbrands1976 Жыл бұрын

avoid steam for adhesives, we like this one: www.allbrands.com/products/82909-hpn-demo-cp912-120v-hot-pink-craft-market-heat-pre

@dariusrael5721 Жыл бұрын

Can you do faux leather and thicker vinyl

@allbrands1976 Жыл бұрын

Yes it does it like a dream. As long as it's under 3mm. - Courtney

@sandyratter1688 8 ай бұрын

Do the items blades mats I have for my none DX machine work on my DX?

@peggybray5450 7 ай бұрын

Have a tutorial on vinyl fabric for purses

@biloparisien9903 7 ай бұрын

Hi miss can u tell me if sdx2250 scan and cut does embossing please ?

@valexander4855 Жыл бұрын

Someone sells an extension support for front of machine. A red one for about $20 and someone else sells a white one from Germany for quite a bit more. Do these work? Also, any tips for remembering to turn half cut on or off, or remembering to mirror image? Thanks.

@allbrands1976 Жыл бұрын

Are you referring to the Roll Feeder that cuts 6ft of vinyl? - Courtney

@slim215 Жыл бұрын

How do I know without ruining my material that I need to cut it more than one time how will I know???

@allbrands1976 Жыл бұрын

I usually just gently peel up the corner of the material to check if I need to run it again. Then lay it back down if I need to. If it's a thin material it only needs to go through once but if it's thicker it will need to run again. This is only with the rotary blade. The other blades will automatically cut all the way. - Courtney