Beautiful job! The way Allen Edmonds should make them in the first place. Love your channel!
@AaronG2480Ай бұрын
🙏
@mrandmrscorona8658 Жыл бұрын
Rebrand em to Aaron Edmonds
@AaronG2480 Жыл бұрын
😅😅
@jaystrongbow6111 Жыл бұрын
Great job Aaron, nice steel shank now, and complete leather recraft. Your customer will be very happy with that work you did. Thanks for the tip on rough out care, I didn't realize it was so easy !!
@deediddy Жыл бұрын
Very nice. I'm gonna have to buy a pair of Iron Rangers just to send them to you for a recraft. Merry Christmas.
@alexandertorres5809 Жыл бұрын
Exelente Trabajo como siempre.
@AaronG2480 Жыл бұрын
Gracias!!
@douglaschamroeun7687 Жыл бұрын
From grade “C” quality (regardless of it’s not worth MSRP) pair of boots to now truly grade “A” boots.
@Mr69abody Жыл бұрын
I think next time I head to LA I'll bring my old Chisholm boots. Nothing major just need this piece of plastic and the bottom layer of rubber replaced on the heal.
@petersilecchio4417 Жыл бұрын
Another Great Job!
@catbrock1 Жыл бұрын
Cutting corners to "so-called" keep the manufacturing prices down while making the boot here in the US. I'd rather they raise the standards and the prices and start innovating their product to encompass more of an audience that would buy their product. They don't make women's shoes or boots, and they don't throw their hats into the tennis shoe market. They don't do anything new except cut quality and end cost to the product.
@martintanz9098 Жыл бұрын
they do make tennis shoes.
@JohnEZang Жыл бұрын
The fact they make so many different styles and shoes is part of the problem not a solution. Once a company tries to tap into every single market they become jack of all trades master of none and typically start cutting more corners. I agree a women's selection would make sense though.
@lukeb5153 Жыл бұрын
Nice work!
@coryjones9573 Жыл бұрын
Allen edmonds aren't what they used to be!
@nhelreyes8080 Жыл бұрын
yuo did it again Aaron, Happy Holliday's 🎉🎉🎉
@AaronG2480 Жыл бұрын
Thanks, same to you!
@waxedearth5425 Жыл бұрын
Nice job
@MrSilvervw Жыл бұрын
Fantastic content 👌 👏 👍
@robertbradshaw9367 Жыл бұрын
Why didn't you create a channel for the stitching?
@sisleymichael Жыл бұрын
If the stitching is below the sole, the thread does not get worn away.
@robertbradshaw9367 Жыл бұрын
@@sisleymichael but it wasn't below the sole. It was flush with the sole surely.
@JinsKookieJams4 ай бұрын
@@robertbradshaw9367 *Yea I also wondered about that. When the stitching is inside the channel, then it doesn't get worn away. It helps the sole last longer I'd think, and keep the sole from separating from the shoe. Because when the stitching is outside the sole, and not inside a channel, it will get worn down. Then you're relying on the glue and nails to keep your soles on. Those are pretty strong as well. So maybe perhaps when the stitches are worn away, the risk of the sole starting to detach is pretty little, since you'd still have the glue and nails holding the soles on. But yea, having a channel is very nice to have to preserve the stitching for more longevity of the shoes!*
@gregrodriguez3169 Жыл бұрын
Nice job Aaron! I have these exact boots. It’s a waxed suede that has a separate and stitched smooth leather lining on the inside. I find these black Dainite soles to be very soft. If I decide to keep mine, I may send them to you for a leather or a Dr. Sole option. 😃
@AaronG2480 Жыл бұрын
Thanks!!
@R7Almazan Жыл бұрын
Increíble trabajo hermano, tengo una duda en este tipo de cuero se puede usar el neatsfoot oil para ser mas especifico el greasy leather cream de saphir o es mejor el mink oil para acondicionar? Te quedaron al centavo las botas. Saludos desde Michoacán
@AaronG2480 Жыл бұрын
Qué tal gracias, los 2 se pueden usar, yo no me enfoco tanto en marcas sino en el producto, eso ya es preferencia personal Saludos para Michoacan tierra de mi padre!!
@R7Almazan Жыл бұрын
@@AaronG2480 Te agradezco por el consejo no quería perder mucho la patina de las A/E. Chingon compartir las mismas raíces de tu padre. Saludos
@AaronG2480 Жыл бұрын
@@R7Almazan para rough out o cuero volteado, los 2 son buenos. para cueros regulares Cadillac,Bick 4, son excelentes condicionadores y jamás oscurecen el cuero! Además de ser baratos.
@60zeller9 ай бұрын
Lookin good
@rdaniel0079 ай бұрын
I have a pair of Higgins Mill I would like to have you do the same thing to them. How much do you charge?
@davidharris8797 Жыл бұрын
Nice
@scottdavenport1833 Жыл бұрын
Very nice.
@minnesota-hk1vp Жыл бұрын
Awesome work my friend….logger build next time lol!
@AaronG2480 Жыл бұрын
Thanks, once I get a chance I’ll definitely work on them, I haven’t even worked on my 9011’s 8087’s 8849’s So busy busy these days!!
@fernsolo Жыл бұрын
Quedaron muy bien 👍
@AaronG2480 Жыл бұрын
✋🏻👊
@lgroves3364 ай бұрын
Fiber board heel stack? No leather mid sole? I bought a pair of these but I plan to return them. For the price these two items should STANDARD.
@wayoutwest4944 Жыл бұрын
Merry Christmas.
@AaronG2480 Жыл бұрын
Same to you, thanks
@freddieslaughter1107 Жыл бұрын
What was the cost of this job on these boots, if I sent you my boots for a recraft?
@dannyg6045 Жыл бұрын
How much does it cost to have something like this done?
@docfarm1250 Жыл бұрын
Did these boots have a Leather or synthetic/Poron footbed?
@hasnahbintinayannayan.shukribi Жыл бұрын
❤❤😮
@mach5jeep7 ай бұрын
Not only a cardboard heel but that looks like a Texon insole as well. Not much better than a Thursday boot other than a better fit (for me at least.) It's getting bad out there. I watched another cobbler take apart some Red Wing Beckmans to find the combination sole was cardboard not leather and the heel rand was plastic. Sad.
@blakeseckinger3280 Жыл бұрын
Is there a reason they do the wooden shank instead of metal?
@lolkthnxbai9 ай бұрын
it works just as well as a metal shank in most cases and doesn't set off metal detectors.
@AL-pb1lb Жыл бұрын
Aaron great job! It’s becoming so disappointing to see the quality of the shoe is diminishing. It’s like you are paying more for the name than the quality.