allo BOSS 2 music streamer With peppy meter Waveshare 7.9 inches touch display.

No video

allo BOSS 2 music streamer With peppy meter Waveshare 7.9 inches touch display.

Рет қаралды 5,523

Күн бұрын

Inspired by Mr.Vincent Fong.
allo BOSS 2 DAC + Raspberry pi 4 music streamer With peppy meter using Waveshare 7.9 inches touch display Black anodised aluminum cabinet.
Musics played from 1tb mechanical hard-disk.
All WAV file format ripped from my own more than 2500 original audio CDs.
This cabinet is Laser cut for precise shape and finish, made up from aluminum (2mm Enclosures, 10mm Front panel & 16mm Pillars). Hard anodized (Black) with Brushed aluminum finish.
Alen screws used for cabinet. Philips screws for Raspberry board and DAC board.
Waveshare 7.9 inches touch display (1260x400).
Power supply is Mean well 5v, 7amps.
Imported gold plated RCA connectors.
Laser marked
The credits to the below mentioned people.
As I've mentioned in my description,
This was posible because of
1) Waretohouse supported Raspberry pi 4 & allo Boss2 DAC.
2) RareComp online stores supported for 7.9 inches display & other connectors.
3) ElectronicComp online stores supported for SMPS.
4) Mr.Sivaprakasam & Mr.Jai (Mechatraft) did precise CAD drawing.
5) Hitech-Laser cutting did the laser cutting.
5) Elcoats Mr.Nikil did their best anodising & finishing.
6) Mr.Ramesh, Mr.Suman did tapping.
7) Mr.Venkat & Mr.Vinoth did laser marking.
8) Crystal Hardware supported for fasteners.
9) The allo people (Mr.Ravipratapsingh & Mr.Harisha) helped a lot in technical.
10) Mr.Kiran Installation of OS, Peppy Meter & calibration for the display.

Пікірлер: 21

@abhi3001 Жыл бұрын

It is great to see you have made such a wonderful and professional finish housing around the Boss2 streamer with added features of a touch display, making it overall a premium player similarly available in the market, but at a fraction of the cost. No doubts this is a highly reliable player.

@thiyagarajank6695 Жыл бұрын

Thanks. Though Mr. Vincent Fong inspired for the display, First Its u who gave allo Boss2. I thank u again for every thing. Thanks again.

@jeykirthi Жыл бұрын

Excellent work done by you Guru. Happy to see this wonderful product.

@thiyagarajank6695 Жыл бұрын

Thanks a ton.

@audiomaster5858 Жыл бұрын

Wonderful

@thiyagarajank6695 Жыл бұрын

Thanks a lot.

@robyrey67 11 ай бұрын

Excellent work! Is it possible to add a temporary on/off button to power the system? I think you switch off Volumio by software and then you power it on by the switch (the one with a red light) on the rear of the enclosure. Thanks

@wfkorf1993 Жыл бұрын

Nice product, only the Power supply is not the best option for this player.

@thiyagarajank6695 Жыл бұрын

Thanks for watching my video. Point taken. It would be great if you can suggest an alternative power supply. Thanks again.

@azurasamego7524 Жыл бұрын

Wow.. awesome setup. May I know where I can Raspberry pi board ?

@thiyagarajank6695 Жыл бұрын

Thanks for watching my video. U can get it in online stores.

@lyquochung1417 Жыл бұрын

Excellent work! Could you tell me! How to install LCD 7.9" on Volumio 3.x? Thank you!

@thiyagarajank6695 Жыл бұрын

Thanks for your comment. Will share the tutorials soon. Thanks again for ur comment.

@sprakashban Жыл бұрын

Excellent Sir, Looks like a premium player and I am also interested in doing this kind of setup. It would be helpful if you could please share the product links and how much does the entire setup cost you totally.

@thiyagarajank6695 Жыл бұрын

Hi Mr.Prakash Nayak! Happy to see your response to my video and also happy to know your interest on this. The credits to the below mentioned people. As I've mentioned in my description, 1) Waretohouse supported Raspberry pi 4 & allo Boss2 DAC. 2) RareComp online stores supported for 7.9 inches display & other connectors. 3) ElectronicComp online stores supported for SMPS. 4) Mr.Sivaprakasam & Mr.Jai (Mechatraft) did precise CAD drawing. 5) Hi-Laser cutting did the laser cutting. 5) Elcoats Mr.Nikil did their best anodising & finishing. 6) Mr.Ramesh, Mr.Suman did tapping. 7) Mr.Venkat & Mr.Vinoth did laser marking. 8) Crystal Hardware supported for fasteners. 9) The allo people (Mr.Ravipratapsingh & Mr.Harisha) helped a lot in technical. 10) Mr.Kiran Installation of OS, Peppy Meter & calibration for the display. Thanks again for your response and interest.

@jojojoseph642 Жыл бұрын

Hi, is it posible to make this type with allo boss 1.2 ?

@thiyagarajank6695 Жыл бұрын

Thanks for watching my video. Certainly it'll work.

@frederikp7229 Жыл бұрын

Can piCorePlayer well running on this setup ?

@thiyagarajank6695 Жыл бұрын

Thanks for watching my video. I haven't tried it yet. Thanks for inspiring me. Definitely will give a try and post a video. Thanks again for watching & inspiring me.

@sinusshephard5314 Жыл бұрын

How much would you sell one for?

@thiyagarajank6695 Жыл бұрын

Thanks for watching my video. I don't sell. Made this for our use. Posted this video to inspire the allo Boss2 users. Thanks again for watching my video.