Almost Complete Honda Pioneer 1000 maintenance. How to change fluids, filters spark plugs &more.

Рет қаралды 3,615

Күн бұрын

DIY video for Honda Pioneer 1000 maintenance thumb nails to get you to the sections you need to reference.
0:00 - 0:15 intro
0:16 - 0:51 Manual Specs
0:52 - 2:50 Access to oil fill
2:51 - 5:26 location to oil & subtracts drain plugs , draining
5:27 - 11:05 DCT & Engine filter change
11:06 - 12:23 installing engine & subtrans plug
12:24 - 13:18 oil type and weight
13:19 - 14:31 oil fill
14:32 - 16:02 access and filling subtrans
16:03 - 17:00 cover to air filter and plugs
17:01 - 22:34 spark plug change
22:35 - 30:43 air filter change
30:44 - 34:39 diff fluid change
34:40 - 35:34 exhaust screen cleaned
35:35 - 35:56 putting fill access cover on
35:57 - 36:27 how to reset maintenance light
36:28 - 37:30 lubrication points
37:31 - 38:04 battery charge
38:05 final suggestions to check
The original video had an audio issue this is the updated 1 old video is removed.

Пікірлер: 7

@johnr6501 7 ай бұрын

Thanks for the vid! Check the manual, it says to screw in the dip stick.

@buckssenditinfochannel5263 7 ай бұрын

What year and model pioneer do you have? I just rechecked 16-2020 honda service manual, and 2018 owners' manual bothers say, "Insert the dipstick into the engine without screwing it in." If their is a year discrepancy, I definitely wanna get that noted.

@Devansmd80 6 ай бұрын

Just changed the air filter 2016 1000 Pioneer, with Honda part just like you said patience when feeding the new gasgets around rim. It took a couple of times feeding them around to get the stretch out to fit perfectly. Plugs Next Great video Thanks

@Devansmd80 6 ай бұрын

One other point I got A 5mm USA made 9 inch allen wrench on Amazon 4 bucks made it super simple

@buckssenditinfochannel5263 6 ай бұрын

Thanks for the review and input on the Allen!

@jimmysapien9961 Ай бұрын

@@buckssenditinfochannel5263 how do you check the radiator fluid level? You can’t see the bottle

@buckssenditinfochannel5263 Ай бұрын

@@jimmysapien9961 you should be able to hold a light to the back side of the bottle in a darker area to see the level. Also you can pull the cap and see or stick some type of dipstick to check level. Out side of the reservoir which needs proper level, you can also check the radiator level too, but make sure it's cool before you pull the radiator cap.