'Almost Heaven' Cloud Pour - Color of the Month Collab with

Рет қаралды 1,674

6 ай бұрын

Thank you for stopping by my channel - I hope you enjoy this video! Don't forget to give me a THUMBS UP and SUBSCRIBE if you'd like to see more. Thanks again for watching - leave me a comment before you go!
Here's my suggestion - mix up some paints and play! Give yourself the freedom to make mistakes and learn from them. You'll surprise yourself - I guarantee it. And you'll have lots of fun!
Now grab yourself some paints and BE FEARLESS!
If you'd like to support my channel, join Nate's Art Lab on Patreon!
We do monthly collaborations like this one, behind the scenes experiments, share our beautiful art, new and crazy ideas for techniques, and trouble shoot problems together!
www.patreon.com
2 other ways to paint with me in 2024:
I will be teaching at the Fluid Art Experience conference in Asheville, North Carolina, May 23 - 25, 2024! Check out the full line-up of courses at www.fluidartexperience.com
I'm also teaching at the Fluid Art Boutique conference in Dublin Ireland! June 25-27, 2024!
I cannot WAIT!! www.fluidartboutique.com
I love Fluid Art Co.! If you've never shopped with them before, Fluid Art Co supplies This Little Piggy and Stuck Up Piggy pigments, Aussie Floetrol, Amsterdam paints, TriArt, Pebeo and much more. They are on the cutting edge of everything Fluid Art and they have the BEST customer service!
www.fluid-art.co
This video is part of my ongoing monthly color collaboration with ‪@ArtByJulieE‬. Here is the link to her video also using the color WHITE! • January Color of the M...
Colors used in this video:
Chromacryl Acrylic Essentials White + Vallejo Pearl Medium
Amsterdam Greenish Blue
Amsterdam Primary Cyan
DecoArt Venitian Gold
My paint was mixed 2 parts Floetrol to 1 part paint, and thinned with distilled water if necessary to achieve a similar consistency between all of my paints.
I 'rescue' any paint that gets spun or tilted off by scraping it off of the table, straining it and saving it to use as a base coat for future pours. Very little waste!
All of my music can be found on EpidemicSound.com.
N8_Bright_Art

Пікірлер: 58

@RaindropArtbyNikkiRainey 6 ай бұрын

Nate, omg!! This is so gorgeous!! That color combo is perfect and those clouds!!!! Just beautiful! The bubbles don't ruin this piece at all! And warping doesn't either! Resin that beauty! Can't wait for the next one!! Have a great weekend!! 🥰

@donnamoore246 4 ай бұрын

I was born in Illinois, but moved to Hawaii at the young age of 5. At 60, I now reside in South Carolina and I miss the snow so much! This is absolutely beautiful!!!

@NateBrightArt 4 ай бұрын

Thanks Donna!

@christinerobison7368 6 ай бұрын

Almost? No this is heaven! Perfect pour, perfect music this was a very enjoyable video thank you! I believe the bubbles are from the bamboo, wood breaths so I think your right, 3 coats of gesso or even polycrylic will definitely seal your board!

@Marie-LouiseArt 6 ай бұрын

Oh my! I’m away with the angels my lovely. Beautiful! ❤😇

@sudhagupta4458 6 ай бұрын

Amazing blue shades 😍💙.Love that cloud pour very much and wet results were perfect with those amazing boulder cells 😍, 💙

@KelliSmith-mj5hc 6 ай бұрын

Prettiest cloud pour I have ever seen.

@KelliSmith-mj5hc 6 ай бұрын

That combo would make a beautiful wing pour. 😊

@djshotzy 6 ай бұрын

Beautiful cloud pour Nate!

@Dianestahlcreativeart 6 ай бұрын

Nate this is awesome,love your color choices! Love them blues.

@QueenVanuatu 6 ай бұрын

☯Yin + Yang ☯ ~ beautiful ~ 🦋claudia

@HollyFischerArt 6 ай бұрын

This is gorgeous, Nate! So pretty!

@DebbiePagtalonia 6 ай бұрын

Nate, this is beautiful! I love the plume clouds and the stars in the darker blue! I am sorry about the bubbles and warping, but this is still beautiful!

@yvencia1150 4 ай бұрын

Thank you for sharing 🎨 😊

@pattymullin8515 6 ай бұрын

I don't have a problem with the bubbles. I thought they were pretty cool! I sure loved the colors - really nice.

@EpiphanyCreations 6 ай бұрын

This really turned out great Nate!! I love the colors. And there is something about the cloud effect that gets me everytime 🥰😁

@brendataylor5928 6 ай бұрын

Very pretty. Love from freezing NB Canada!

@loricleary4473 6 ай бұрын

Beautiful cloud pour! Heartbreaking tho with the warping...i would definitely try kiln...great primer for wood💕

@karl-friedrichjagau9974 6 ай бұрын

Many thanks for sharing your actual cloud pour result. Maybe the current outcome hasn’t met your expectations but I‘m absolutely sure it has been pushing your experience to higher level Nate.👍🏻⭐️🙂

@NateBrightArt 6 ай бұрын

You are absolutely correct Friedo! I think I've got the technique down, and now I've learned what I need to do to be able to paint on these bamboo panels. Hopefully the next one dries better! : )

@michellereid545 5 ай бұрын

Still turned put beautifully! I've learned w bamboo and pine that using an oil "primer" works great I stead of a water based one. I use killz.

@nilsafaga74 6 ай бұрын

Love it! I love blues

@anndwandner3664 6 ай бұрын

Fabulous. I feel like I’m falling into a hurricane

@karistelma650 6 ай бұрын

Very pretty Nate. Resin it anyway. You might be suprised. I had a painting I almost threw out but ended up putting resin on it and now its one of my favorites😊 the bubbles pretty much disapeared.

@bakermodernart 6 ай бұрын

Gorgeous! I find with any sort of wood that sealing, not just priming, the wood is really important. Gesso is a great primer but not a good sealer. You can use shellac or most acrylic based mediums, like GAC 100, will work. After sealing, then gesso before painting. It's also a really good idea to seal both sides, especially with the humidity you have there. This will help prevent future warping. If one side of the wood is open to elements and the other side sealed warping can still happen at a later time.

@NateBrightArt 6 ай бұрын

Thanks Taneva! I'm going to PM you before I give this a try again. I've worked on wood before and never had this issue. I think you could tell from my voice I was a little heartbroken. Definitely don't want that to happen again! XOXO

@bakermodernart 5 ай бұрын

@@NateBrightArt hit me up any time love! I learned the hard way too!! Adding this here though so that anyone reading will get a little more info. Anytime you have edge glued wood like bamboo or those common pine round you will have higher susceptibility to warping than a solid piece of wood. Also, the thinner of the wood, the more susceptible it is to warping. That's why birch panels are "cradled" to stop warping.

@djshotzy 6 ай бұрын

I had a bamboo cutting board that warped. But straightened it out with weight by putting books on it.

@NateBrightArt 5 ай бұрын

Thanks! Someone else mentioned that too. I’m definitely going to try that - I want to save this if I can

@KelliSmith-mj5hc 6 ай бұрын

Laughing at us, Nate?😂 Meridian, Idaho. Our snow is MELTING!

@NateBrightArt 6 ай бұрын

Hahaha! It’ll be back

@SherryinAB 6 ай бұрын

Iam sure you can save this dreamy cloud pour with resin ! ❤

@janerexroad2498 6 ай бұрын

I'm sorry that happened, it was beautiful!

@cynthiaswain4070 6 ай бұрын

Wonderful!

@teraperry1008 6 ай бұрын

Beautiful colors and your peacock feathers! I wonder if you varnished the rounds first? 😊✨️✨️✨️✨️✨️✨️

@thislittlepiggy3349 6 ай бұрын

So pretty! Hopefully some resin might calm down the warp!

@tamiannibali6401 6 ай бұрын

Thank you for info on your spinner!!

@lisePaquette-ue1to 6 ай бұрын

Very beautiful ❤️

@CraftyChickenMom 6 ай бұрын

Wow great work Nate! Soooo fluffy !!!! That’s crazy that it warped , it’s so thick you sounding think it would ! Wonder if you could kinds save it with resin ? 💕💕🐣

@KelliSmith-mj5hc 6 ай бұрын

These clouds are GORGEOUS! The mini clouds in the cyan are awesome

@arlenelouro3976 6 ай бұрын

I'm stuck at work. Going to watch you later😂

@jeanettewhite2144 6 ай бұрын

Pretty ❤❤

@JosiWeaver-re5wt 6 ай бұрын

So, Mr B I have taken your advice to heart and on Monday mixed some paint. Today tried being fearless (or more likely foolhardy) and braved unheated garage to do pour as temperature had risen slightly. No t-shirt for me but several warm layers. Now going to watch your pour.

@NateBrightArt 6 ай бұрын

Hi Josi! That's awesome! How did it go? I hope you had fun and learned something!

@JosiWeaver-re5wt 6 ай бұрын

Didn’t really go to plan. I tried straight pour using six colours but the magenta killed everything else and the white base coat (which was left over satin emulsion with some Liquitex iridescent pouring medium mixed in) created a strange snowy effect on part of painting. Also think paint consistency was too thin and I poured off too much. I should have strained base paint as I spent ages picking out bits of gunk! One for a repour I think. Onwards and upwards. Report would read ‘could do better’.

@karl-friedrichjagau9974 6 ай бұрын

Hello Nate today I‘m not directly attending your premiere. Going to watch your video later!

@ckingartdesign2959 6 ай бұрын

😍

@resinartists 6 ай бұрын

Gorgeous cloud pour,Nate,it looks very pretty in wet stage,but you can save it with a resin coat or liquid glass coat,they will surely make the color pop up 💙💙

@c.a.chambers68 6 ай бұрын

I love the wet result - the dry seemed blurry but not sure if that was my phone - beautiful technique ❤

@NateBrightArt 6 ай бұрын

Thanks so much! The pearl pigments have a lovely glow in person, but on camera it's very reflective so it's hard to film. Someday soon I'll be able to upgrade my lighting so I can show these better. Thanks again!

@tamiannibali6401 6 ай бұрын

Beautiful cloud pour even though the bamboo bubbled up the paint!! Can you tell me how you made your wooden spinner, if you dont mind. :)

@NateBrightArt 6 ай бұрын

Hi Tami! Thank you so much. I ordered my spinner from Jessica Winterstrom. Here's the link:winterstrom-art.com/thespinner

@danettepugh9272 5 ай бұрын

Nate - try some Kilz primer. Coupke of coats both sides and edges

@NateBrightArt 5 ай бұрын

Thanks Danette! I'll see if I can find it here in CR

@danettepugh9272 5 ай бұрын

@@NateBrightArt i forget you are in beautiful Costa Rica!!!

@nighteagle317 6 ай бұрын

Nate, the painting was amazing, the canvas was just not. Do it again on like a Covexo.

@dianneszwedo6019 5 ай бұрын

Ignoring all technical problems...this painting can not, in my opinion, stand alone. It has many positive features but is yet to be completed. Give it companions for the wall.