Too lean Tune and Too Rich Tune India Distributor: www.joyrisinghobby.com
Пікірлер: 7
@brando5555558 жыл бұрын
For someone knew to nitro this is a really helpful video. Sometimes it's hard to diagnose which needle is too lean or rich if you're not quite sure of the symptoms but this demonstrates it quite well.
@NitroRCNerds9 жыл бұрын
Ryan, this is a great video, as is the entire Alpha series. So much, so I've decided to try one out. Much like Werks, all owners are fervent about their Alpha Lutz's. I know two guys who have one and they rock and roll!. Honestly, I was sold when I saw that carb face plate. That's thinking outside the box Anyone come visit after 4/30 to see my buggy rockin the bright pink head. ;-)
@Mrykcykc10 жыл бұрын
Thanks
@NitroRCNerds9 жыл бұрын
I'm a little over a gallon in and things have been fine thus far except my needles are way out from flush when it got a base tune. I noticed your HSN was right at about flush (mine is about 3.5 turns out). Are you running a different carb here? Also, the way I tune (and I have experience with many brands Nova, OS, Werks, , etc.) is at 00:31 in this vid, I listen for the idle to two stage. I lean the bottom until the idle is consistent for ~12-15 seconds then I lay it down. This carb does not seem to like the 'Ron Paris' tuning method. Why is this?
@pierrehennig83215 жыл бұрын
Hi guys what are the settings for alpha 28 3port engine...
@antonigkoumas53149 жыл бұрын
hi does any body know the tuning parameters of this engine?