Fellow Ode Brew Grinder SSP Burr Upgrade
Рет қаралды 42,953
Күн бұрынUpgrade the Fellow Ode Brew Grinders factory burr set, ( Limited to 450-500µ ) with SSP Grinding Solution Burrs. Shop Fellow Ode 64mm SSP Burrs: alternativebrewing.com.au/pro.... Manufactured for the ultimate in performance in precision grinding, the SSP Red Speed and Silver Knight Burrs advance the Fellow Ode's ability to grind very fine, achieving an even particle distribution and brewing delicious coffee. In this video, learn how to install these burrs and what you should know from installing them.
Shop Fellow Ode Brew Grinder: alternativebrewing.com.au/pro...
1:19 Factory Burrs vs SSP Burr
2:13 Installation of SSP Burrs
4:40 Seasoning the Burrs
5:18 Calibration of new SPP Burrs
7:02 Pros & Cons for Upgrading Burrs
9:42 Brewing Espresso with new Burrs
10:44 Brewing Filter Coffee with new Burrs
SUBSCRIBE to the OFFICIAL Alternative Brewing KZfaq channel 👉 bit.ly/2MnmLOl
LAUNCH Alternative Brewing store online now 👉 alternativebrewing.com.au/
The SSP 64mm Burrs are the ideal option for upgrading your Fellow Ode Brew Grinder to be more focussed towards multi-purpose grinding. Capable of grinding finer, faster and as cool as possible, you'll be grinding with the best high-performance SSP 64mm burrs at your disposal.
Silver Knight Burrs carry a special geometry to the burrs cutting edges which limits grind size distribution and increases cutting speeds whilst keeping the burrs cooler than your average burrs - and the results in the grinds are instantly noticeable with the taste in the cup all worth it.
Red Speed Burrs (Titanium Aluminium Carbon Nitride/TiAlCN) equally carry advantages that include maximum strengthened surface for a rating of +5 Tonnes of coffee usage, and a reduced heat transfer coefficient with higher cutting forces.
These Burrs are compatible with the Fellow Ode Brew Grinder, as well as the Mazzer Super Jolly and Mazzer Mini. Upgrade your grinding capabilities and easily install the Burrs to either grinder, taking your brewing experience to the next level.
Fellow Ode SSP 64mm Flat Burrs Features
Boost Grinding Performance - Upgrade from standard burrs to SSP burrs, the ultimate in precision.
Multiple Grinder Compatibility - Fit to your Fellow Ode, Mazzer Super Jolly E or Mazzer Mini.
Better Cutting Surface - Using special geometry and surface coating to enhance the burrs performance.
64mm Cast-Iron Burrs - Tougher, faster and longer lasting burrs.
Easy to Install - 3 Holes line up with the holes in the grinder disc for quick installation.
#alternativebrewing #fellow #sspburrs
@mmmkmkmkmable 2 жыл бұрын
Just bought both from you guys and re-watching this before i swap out the burrs, super excited!
@AlternativeBrewing 2 жыл бұрын
Awesome! Thank you!
@puschenrf 2 жыл бұрын
Ich kann zwar kein Englisch, aber optisch war die Mühle und ihr SSD UP-Date von der Fellow Ode super erklärt. Thank you
@khazelnut 3 жыл бұрын
my gf across the room asked me why i’m watching a youtube video about birds
@AlternativeBrewing 2 жыл бұрын
😂 Burrrrrrss
@IncitingTheShrew 8 ай бұрын
Really great video, thanks! Super informative and helpful.
@AlternativeBrewing 7 ай бұрын
Thanks so much 😀 Glad it was helpful!
@frankmartin182 2 жыл бұрын
Great actual comparison at the end. You put in the work and it shows.
@AlternativeBrewing 2 жыл бұрын
Thanks so much 😀
@cory9437 2 жыл бұрын
This is such an excellent & informative video. I just ordered the Ode with preinstalled SSP burrs & seeing close-ups of the grind sizes at each setting is so helpful, since the recommended grind sizes under the lid no longer match.
@AlternativeBrewing 2 жыл бұрын
Glad it was helpful!
@cory9437 2 жыл бұрын
@@AlternativeBrewing Would you be able to recommend a grind dial setting for the Moccamaster with this setup?
@AlternativeBrewing 2 жыл бұрын
@@cory9437 Yes, most certainly. Standartd, It'd be the mid-point, maybe a little coarser than half way - but with the SSP burrs it'd be close to 9 -11
@aoalr Жыл бұрын
The upgrade is 100% worth it. I have an Ode with stock burrs and the grind size is horrible for V60. I stopped using it and use a Kinu M47 instead. I’ll get the upgraded SSP burrs to continue using it
@aoalr Жыл бұрын
Don’t get the Ode without the SSP. The last couple minutes of this video show exactly why
@Joseph-C Жыл бұрын
@@aoalr the Ode without ssp is only $255... Basically as much as your hand grinder but produces way less fines because it's a flat burr and grinds your coffee for you in the blink of an eye. I brew world class coffees on my V60 with a stock gen 1 Ode and have had some of the best cups of my life out of that grinder. It is more than good enough for people to enjoy V60 brewing.
@ferdinandludo8851 2 жыл бұрын
There is also an SSP bur for pour over coffee. Any chance after you installed those specific for pour over SSP burrs that it would come close to the taste profile of the C40 Manual grinder ? Thanks.. love your reviews
@smed6014 3 жыл бұрын
Well I'll be. So this is where you ended up. Good to see you're still in the Coffee industry man. Hope you've been well. From an Old friend, with a Red Hat ;)
@AlternativeBrewing 3 жыл бұрын
hahaha you got me on the clue of the red hat!
@smed6014 3 жыл бұрын
@@AlternativeBrewing Haha, glad you remembered it. Still goin strong too, albeit rather dusty. Not sure how much your allowed to say on here, understandable, but how the bloody heck have ya been? Hope the little one is doing well. Is this a recent job for you or was this the job you transitioned into the last we spoke? Either way, good too see ya. Was a total misclick on my behalf, video started next thing you know I vocally said "Eyy it's you!!" rather loudly on the train.... Oops!
@oliver1367 2 жыл бұрын
It's a small world
@smed6014 2 жыл бұрын
@@oliver1367 Eyyyy! Sure is! Hope You're doing well man, where ever lifes taken you :) (assuming this is the same Oliver i Once knew)
@rpinarreta 2 жыл бұрын
Seems like a good low retention grinder for coarser grinds but underpowered for espresso or finer grind sizes. Yet to see a single grinder that is ideal for both coarse (pour over+) and fine (espresso+) grinding. Although the machine may be capable the optimized burr geometry varies between them. Further who wants to redial grind size once optimized when switching between P.O. & espresso. Great reviews btw.
@De132an 2 жыл бұрын
What about for the SSP Red Speed Multi Purpose Coated 64mm MP Flat Brew Burrs? I’m assuming the ones you are showing are for espresso rather than brew or pour over? Right?
@LJ-wo1wf 2 жыл бұрын
8:40 -- dose cup inside catch cup = friggin' brilliant. Whichever dose cup you found for this, it's like it was designed exactly for the catch cup.
@AlternativeBrewing 2 жыл бұрын
thanks so much 😀 It was this one alternativebrewing.com.au/products/tiamo-dosing-cup
@htrrsprings2103 3 жыл бұрын
With the updated burrs where are you finding success for pour over with Fellows Stagg X? I'm struggling to get clear flavors although grinds look decently fine. I'm playing around the 7-8 area.
@AlternativeBrewing 3 жыл бұрын
Had not tried with the Fellow Stagg X sorry! But with upgraded burrs, you will get better uniformity of grinds that will improve the overall flavour and clarity of your coffee.. so it could be worth you while 👍
@vizzo7 Жыл бұрын
how many microns are each settings of the fellow with the ssp burrs
@RianSpaulding 6 ай бұрын
Quick question, for the dial adjuster metal piece. The four screws that hold this in, should they be tightened all the way? My machine locks when I tighten them fully. I'm actually trying to install the SSP MP burrs.
@AlternativeBrewing 6 ай бұрын
Yes, don't tighten them too much 👌 just enough to hold it in place. Over-tightening can cause issues
@BitcoinNoddy 3 жыл бұрын
Will this be shipping with the new burrs if I buy one now? Or best to wait until the end of the year?
@AlternativeBrewing 3 жыл бұрын
Hi Mark, the Ode will remain the same as it always has .. The SSP Burrs are a seperate product that you purchase and install at home
@Assenayo 3 жыл бұрын
With the default burrs I would like finer than what it can do for a V60 let alone an AeroPress, how many clicks from the 0 point would I calibrate to get the SSP burrs to behave somewhere closer to the lid so I can do AeroPress to French Press?
@AlternativeBrewing 3 жыл бұрын
great question! I would say best around the 7-8 clicks off zero. This would take the One Setting (Prismo) to around the (2) Setting of the SSP Burrs shown in the video at 11:24. Than anything coarser than this would file in to place fairly accurately within an acceptable range.
@Assenayo 3 жыл бұрын
@@AlternativeBrewing that looks perfect actually.
@wanaboed 2 жыл бұрын
Hey, Josh. Have you ever tried the Red Speed SSP Burrs to the Ode? If so, how does it differ from the Silver Knight that you installed in this video?
@AlternativeBrewing 2 жыл бұрын
I used the multipurpose burr on the ODE - I have not use the Unimodal or Espresso Burrs on the Ode I'm afraid. Red Speed and Silver Knight though, are the same burr, with different coatings - so I would assume they would have a very similar performance.
@bertraminc9412 2 жыл бұрын
Why did you rotate the assembly at 4:28 Are you aligning something? I can’t get mine back together with the SSP burr set installed and calibrated.
@AlternativeBrewing 2 жыл бұрын
no real reason - other than to show that it's pretty important having that auger key - or otherwise the burrs will eventually slip in place. Press hard against the rotational burr set to make sure it's full placed on to the drive shaft. if it's not on all the way - the face plate won't go on easily or at all.
@bertraminc9412 2 жыл бұрын
@@AlternativeBrewing Yeah I think that was what was happening even though I did attempt to align the key with the notch. This machine is an engineering and design nightmare. Pretty much the opposite of a German design. Almost everything associated with this machine is on the edge of working. It takes a lot of attention and understanding just to get it to work. And that’s not an exaggeration.
@canbo7643 2 жыл бұрын
I've installed the SSP burrs and recalibrated them. What grind setting would you recommend for a Bialetti mocha pot?
@AlternativeBrewing 2 жыл бұрын
I would say around a 3-4 👌
@canbo7643 2 жыл бұрын
@@AlternativeBrewing Thanks mate.
@Coffeeology 3 жыл бұрын
Where can we get the poster behind you?
@AlternativeBrewing 3 жыл бұрын
it's a 1/1 sorry! A customer made it for us and sent it in.
@changgooey 2 жыл бұрын
with the new ssp burrs install can you grind esspresso beans for lets say your pour overs or is it too much on the motor?
@AlternativeBrewing 2 жыл бұрын
No, this would be okay to do. It's more the other way around ... so harder, lighter roasted coffee - ground for espresso.. could pose risks to the motor over a long period of time
@changgooey 2 жыл бұрын
@@AlternativeBrewing so getting a light roast coffee would be bad for the grinder? say the Lavazza Gold Selection Filtro Whole Bean Coffee
@athenasblueprint 2 жыл бұрын
@@changgooey the lighter roasts are harder on the motor but only pose a risk when grinding fine like for espresso. I hope that helped answer your question
@edwardhuang7852 Жыл бұрын
Hi Josh, thanks for the video. So if i change the Burr, will i be able to grind for espresso? Will the grind be fine enough? Out of the three, which is the best for espresso?
@AlternativeBrewing Жыл бұрын
Yes it will! There is the Espresso Burrs from SSP - the rest will do it too just fine - but the Espresso Red Speed burrs are the best by far fro ESpresso Grinding 👌 alternativebrewing.com.au/products/ssp-64mm-flat-burrs
@edwardhuang7852 Жыл бұрын
@@AlternativeBrewing Thanks for your reply.
@JT-zy2ft Жыл бұрын
There is no “zero” setting. 1 is the lowest setting. Fellow recommends adjusting one click to the right for gen 1 and 2 burrs from the chirp and 5 clicks to the right with ssp.
@madeleinedavitt Жыл бұрын
I just bought this Ode Grinder but I have an espresso coffee machine, what upgraded Burs do I need!?
@AlternativeBrewing Жыл бұрын
Any of these: alternativebrewing.com.au/products/ssp-64mm-flat-burrs
@anawint 2 жыл бұрын
Do you know what is the lowest micron the 1.1 ode factory burr can achieve?
@AlternativeBrewing 2 жыл бұрын
It is around 350-400µ ... Espresso is best in a range of 100-200µ
@ThunderRunner 2 жыл бұрын
@@AlternativeBrewing is the 1.1 update sufficient now for pour over with lighter roasts? I have a niche and was curious about this for a flat burr filter only option, not sure if the ssp would be worth the upgrade or just the 1.1 version.
@nicholassetiawan4647 2 жыл бұрын
Hi Josh, thanks for the vid, wonder what grind setting did u use for pourover with the SSP burr ?
@AlternativeBrewing 2 жыл бұрын
Hi Nicholas - this depends on where you've placed your zero point. If you did it - like it was done in the video - with Espresso or basically burrs touching on 0 - than Pour Over would be a good 7 or 8
@redrich2000 3 жыл бұрын
What Ode setting did you use for espresso?
@AlternativeBrewing 2 жыл бұрын
With Burrs touching on 0 ... I had the grinder set on 2, with a 20g dose at 25sec out for 40g.
@sazlanmahdi1903 2 жыл бұрын
@@AlternativeBrewing did you use pressurised portafilter? Or non pressurised portafilter?
@nhayes927 2 жыл бұрын
@@sazlanmahdi1903 everyone ar this level of the game is using unpressurised baskets
@miyamotoyamazaki1760 2 жыл бұрын
Should i upgrade to the ssp if im not going to use it for espresso
@AlternativeBrewing 2 жыл бұрын
No not really - it does have some finer gridn settings for pourover - so if you feel you're missing out on some level of extraction that could benefit a finer grind, go for it - otherwise the Fellow Ode is performs well with the standard burrs
@miyamotoyamazaki1760 2 жыл бұрын
@@AlternativeBrewing thanks for the help!
@rjejames28 2 жыл бұрын
I have put several hours in now and was unable to get the stationary Burr even remotely close to going in. I think it's probably my fellow ode unit but not sure. I got these beautiful silver night cast sweet burrs from SSP that I can't install, it's such a bummer. Also my SSP cast sweet burrs there's no indication of which one is the rotation and stationary Burr and they look exactly the same so I'm not sure how to tell them apart. The grinding teeth look the same from the profile view and they look the same thickness, I'm wondering if they're interchangeable.
@AlternativeBrewing 2 жыл бұрын
I'm surprised to hear this! SSP burrs regularly add which is which 🤔 Have you placed the new burr next to the old to compare? They maybe be incorrect size. not sure
@rjejames28 2 жыл бұрын
@@AlternativeBrewing I just had emails with both SSP and fellow ode and apparently there have been some units with some stationary burr slots that are to small. Both parties are aware and have been very helpful in fixing the issue so far. They are going to send out a new ode that hopefully the burrs will just fit plug and play I'll update when it happens. SSP informed me that my cast sweet brewing burrs are the same geometry on both burrs so no difference they are interchangeable.
@AlternativeBrewing 2 жыл бұрын
@@rjejames28 thanks so much for getting back to us! Great info 👍 Hope it all goes well with the new ODE
@rjejames28 2 жыл бұрын
@@AlternativeBrewing I had the same issue with the second ode but SSP is amazing and making a second custom burr set to fit the unit and shipping them out. Hopefully next week I'll have them.
@rjejames28 2 жыл бұрын
@@AlternativeBrewing update I just got my brand new redesigned cast silver knight sweet burrs which are 64.1 mm instead of 64.2 and I'm happy to report they fit the ode. It was still very tight and took multiple efforts but they fit. I ran a couple pounds of dark roast through them and ready for tomorrow's chemex. Big shout out to SSP and Ode who both stood behind there products and were very helpful along the way.
@rdalmasso7326 2 жыл бұрын
I can feel that we gonna see a Fellow expresso grinder in the future.. Above that there’s a bunch of good expresso grinder, personally i have a Flair 58 at home, using both my Eureka Mignon crono (very cheap) and my 1zpresso Kplus, whiling to change my electric grinder in the future for a better one and also a grinder that will give me a range of possible upgrades ( right now no burrs set for my Eureka crono)
@rdalmasso7326 2 жыл бұрын
@Deep Cut Reactions sorry my French always wanna put a X
@WillLeingang 2 жыл бұрын
Wow what a difference. Too bad they don’t ship with those ssp burrs.
@brentroman 2 жыл бұрын
In Taiwan, you have the option. Not in the US though at the moment.
@Submersed24 2 жыл бұрын
they do now
@benmckee3993 Жыл бұрын
I made the mistake of unscrewing the wrong four screws when disassembling the grind dial... so it's now in pieces, and I'm unclear on what to do here. Argh. I feel a little dumb!
@Submersed24 2 жыл бұрын
What did he spray the beans with?
@AlternativeBrewing 2 жыл бұрын
Just a little water from a spray bottle. It's called RDT. and dramatically decreases static generated by the beans being ground
@TomFoolery9001 2 жыл бұрын
Woof, those ssp burrs are too expensive.
@noahmichael89 3 жыл бұрын
I really don't think it's wise to show this grinding espresso and give people ideas for hacks as Fellow clearly states "Using these burrs in Ode to brew espresso will void the warranty. Using any other SSP variant or 3rd party burrs in Ode will also void the warranty."
@thomasguscott8671 2 жыл бұрын
they sell the ssp burrs on their website, it definitely doesnt void the warranty.
@noahmichael89 2 жыл бұрын
@@thomasguscott8671 That’s a quote from their site, bubba. I think you missed the part where it says “espresso.”
@thomasguscott8671 2 жыл бұрын
@@noahmichael89 This is what I am responding too... "Using any other SSP variant or 3rd party burrs in Ode will also void the warranty." Thats what you said.
超人夫妇
Рет қаралды 35 МЛН
Coffee Nerd Aaron
Рет қаралды 16 М.