Your last statement on this video is what I came for! Thanks! Learn something everyday. Gonna buy one for my dad.

This was so refreshingly simple, thanks for making this! When you’re a noob at all this stuff like me, it was exactly what I needed.

A very nice video on the installation of the PA system. You made it look really simple. Thanks for sharing ...

Great video lesson, thank you very much. I learned a lot about how to set up a PA system with the Mackie mixer

A good presentation.simple but very informative and with a good result.

Nice presentation. Simple set up.

Thank you for making it plain and simple.

good work, i am loving the outcome song

Absolutely correct and straight to the point. Good job 🙂👍

I was wondering whether a Mixer can be directly used with a Powered Speaker or not !!! Your video helped me to decide...

The better explanation that is understandable and organized, that I have found

inbuilt speaker base do create any problem when we increase base from mixer??

Nice little mixer!

What is the part you use to connect to the phone?

Very helpful video❤

IS there a reason you didn't go with the TX 210's with the 10 inch LF?. I usually believe that 10's sound better for mid and highs when used with a sub...

Where can I get the Bluetooth receiver you connected to the mixer

Will this setup apply to an electric guitar and a NuX looper/drum pedal?

Absolutely Big help thank u

I am new to the set up. I have a question before I purchase a Mackie mixer. How many line mixer will I need to purchase, I have a Roland speaker which I plug my keyboard, voicelive 3 extreme into. I plan on purchasing a tc helicon stage monitor. I have a guitarist and he sings as well so I think I need to plug in two mics, two helicon devices and the Roland speaker. Do I need a mixer with 5 slots? Thank you for your time

is good if I use PA speaker as studio monitor but at distance?

How does this mixer hook up to Yamaha soundboard (amp) with the speakers that come with it?

Hi, i have profx12, what kind of speaker that i can use? tQ

Nice and simple. Though the power strip tip at 4:31 doesn't really apply, maybe a long time ago, but not anymore. Having clean power helps with noise.

What type of bluetooth receiver did you use for this video?

Hi . Can i use Alto Ts-308 as home theater center speaker ! Thanks.

Woow great video thank you.

Can you actually connect more then 2 speakers on the mixer?

I'm new to the Alto range but I'm more than happy with quality and sound output, I have the TX308's. Awesome speakers..

Newbie here,i have 2 powered speaker but no mixer ,can i use both speaker on 1 mic? What cable i need to use?

Thanks for explaining the process simply, how would you go at linking a 2nd speaker to each of these speakers, so you have 4 working? I understand they all need their own power cord, but I am not sure about inputs and outputs, or if I would need a Male to Male XLR cable, instead of a female to male XLR. Help please haha

Excellent choice of music.. Ratsaman Live Up - Yes-I ! JAH Marley Live!I-ya! RASTAFARI Live!.. .Peace and Blessings ☝️

Great video ~ Thanks

What stand for PA ? Can you please tell me

What kind or brand that receiver reply pls. Frm. Philippines tnx

Good stuff!

Is there a echo Volume in that mixer?

Nice job..

Hi there! How do I hook up my ZOOM L8 to my HARBINGER vari v2315?

how did you not get any feedback or noise?? ?

Good master!

Thank you so much!

thanks bro!!

Nice music vibs

Great. Thank you.

ty for sharing

Awesome! Thank you. What Bluetooth adapter are you using?

Thank you

Got two of the new models. The limit light will turn red when clipping, correct? Because the green light stays on during use. I just want to make sure I am not abusing their potential.

Can I use this in a small church?

Can you drop the speaker link

💯💯💯💯💣💣💣💣♥♥♥♥🔥🔥🔥🔥🍺🍺🍺🍺✌👌👍👉👉😎😎😎😎 your video was very helpful you gave step-by-step

Hlo sir what is the full definition and uses of PAN in mixer?? could you please explain ??

HI, WHAT IS THE COST OF THIS SYSTEM, IS IT EASILY AVAILABLE IN MARKET.

Pls give speaker buying link

Can i have all the list in the video that you've set up.please

Thanks

I'm iffy about buying a built in bluetooth, because technology advances so fast. I'd like to future proof equipment (even if it means more wires). I'm new to this, only because I'm helping my dad choose a "karaoke" machine, but this would be great especially for other family events (birthdays, baby showers etc)

I was afraid you were going to get some major feedback from the mic's being on top of the speakers. Not sure how you prevented that. Great Video. Do you know if the "link" cable on the speakers is for daisey chaining them, say if you had (4) speakers. I assume a normal m/f XLR cable would would work on a link cable. yes? Thanks again for the video and the tip about rca allowing for less output. Didn't know that.

Hi sir.. great video.... but, can passive speakers hook in directly to the mixer?

Interesting...!

is it possible to plug an electric guitar and bass guitar directly to it? or it should have di box. thank you

Can you make video same again but.. Mixer desk to Amplifier to graphic EQ to passive speakers..

Would the sound be better if you connect the sound source with a cable vs Bluetooth?

Thanks , other video to hard for nothing , but you make it simple ,.. can you expline how can i conect me phone and recording ? Please

Can you plug in the XLR cable to mic one and straight into the PA speaker and do it that way?? pls help

Very nice and informative video...Thanks. Can this setup be used for a small audience of 50/80 people indoor in a home size 300 Sq. Ft. for Live Music + Vocals having Keyboard + Octopad...???

This Bluetooth speaker JBL can connect with mixer

Hi, most important thing is you need to help us saying all cables you have used cables named. It’s help a lot your video so I can now setup my mixer. Thanks

How would you do this with 4 speakers?

This was so helpful! Thank you! What brand Bluetooth adapter are you using? I think that’s a great idea!

Those cords are low impedance cords. The low impedance is much better than the high impedance.

🇿🇦👌❤️

Using TWO channels to Plug in the iPhone is really silly as you could've plugged BOTH those cables into the 5/6 Channel Strip .... ( i.e. 5/6 ... 7/8 ... 9/10 & 11/12 Strips are Stereo Channels designed for just that ,,, taking two plugs into the same strip ~ they are even marked "L" - LEFT & "R" - RIGHT ). ...This would Free Up Channel 7/8 for another sound source e.g. Laptop audio out, Background Music source etc Those XLR cables are also commonly known as Microphone Cables ... a less confusing term for beginners watching this.

Like me as new to this kind of demo .it would be good to show where those connections go into the mixer which slot exactly👍

could we facetime i need help hooking up two mixers correctly pleaseeeeeee

Very cool, I am definitely getting this, but two 12" speakers, I want to drive my neighbors, lol neighborhood 😜

I WAS WONDERING WHAT THOSE HOLES WERE FOR IN THE MIXING BOARD, I WAS TRYING TO PUT MY FINGERS IN, AND DIDN'T FIT, SAME THING WITH THE SPEAKERS, I WAS WONDERING WHAT THOSE HOLES WERE IN FOR IT, MY DIC AND FINGERS DIDN'T FIT. NOW I KNOW. MY COMMENT IS BASED ON THE COMMENTS ON THIS VID.

Kay.praic

rastaman liveup

Sub 15 1200w

Never, Never, Never 1. plug your speakers on a power strip (bar), 2. Locate your speakers close to your mics to avoid the 'feedback loop'

hehehe

You have to be careful to use proper speaker cables, with xlr's, and not normal mic cables, even if they are balanced. If not being careful, it's as bad as using normal guitar cables as speaker cables. Something I learnt from experienced sound techies. It's all about safety, for yourself and the equipment you have probably spent a small fortune on.