DIY Epoxy Clear Coated Game Board

No video

DIY Epoxy Clear Coated Game Board | Alumilite

Рет қаралды 732,831

Күн бұрын

This video shows the process of making a photo game board. A collage of photos is laminated onto the surface, which was then sealed in with a high gloss and protective coating using Amazing Clear Cast Resin. Board will be used as a playing surface on a leather ottoman or on the floor. The clear coating of the resin table is unique and beautiful.
Products used were Amazing Clear Cast Resin by Alumilite and available at Hobby Lobby & Michael's craft stores or at www.amazingepo...?KZfaq&DIY_Epoxy_Clear_Coated_Game_Board
Related Videos:
• Coating Stainless Tumb...
• Petoskey Stone Coating...
• Erasable Menu Board wi...
Additional videos and product information can be found at www.barcoating.com?KZfaq&DIY_Epoxy_Clear_Coated_Game_Board or www.alumilite.c.... You can also call us at (800)447-9344.
Social Media:
FaceBook:
/ amazingmoldputty
Blog:
amazingmoldputt...
Instagram:
/ amazingcasting
Pinterest:
/ amazingcasting
Email:
info@alumilite.com

Пікірлер: 229

@thenightporter 2 жыл бұрын

I have so many little souvenirs in folders like ticket stubs, brochures, matchbooks of places I have been or events I have attended. A table like this would be a nice way to preserve them and ne anle to enjoy them every day.

@AlumiliteCorporation 2 жыл бұрын

That sounds like an awesome project idea!

@kristinaandthegerman4554 4 жыл бұрын

I am SO glad you specifically told your viewers to NOT mix too quickly!! I’m relatively new to resin; however, my biggest lesson learned is to slowly incorporate the resin to create less bubbles. A torch is great to pop them but if you mix slowly it will assist in that process. Plus you save yourself from burning arm syndrome from whipping the resin. Bonus!!

@AlumiliteCorporation 4 жыл бұрын

Yes, that's a great point! Thanks for watching :)

@sandramontes5498 4 жыл бұрын

That's a wonderful way to share memories instead of the old photo albums. Love it. I love working with resin so I'm excited to try this. Thank you.

@AlumiliteCorporation 4 жыл бұрын

Sandra Montes thanks so much for the lovely comment! We’d love to see what you make. If you tag us in what you make we will share it with the world :)

@christinevogt-klimshuk2461 2 жыл бұрын

This is best and easiest to understand video I have seen for a decoupaged table under resin! All the tips, dos and don’ts are great! Thanks so much!

@TTVkiller-clown 2 ай бұрын

Absolutely now makes sense to me! Thank You. I seen my parents do this when I was a Lil Kid, the playdough didn't make much sense to me then. They used the playdough to keep it from running off . . Great Job.

@antoniospitarys7905 3 жыл бұрын

This is the best description I’ve seen on embedded photos in epoxy resin on wood. Thank You

@AlumiliteCorporation 3 жыл бұрын

We're glad we could help - thanks for watching!

@Momo-xm1nx 4 жыл бұрын

I’m so glad you used mod podge, I was worried the brush strokes would show through the resin. I’m doing something super similar, with a wallpapered tabletop. Im feeling way more confident now. (And the good news is, if I ruin the table it was free and a total piece of junk anyway lol)

@AlumiliteCorporation 4 жыл бұрын

I hope it works out for you!

@jst1man 7 ай бұрын

I've been using Epoxy Resin and UV resin for years now. I do recommend a polyurethane sealer as a top coat. It will help it last longer and protect against UV. And the plus side, it will harden like glass eliminating scratches. Making it more durable. It's extra work, but I do it with everything Resin.

@valjeanmacias2434 4 жыл бұрын

I have been wanting to try this procedure and your detailed instructions helped very much. Thank you for the instruction and beautiful job!

@AlumiliteCorporation 4 жыл бұрын

Thank you, and good luck with your project!

@adrianakenley8634 3 жыл бұрын

That's great thank you, I just picked up a 60s table with old postage stamps on the surface. The modpodge is a good tip and letting it drip over the edges too. Thank you for the video ☺☺☺

@AlumiliteCorporation 3 жыл бұрын

Very cool project, Adriana! Thanks for watching!

@brandenapexo604 3 жыл бұрын

This is the easiest video to understand regarding this subject thank you

@AlumiliteCorporation 3 жыл бұрын

You're welcome! Thanks for watching!

@Lovingmyfood 9 ай бұрын

I’m about to start this project can’t wait to see the end result

@sordidloam 4 жыл бұрын

I'd certainly add a comment about covering the product with a tent while drying to keep from getting tons of particulates in the top coat.

@AlumiliteCorporation 3 жыл бұрын

That's a great idea! We were working in a fairly well-ventilated area so we didn't have to worry about too many particulates.

@nizhonividaa 2 жыл бұрын

Thanks for making this video 🤗 Its short simple and straight to the point! So many Great tips can’t wait to get starting on my resin creativity !

@MARTIN-bd7gm 2 жыл бұрын

Ive done this using polyester resin worked just fine for me and its much cheaper to buy , just make sure you use a good quality marine grade clear resin also i used spray adhesive for the photos didnt seal them after just used resin on top . .

@AlumiliteCorporation 2 жыл бұрын

Great tips, glad you've found a process that works for you!

@MrCapttravis 11 ай бұрын

Thanks for the info!

@SP-po5qg 4 жыл бұрын

I like this and may use it as a coffee table with a flippable top. stamps on one side solid on the other.

@AlumiliteCorporation 4 жыл бұрын

That's a great idea! If you make it, send us photos! We'd love to see :)

@ccccen 3 жыл бұрын

Came out very nice I love it

@AlumiliteCorporation 3 жыл бұрын

Thank you!

@bc2725 7 ай бұрын

So a fine mist of Isopropyl alcohol will eliminate the need for a blow torch? Great tutorial. Thank you.

@laharijoshi3604 3 жыл бұрын

Awesome video and explanation! To the point and covering literally everything one would want to know! Thanks a ton ❤️

@AlumiliteCorporation 3 жыл бұрын

Thanks for watching, we appreciate the feedback!

@juliereberger3298 Жыл бұрын

Always wanted to do this

@sinner855 3 жыл бұрын

Beautiful work

@AlumiliteCorporation 3 жыл бұрын

Thanks so much! We're glad you enjoyed it!

@1456Sassy 6 ай бұрын

The photos don't have to be laminated first? I want to try doing a table top with family photos, including ancestor photos.

@deltas4114 4 жыл бұрын

I've been searching for a video that has this exact information, thank you so much. Awesome game board.👍

@AlumiliteCorporation 4 жыл бұрын

Happy to hear it! If you make one, definitely tag us in photos on social media!

@mrgixxxer 3 жыл бұрын

Great video. I was looking for some ideas on doing table tops & came across an excellent Christmas Gift idea.

@AlumiliteCorporation 3 жыл бұрын

Glad you found it helpful!

@kylekunert9373 6 ай бұрын

trying to epoxy inside a box. is it able to go up side walls? or should I start the sides and allow it to drip into the box?

@angelabehan2749 3 жыл бұрын

I have worked with resin on emblems,badges and such but I would love to try putting photographs on to slate and using the epoxy as the topcoat,I would love some tips or suggestions please,I was afraid that the mod podge or resin would distort the photographs but in your videos they look perfect,other videos show how to imprint the image on to wood,tiles etc I much prefer your method,love what I have seen so far.would love to see other ideas

@AlumiliteCorporation 3 жыл бұрын

Thanks for the awesome feedback! There are a ton of different ways to seal your photos, Mod Podge is a great one because it dries clear and the top coat of epoxy will fill in any streaks that a brush might cause! They also have a spray adhesion that could work as well - just make sure to do enough layers since it's a little thinner!

@graciemcgraw1433 4 жыл бұрын

If I wanted to add glitter or something to it could I just add it into the mix or is there certain glitter for resin???

@AlumiliteCorporation 4 жыл бұрын

You can add it right into the mix!

@ChrisJohnsonCJs-Kitchen 4 жыл бұрын

What a great idea!

@AlumiliteCorporation 3 жыл бұрын

We're glad you like it!

@funnypeoplerule Жыл бұрын

Is your table still in good shape? Has there been any bubbling, lifting, bleeding?

@mariselahernandez1731 4 жыл бұрын

Very beautiful !!!!

@elwoodanderson4149 Күн бұрын

Did the epoxy deteriorate any of the pics

@anabarron7228 4 жыл бұрын

I wanna do exactly this .. however I wanna add just a tad bit of glitter .. so it sparkles, and possibly some gold flakes . would the process be any different?

@AlumiliteCorporation 4 жыл бұрын

Nope, it'd be exactly the same! Just mix the two sides of epoxy first to ensure they're fully combined before stirring in your glitter.

@mzpchypchz 4 жыл бұрын

I was enjoying the video until I saw your kids playing my favorite game "Sequence".. then I was amazed. ...Not many know about this game.

@AlumiliteCorporation 4 жыл бұрын

Ha! Thanks for watching!

@fookyu3231 4 жыл бұрын

Love that game!

@mzpchypchz 4 жыл бұрын

The adult family version of course is my love. I never saw the small version. I'm sure its the same fun for kids.

@zackapan5062 Жыл бұрын

Nice work👍. I likeit

@msrankin1268 Жыл бұрын

Great video!! Question do i have to buy a heat gun? Someone told me i needed it for the bubbles but you didkt meation it.

@jlynne.7 3 жыл бұрын

Very informative thank you

@AlumiliteCorporation 3 жыл бұрын

Thanks for watching!

@jamesmaloney754 4 жыл бұрын

I want to try this on an old coffee table but with some baseball cards instead of photos. (Don’t worry they’re all cheap beat up modern cards). Most of them are pretty thin but some are a thicker card stock. Will the different thicknesses be an issue?

@AlumiliteCorporation 4 жыл бұрын

Hi James - it shouldn't be an issue as the epoxy is self leveling. If you do a pour, wait for it to cure, and notice it's still uneven, you can pour a second coat on top and that should do the trick.

@KL_real 2 жыл бұрын

James hi did you ever do the project I'm planning to you sports cards as well

@jamesmaloney754 2 жыл бұрын

@@KL_real yes I did. It came out great

@robertlindsey2734 Жыл бұрын

@@AlumiliteCorporation Hello, how long do I wait before pouring a second coat? I am also doing this project.

@wallyortizjr71 4 жыл бұрын

Awesome thank you for sharing your video

@AlumiliteCorporation 4 жыл бұрын

Thank you for watching!

@omarrivero818 4 жыл бұрын

Nice work. Thank your

@AlumiliteCorporation 3 жыл бұрын

Thanks for watching!!

@funnypeoplerule Жыл бұрын

Have you tried the new paper for the cricket machines?

@illegal4368 Жыл бұрын

Tight 🔥

@abmcd9381 4 жыл бұрын

Great vid. Ive got a couple questions. Is this safe to use on a table where food will be served, prepared etc. If water or a cold condensating glass is placed on the surface will it change color or opacity?

@AlumiliteCorporation 4 жыл бұрын

Great questions! Yes, our Amazing Clear Cast epoxy is FDA approved once it is correctly mixed and fully cured. As far as a cold glass - nope, you'll be all set!

@patrickgilpinjr.9444 2 жыл бұрын

I have a table with a small warp. Can I put an epoxy base coat, add photos after it cures, and the another layer of epoxy over top (sanding between)? I'm trying to level it out and cover the warp/damage with photos.

@AlumiliteCorporation 2 жыл бұрын

Yes, this should work!

@misamisa2677 3 жыл бұрын

using very strong tape like gorilla tape all around table eliminates dropping resin or drips so less resin is used. then remove tape and brush sides clean then wipe allow to complete dry

@AlumiliteCorporation 3 жыл бұрын

That's definitely another way to do it!

@chrisclancy6299 4 жыл бұрын

Nice job! Super helpful instructions, too. I'm trying to embed some letters into the surface of my desk. Would this Mod Podge + Clear Cast method work if the desktop surface has been stained AND sealed with polyurethane? Thanks.

@AlumiliteCorporation 4 жыл бұрын

Hey there! That's a great question for our technical team - go ahead and email info@alumilite.com for assistance!

@joshuavirgulto8259 2 жыл бұрын

How about it you were doing a workbench with a 4 inch back splash how would you epoxy the vertical piece

@AlumiliteCorporation 2 жыл бұрын

Because of the consistency and the fact that epoxy self-levels, you would need to lay the piece down so it's laying flat

@tia1033 4 жыл бұрын

Are these regular photo on photo paper? I tried to do this and the ink started to run 😩😩 I put like 2 coats of mod podge 🙃

@lodelcd 4 жыл бұрын

what kind epoxy? and were the two sides covered?

@AlumiliteCorporation 3 жыл бұрын

Yes, they're regular photos! You have to add a few coats of mod podge and let it completely dry first! If two wasn't enough then you most likely need more!

@pugnacioussaint2457 3 жыл бұрын

I mix mine with a drill bit with a popsicle stick at the end like a T then mix so fast and quick that it turns whote from bubbles to make sure its mixed well. A few project ruined because the epoxy was mixed well will change your mind.

@AlumiliteCorporation 3 жыл бұрын

When mixing epoxy it's always best to mix slowly so you don't introduce extra air! You can still achieve a well-mixed epoxy while stirring slowly!

@MrBojangles788 Жыл бұрын

Do you know if you could do this to an acrylic paint painting?

@AlumiliteCorporation Жыл бұрын

Absolutely!

@juliapoly 4 жыл бұрын

My table I have is rounded and I don’t really want to have the resin drip going down the sides what should I do?

@AlumiliteCorporation 4 жыл бұрын

Hi Julia! You could build up a "wall" around the edge of the table using a few layers of painter's tape or TuckTape and that should do the trick.

@Karla-xw2fr 4 жыл бұрын

You can cover the bottom with some masking tape and the droplets will adhere there so you can easily remove it after it’s completely cured.

@AlumiliteCorporation 4 жыл бұрын

@@Karla-xw2fr That's a great idea, Karla! Thanks for sharing.

@1991tommygun 3 жыл бұрын

Nice!

@AlumiliteCorporation 3 жыл бұрын

Thanks!

@humatif Жыл бұрын

Can we use torch to pop up the bubbles?

@starcassie8052 2 ай бұрын

Can I use quick coat epoxy in my molds...as long as they are 1/8th an inch? I bought it instead of the clear cast epoxy I usually buy...the boxes look the same😮

@AlumiliteCorporation 2 ай бұрын

Yes you can use it in molds just make sure to keep the layers thin so they don't over heat!

@starcassie8052 2 ай бұрын

@@AlumiliteCorporation ok tysm!!!

@theangrygamerazamatbagz6955 Жыл бұрын

My magazine pictures have all dried with wrinkles

@ZombieQueen819 3 жыл бұрын

Thank you so much this will help me a lot how do I care for the top with soap and water or anything special to clean this with??

@AlumiliteCorporation 3 жыл бұрын

Once it's fully cured for 7 days, you can clean it like you would any other surface: with soap and water, with a multi-purpose cleaner, etc.

@ZombieQueen819 3 жыл бұрын

@@AlumiliteCorporation thank you

@m27238 2 жыл бұрын

Great video, what kind of wood did you use?

@shelleyallen6346 Жыл бұрын

Is that gloss photos like from Walmart

@jeannieramsey7282 2 жыл бұрын

Is how many square feet of stuff that you use to do like a table

@kaleighmiller1850 4 жыл бұрын

I'm working on doing a project very similar to this and I have a question about the Mod Podge. How long did you wait for it to dry? On the container of Mod Podge, it says it takes 4 weeks to cure. If you did wait 4 weeks, do you have any suggestions for an alternate to Mod Podge that cures faster?

@AlumiliteCorporation 4 жыл бұрын

Hi Kaleigh - we used regular Mod Podge and just waited until it was dry to the touch, which is around 30 minutes.

@JenniPip 2 жыл бұрын

@@AlumiliteCorporation This was the answer to the only question I had, so thanks for addressing this! Great video!

@ccccen 3 жыл бұрын

I noticed you didn't use a propane torch or heat gun, was it do to you spraying the alcohol? I never heard of the alcohol spray method.

@AlumiliteCorporation 3 жыл бұрын

Lightly spraying alcohol will get rid of any bubbles on the surface but it can also cause problems so we typically recommend the heat torch or heat gun method!

@ccccen 3 жыл бұрын

@@AlumiliteCorporation I will stick with the torch :)

@reginaanderson9379 2 жыл бұрын

Do you think you Could do this process on a laminated kitchen island?

@AlumiliteCorporation 2 жыл бұрын

This is a great video idea!

@sundayromance7253 4 жыл бұрын

if you covered al four sides with a wall it would prevent the epoxy from rolling off.

@AlumiliteCorporation 3 жыл бұрын

Creating a mold box is another way to do this project! But we wanted the edges to be covered in epoxy as well so we used this method!!

@lukeevans3603 3 жыл бұрын

My question is..if u use it as a coffee table and dont use coster to keep ur cups or mugs..does resin start melting due to high temperatures of coffee or other hot food items???

@AlumiliteCorporation 3 жыл бұрын

The heat deflection temperature of Amazing Clear Cast epoxy is 130°F (which is when the epoxy will start to get slightly soft but return to normal once cooled) and the heat resistance is 400°F (which is when permanent damage can begin to occur)!

@lukeevans3603 3 жыл бұрын

@@AlumiliteCorporation thank you so much...

@IAmTheBlacksmithAndTheBlade 2 жыл бұрын

I'm sticker bombing my desk. Can I just apply mod podge to it and then leave it... or do I also have to apply the resin / clear coating to it?

@AlumiliteCorporation 2 жыл бұрын

That all depends on how you like the surface after letting the ModPodge set. If you want the most long-lasting effect, we would definitely recommend doing a top coat of epoxy.

@IAmTheBlacksmithAndTheBlade 2 жыл бұрын

@@AlumiliteCorporation Thanks. I ended up just using liquid polyurethane and just doing a couple layers of that. used a 236 ml can and it turned out pretty good! Thanks for your reply. next time i'll def try epoxy.

@gratefulzugore7383 3 жыл бұрын

I am making a small outdoor table using wood having tiles as the top. tiles are not always even so i wanted to clear coat over the top to protect it. Is this a good idea for outdoor and over tiles?

@AlumiliteCorporation 3 жыл бұрын

Hi there! Epoxy does yellow over time and that yellowing is accelerated by sun exposure, so we cannot recommend outdoor use. Coating tiles should be completely fine, however.

@blakely207 4 жыл бұрын

Im trying to make a coffee table with embedded bottle caps but it is humid in my garage. Would it be better to pour the resin inside or does the humidity not affect it to much? Also, do you have 30 minutes of open air time after the 3-4 minutes of stirring? Im afraid of feeling rushed and messing up 😅

@AlumiliteCorporation 3 жыл бұрын

This sounds like an awesome project! Humidity can definitely affect your projects! If you have a room/area in your home that has good ventilation then you could pour there, otherwise you may want to do a small test pour to make sure that the resin cures how you want it to. As for the worktime that typically includes the mixing time. If you don't want to feel rushed we would recommend making sure that you prepare everything beforehand so it's ready to go!!

@harshalishetty5158 3 жыл бұрын

Hi!I make dotmandalas on mdf boards...first time i will be using a laser print out pic n sticking it at the centre of d board and then dotting around it...planning to use your technique..but can i use a decoupage glue to seal the centre picture before pouring the resin over it?

@AlumiliteCorporation 3 жыл бұрын

Yes! You'll just want to make sure it's fully dried before adding the epoxy!

@mind2199 3 жыл бұрын

How's it holding up as far as wear and tear goes?

@AlumiliteCorporation 3 жыл бұрын

ACC holds up pretty well! If you do happen to notice scratches appear over time, you can just lightly sand the surface and pour another top-coat!!

@biancaoyervides5467 4 жыл бұрын

I have a question. I did a bar top and used wood glue to adhere the cardboard cutouts of the beer and used Famowood Glaze coat and it burned and rippled and got Yelp under neath. Any tips or suggestions? Please help

@AlumiliteCorporation 3 жыл бұрын

Thanks for the awesome quesiton! You have to be careful with which adhesion materials you're using because they can cause negative reactions with your resin. We don't know too much about Famowood so if you plan to use them again to re-do this project, we would recommend reaching out to their customer service for more advice!

@louielasdow5295 3 жыл бұрын

Can you use spray clear coat instead of Modpodge? I'm afraid the the Modpodge will cause streaking.

@AlumiliteCorporation 3 жыл бұрын

Yes you can! Just make sure it's fully dry before pouring your resin.

@sailenbarik8308 4 жыл бұрын

Nice video, and thanks for the detailed demo, but I have a general question for all selfie videos like this: "Is it possible to make one without the boring, robotic background music, like the one here: da-da-da-da, da-da-da; pa-pa-pa-pa, pa-pa-pa"? Anyway, thanks again.

@AlumiliteCorporation 4 жыл бұрын

Sailen Barik absolutely! If you watch some of our recent ones we’ve certainly updated. We do have a lot of older videos with this song in it. Sorry if it’s getting in your head!

@TheodorusRex 2 жыл бұрын

Did you treat/seal the bottom?

@royalpurple153 4 жыл бұрын

For the isopropyl alcohol, is there a specific percentage that is needed to disperse the bubbles? Or does it not matter? And the epoxy will self-level after the mist? I'm making a beer pong table right now, and I'm scare of messing the resin up after sanding and handpainting the table over two weeks

@AlumiliteCorporation 4 жыл бұрын

It doesn't matter, just don't spray too much! A very fine mist will do the trick (if it's clear epoxy, if you've added dye to the epoxy it'll create a cell-like effect with the dye). You could use a torch as well if that's easier than the alcohol!

@firedlake4165 3 жыл бұрын

Now Let's Say If I Wanted To Make A Table With All Of A Bands Records, Could I Use This Method Or Would I Have To Use Epoxy?

@AlumiliteCorporation 3 жыл бұрын

This method with epoxy would be a great option but it's not the only one - we recommend choosing the method that works best for you!

@firedlake4165 3 жыл бұрын

@@AlumiliteCorporation Thank You 😊

@sordidloam 4 жыл бұрын

nice vid, thanks.

@AlumiliteCorporation 3 жыл бұрын

Thanks for watching!!

@brendavanzant60 4 жыл бұрын

This is the first time I've ever seen alcohol suggested for popping bubbles. That doesn't cause any odd chemical reactions?

@AlumiliteCorporation 4 жыл бұрын

When it's clear epoxy - no! When the alcohol is mixed with dyes, it creates a kind of "cell" effect.

@deejaudible 3 жыл бұрын

I just did this and had never heard of the alcohol either. The spritz bottle i used spit out some alcohol droplets that caused huge divots that never leveled out. I spritzed at 45 minutes. I had to use a heat gun and a brush to get them out. I'm currently waiting on the results now...

@AlumiliteCorporation 3 жыл бұрын

@@deejaudible This is definitely one of the difficult parts of using alcohol! If you use too much or the droplets get too big, they can cause dimples to form! Heat guns and torches are other great alternatives and have potential to cause less damage!

@joetashaplummer1567 3 жыл бұрын

Just subscribed ‼️ great video 😍😌 I wanted to create a similar project where I add my photos to a J shaped wood. But I have a question, can I use printed photos instead??

@AlumiliteCorporation 3 жыл бұрын

Yes, but you'll want to make sure to seal them with something so they don't bleed when you pour your epoxy. To seal them you can either use multiple layers of Mod Podge or you can use tape or another form of lamination.

@joetashaplummer1567 3 жыл бұрын

@@AlumiliteCorporation Thank you so much for the reply I really appreciate it😌

@lauramargason7721 3 жыл бұрын

Is there a "rule of thumb" for the amount of epoxy one will need for a certain size board? (i.e. 1 oz per square inch?) I was wondering how much I need to buy for my two projects. I don't want to buy too much (because $$$) but enough so I don't run out.

@AlumiliteCorporation 3 жыл бұрын

That's a great question, Laura - big projects like these can get pretty pricy so we understand wanting to buy only what you need! We actually have a really great surface coating calculator on our website that I'll link here for you, but a general rule of thumb when using Amazing Clear Cast is 1 gallon per 13 square feet (the website breaks this down a little better so definitely check it out)! www.alumilite.com/applications/surface-coating/#surface-coating-calculator

@mikeperkins4877 2 жыл бұрын

Can you do this over a paint

@ShesSoRandom 4 жыл бұрын

I would have used heat gun or torch but that's just me :)

@AlumiliteCorporation 3 жыл бұрын

Those are both great ways to get rid of bubbles!! Lightly spraying alcohol just happens to be another!

@mehtajay17 4 жыл бұрын

Hi.... this is a great video!! I would like to do similar steps but using my stamps collection on my old glossy finished wooden table (from ikea).. will the same steps work for my requirement? If not - do you have a video for stamps? Thank you!!!

@AlumiliteCorporation 4 жыл бұрын

Great question! Yes, the same steps will work with stamps! Definitely show us the finish product, we're excited to see it!

@Heidipeidi 3 жыл бұрын

Can you say anything about how thick the epoxy resin layer was? I’m trying to calculate how much I’ll need.

@AlumiliteCorporation 3 жыл бұрын

We actually have a super handy surface coating calculator to help you figure out how much resin you'll need! Try it out here: www.alumilite.com/applications/surface-coating/ It's about 3/4 of the way down the page!

@cameron8438 4 жыл бұрын

I'm currently making a project like this with posters on a desk, I've followed all of the instructions exactly and everything is going well so far. I had built a tape "wall" around the edge to make sure the resin didnt drip down and I just peeled it off (the resin has been sittting for about 2-3 hours). When I peeled the tape off some of the resin came with it and now the sides are quite lumpy and bumpy. I was just wondering - can I sand down the sides to make them more perfect, and if so, how long into the curing process should I do so? Thanks

@AlumiliteCorporation 4 жыл бұрын

Yes, you can sand down! Just wait for it to cure, at least 24-48 hours. Then if need be, you can do a new clear flood coat over top.

@lodelcd 4 жыл бұрын

Hello, I'm trying to make a table using epoxy glass & posters to protect the posters from the epoxy would you suggest gloss mod podge or matte? how many coats should I give the posters with the mod podge?

@AlumiliteCorporation 4 жыл бұрын

Hal hey there! Great question. A solid coat of mod pudge fully dried will do the trick. Make sure you’ve coated then whole thing well. You could do it twice to be super safe but one will do. Send us a photo when you have it all done!

@kathidy1 4 жыл бұрын

Can this be used for a dining room table, would possible heat from bowl destroy it? Would postcards be too thick? thanks.

@AlumiliteCorporation 4 жыл бұрын

Hi, great question! I don't think postcards would be too thick. If you set a hot pan on the epoxy it would soften, but a bowl or mug with something hot inside will be ok!

@misamisa2677 3 жыл бұрын

how did you heat resin?? not all products can be microwaved

@AlumiliteCorporation 3 жыл бұрын

You can put your bottles in a warm water bath for 10-15 minutes before measuring and mixing - this helps a lot with getting rid of bubbles!

@keeganhart5431 4 жыл бұрын

AWESOME

@AlumiliteCorporation 4 жыл бұрын

Thanks for watching!

@davidhazen2394 4 ай бұрын

LOL you don't have to have it run over , just put tape and let it cure for a while. Then before pulling the tape cut the line so the tape does pull of finish

@monicaperry8663 3 жыл бұрын

I want to do this and I am so nervous about doing the resin part. 🙏

@AlumiliteCorporation 3 жыл бұрын

You've got this - everyone starts somewhere. Just take is slow, wear PPE, and work in a well ventilated area!

@sew742 4 жыл бұрын

Is the possible to be done on a floor surface or even a wall?

@AlumiliteCorporation 4 жыл бұрын

Yes, it is possible for a floor surface! A wall would be trickier because the epoxy wouldn't be able to self-level, it would just pour down. Feel free to check out our volume calculator (www.alumilite.com/store/pg/12-Volume-Calculator.aspx) to know how much product to use for a large project and send us an email at info@alumilite.com with any questions.

@sew742 4 жыл бұрын

@@AlumiliteCorporation thanks! I'll check into that!

@barryfriedman3223 4 жыл бұрын

what is the benefit of the hodge podge? can the pictures simply be glued to the wood using elmers?

@AlumiliteCorporation 4 жыл бұрын

It's to seal the photos so that they don't change color over time. Modge podge works a touch better than normal glue in our experience.

@cherylfonseca1218 4 жыл бұрын

I make my own mod podge using Elmers glue and water. kzfaq.info/get/bejne/mpOGeKuUu525gnU.html

@danielnguyen7842 3 жыл бұрын

I got my print outs from Walmart. Your pictures dont bleed or get ruined at all with the mod lodge or resin? That’s my biggest fear. Just asking before I do my craft tomorrow

@AlumiliteCorporation 3 жыл бұрын

As long as you seal the pictures with modpodge first, the resin won’t interact negatively with them!

@ladythrunder 4 жыл бұрын

I put the pictures on and put a light coat of mod podge on it didn't dry clear what can I do my pictures are smudged please help

@AlumiliteCorporation 4 жыл бұрын

I'm so sorry to hear that! Please email info@alumilite.com for further assistance - it's very helpful if you have photos to send in your email as well!

@ladythrunder 4 жыл бұрын

@@AlumiliteCorporation thanks so much for getting back to me I haven't resin it yet, will the pictures become clear afterwards

@che1925 9 ай бұрын

is this being placed on MDF board?

@AlumiliteCorporation 9 ай бұрын

I believe that is a nice piece of ply wood but you can definitely use MDF its just a little heavier.

@habibaumme9553 3 жыл бұрын

Which type of color we can use on wood that doesn't smudge?

@AlumiliteCorporation 3 жыл бұрын

Hey there, we're not too sure what you mean. Reach out to our technical services team at info@alumilite.com with more information on the project you have in mind and they should be able to help answer any of your questions!

@dankonrad81 9 ай бұрын

So the mod podge seals the photo ?

@AlumiliteCorporation 9 ай бұрын

yes it protects it

@darlenedugan7342 3 жыл бұрын

Do you the actual pictures or photo copies of the pictures

@AlumiliteCorporation 3 жыл бұрын

You can use either! You just want to make sure to seal the photos really well before pouring your epoxy so the colors don't bleed out of the images!

@gmoney8087 3 жыл бұрын

Can you use poly acrylic to seal copies under epoxy instead of mod podge

@AlumiliteCorporation 3 жыл бұрын

Great question! If it is something that off-gasses like a 3M sealer, then we definitely wouldn't recommend using it - the off-gassing will cause bubbles and a terrible cure.

@gmoney8087 3 жыл бұрын

@@AlumiliteCorporation thanks for reply.