Thanks for posting, especially enjoyed the plant construction slide show at the end! Roy Lewis Atlanta, Georgia USA

Never seen like this plant , working in aluminum extrusion for 5 years in Gulf region. This is the best i've seen

Gotta admit, the video you guys put in the beginning which seems like your companies main presentation video is extremely well done and appealing. one of the best I've seen ever.

I worked as an electrician in a plant like this (Alcoa). I worked on all that equipment, troubleshooting faults, etc. That plant is a lot cleaner than the one I worked in.

MEU MARIDO ERA SUECO TRABALHOU COM ALUMINIO NO MUNDO TODO ALCOA E ELUMA ERA FANTASTICO CONHECIA TUDO DE ALUMINIO,NO MUNDO TRABALHOU NO JAPÃO ,MALASIA,KUALA LUMPUR, CANADA, EUA, COLOMBIA, AUSTRALIA ETC.... ABB E UMA FIRMA SUECA TAMBEM ,ERA UM GENIO !!

What a huge factory! Awesome Aluminium Processing :D

It would be my 3rd night working in an aluminum extrusion plant. I'm completely new to it since I've worked as an overnight stocker previously and do computer work. Definitely different kind of work than I'm used to, but I find it interesting. Still learning though.

man that place is CLEAN, good vid

I worked for RD Werner from 1990/1996. I was a Die chaser. LOL. Thing's have changed. Nice & clean. The guy loading the die was in no hurry, we changed in under 60seconds. Caustic rooms sucked. Good job though. Good experience.

@Skitad the process at 1:50 is the extrusion. The ram (big rod) pushes the billet thru the die, creating whatever shape the die is. I should know, i run one of these presses for a living!

I never imagined it would be a cold extrusion. Is that possible with delicate profiles?

Automated equipment everywhere and not a single person wearing safety glasses. Niiiiice.

This would be an amazing thing to watch if the process were actually explained.

wonderful production line! great!

100 % Perfect equipment and layout for profile .

Even for 2010 that music was a vintage early 90s batch of tracks.

I love cutting on the fly. I wish my press would do the same

I don’t miss the burns AT ALL!

I have an engineering question. If I lay (3) 48x4x.25 strips of aluminum 6 inches apart and screw them in deep and well on 1 inch overhangs on each end will that support 500lbs? It's okay (actually preferred) if they bend a little .

Well done ,good job.

Yo operaba una extrusora así...una 2.800...hay cosas q corregir ahí.falta el gasificado,pronable burbujas d aire si no lo activa ,estirador libera mal.y la cierra corta muy poco las puntas.es probable q la primer camada salga doblada esas puntas...humilde opinion.

Why is a front Loading System better than an back Loader? Can you explain please?

Alumex Limited is doing same process in Sri Lanka. nice to watch.

Me gusta ver los video como se fabrica las percianas con robot yo tengo una pequeña fabrica pero manual y taladro, pero se llega con sacrificio

Those jobs are fun I work for Universal alloy I was a press operator but know iam a billet shaver.

0:01 to 0:30 just makes me want to listen to the Bigger Pockets PodCast

It was cool seeing the factory itself being put together towards the end of the video. It looks like a massive capital investment. It must take a lot of extrusions to pay off the cost of all that equipment and those dies.

I used to run a 9" SMS SUTTON in Auburn, Indiana!

it is too nice video ,Fully automatic,fantastic industry and plant

Man i wish my press was as high tech as this! We have alot more manual work to do. This machine does everything on its own!

Wow, big projector

That’s perfect good job👍

This is the front loading system. All new modern presses are working with this system of illet loading today.

Simply perfect ! We are die casting factory in China!

Always wondered how this works. So am I right in saying they heat up the aluminium so it's soft but not melting and then push it through the die like play-doh? Is that it?

clearly production line

Where are you guys located? And who do you buy your tool steel from?

I could say about how much it costs the crane cut profile please?

How is the extrusion straightened? It looked very wavy at the ends, but someone appeared perfectly straight in later shots.

Thanks for showing extrusion process. It is a good videos.

مرحبا بكم ف قناة ديما الجديد إن شاء الله

nice press. what size is it. I have worked on a P15, P38 press here in South Africa. We are still using induction billet heaters. Old Technology!

I use to run a 7" ube press with granco clark running gear. Awesome job but shit pay.

VERY GOOD ROLLER WATCHED IN ONE BREATH.

That is extrude process. Press billet through die(mold).Then according to the die(mold) extrusion profile produce. :)

muy bien

Thank you very much

Bon courage

I wonder how to make a hole in the middle

bonsoir,svp comment elle s'appelle la machine qui fabrique " baguette de finition carrelage" merci

thx for showing this video. how much is the extrusion machine in USD?

imagine back in the 40's, every automated parts would've been a German guys ,

Thanks for sharing

how much do u guys pay for a stretcher starting?

Lol at the guy un-banding GIANT INGOTS without safety glasses.

very nice

Sehr interessant

tem uma extrusora tecalex aonde eu trabalho

عمل منتاز مع شركة السندان الذهبي

How much did the plant cost?

I don't understand how there can be a hole in the middle of the extrusion. I'm missing something.

Disculpe con ustefrs puedo encontrar perfiles de aluminio de diferentes colores Para ventanas ?

This is the first time I've seen what the aluminium extrusion plant is like. That reminds me of Galuminium's aluminium extrusion.

Anyone can tell me where i found this machine

lovely

I work as a presse operator in algeria and i am looking for a job opportunite un Europe in the same domaine

I wish they had that ,When I worked in extrusion, we had to do everything using the back,and the heat in the summer was a killer.

Very nice

Is there any scope to know the capacity and the minimum space required to set up the same plant in Bangladesh

Hllo.jie

capacity?

Graet.thamks

sou de natal como posso compra o catalago

MSGC GROUP CHINA , somos una fábrica de China ,producímos las prensa de aluminio.

i am working like that work with machin of aliminium

What is the temperature of existing rod before extruding?

J'aime travail ici

Prezado Hernane, Estou em Brasil, eu posso te ligar? Atenciosamente, Cosme Galceran - Tecalex, Responsable del SAT

Quien vende este tipo de maquinaria??

Yo trabajo en una compania de esas de aluminum

I am looking to designing a railway tank using aluminium extrusion as a material,, how big the size is available. secondly, are they available in angle, as a tank construction would require,,,!

onde fica essa empresa

Góod

Here is Aldis Bai working in China Zhongwang Aluminum Group. It’s so honor to introduce Zhongwang as the top 2 manufacturer of aluminum extrusion profiles in the world since 1993, we have the most advanced equipment and technical staffs to produce various kinds of aluminum profiles used for many fields, especially auto industry. Detailed products: ● All kinds of Aluminum extrusion profiles according to your requirements or design drawings. ● Special vehicles with aluminum body- trailers, oil tank truck, containers, fire truck ● Standard profiles-Square tube, Round tube, Round bar, Flat bar, Angle, U-profile, T-profile, I-profile Any inquiry or technical question, welcome your email to me at aldis@zhongwang.com I’d like to try my best to help you! Thanks!

How does the 'stretching' affect the QC and dimensions?

c est parfait

@adriano47470 voce é vendedor ?

Wow

Certainly some room for improvement

hi-tech machine...

Bhaii mall Lena h kitna rate h or kaha se sasta milega plz rply bro..

How do you extrude something with a hole in it

To whom we may contact?

Hanzhen harmonic drive gear , robot arm gear , gear joint , over 30 years experience ,

how much is such plant?

cara impressionante a precisão do processo, tem contado no brasil pra aquisição de um equipamento deste?

What about no metal to metal contact??? Customers don't like there parts all scratched and dinged up, and no company wants to run so much scrap just because its "faster"

Rifaj Enterprise

I seen a Mexican guy get caught in the press when I worked in extrusion, it was not a pretty sight, I worked on the saw and it took to long to shut the emergency button off.

trabalho numa empresa que fabrica tarugos de alumino para extrusao o nome dela e metalex empresa da votorantim metais fasemos tarugos de4,5,6,7 polegadas de varias ligas