Amazing Technique for jigsaw circle cutting jig

Рет қаралды 114,254

4 жыл бұрын

With this jigsaw circle cutting jig idea you DON'T have to drill a hole to insert the jigsaw blade to cut the wooden circle. So, with this woodworking idea we will cut perfect wooden circles with no marks in the edge. Cutting circles with a jigsaw is quite easy, and making a woodworking jig to cut circles is also very easy, and now, with this woodworking technique those wood circles will have a perfect and clean edge.
A similar woodworking trick also helps to cut a perfect oval (watch this video in my new channel):
• The jigsaw circle jig ...
More videos about woodworking and DIY with wood in my channel 😃.
Subscribe and hit the bell:
/ @woodworkingwithdiytools
The wood circles are even better than the ones I cut with my table saw circle cutting jig:
• Table saw circle jig
Or with my jigsaw table circle cutting jig:
• Circle cutting jig for...
Also, see how to make a simple woodworking jig but with a very interesting trick to cut circles with the jigsaw. In my new channel:
• Video
More woodworking projects in my channel and in my woodworking blog: enredandonogaraxe.club/en
You can also subscribe my woodworking and DIY channel.

Пікірлер: 135

@danr1920 4 жыл бұрын

I often don't have the "ideal" tool for the job, and have to come up with something that works as good and even better. Saves money too.

@binkhalifa2004 8 ай бұрын

I wish I found your video before I bought a 9-inch hole saw for my subwoofer project. I already have a jigsaw and didn't know I could cut a perfect circle of any diameter, wow! Thanks for sharing! 😁

@CR-xl7zu 3 жыл бұрын

The radius guide is an old trick. I use one with my router to cut large circles. The entry trick is new to me, though. For cutting an inside circle, put the temporary screw between the radius center and the blade. You'll need to drill a hole to start the cut, but it will be clean, just like his outside cut.

@JoeMcLutz 4 жыл бұрын

Very good job! Brilliant!

@randomscandinavian6094 4 жыл бұрын

This is ingenius!

@stevebrighton42 4 жыл бұрын

Nicely done, thanks for sharing.

@angcrivellone 3 жыл бұрын

Beautifully executed my friend! Very clever! TYFS! 💘💘💘

@visa1960 4 жыл бұрын

Fantastic!!!!!

@themistermax Жыл бұрын

Ten thumbs up! Great idea!

@migmagingenieria 9 ай бұрын

Great hack!! Thanks for sharing!!!

@thiesdewaard334 Жыл бұрын

Very smart entry trick - thanks for the idea!

@donaldadams1644 2 жыл бұрын

Just what I needed. It works a treat so well done. Don Adams

@georgequalls5043 4 жыл бұрын

Ver smart. I would not have thought of this technique.

@davidrobinson422 Жыл бұрын

just brilliant - would never have thought of that

@abujassim8509 4 жыл бұрын

Very clever idea👍

@mcongmail7278 3 жыл бұрын

Thank you! This is a great idea.

@sawdust58 4 жыл бұрын

Thanks for sharing, nice idea.

@Edmorbus 4 жыл бұрын

Thanks for sharing

@creamdoormusicschool1642 4 жыл бұрын

Thank you teacher

@JohnColgan. 3 жыл бұрын

Great process, looks like you can reglue the outer ring with an invisible joint too

@fontybits 4 жыл бұрын

Beautiful! I have not seen a BETTER idea than this for cutting circles. I planned to make 3 side tables with circular tops, so now I have the best solution. Thanks. SUBSCRIBING!

@WoodworkingwithDIYtools 4 жыл бұрын

Thank you very much 😃. Soon I will also cut wooden circles with a bevel in the edge 😃

@escapegoat3472 4 жыл бұрын

Great idea.

@collincourtois8587 4 жыл бұрын

Brilliant video. Thank you very much.

@tomlagatol4448 4 жыл бұрын

Very cleaver indeed...thanks

@NOLAMarathon2010 4 жыл бұрын

Very clever!

@MrMoffett82 4 жыл бұрын

Excellent job great idea

@richardparoline6781 Ай бұрын

This is perfect since all I have is a jigsaw. Other videos show routers, etc. which I don't have. You came up with a simple technique.

@johncollins8304 Жыл бұрын

Ingenious!

@dougcross8609 3 жыл бұрын

Thank you. I just used this for the first time I ever cut a circle. It saved me so much trouble.

@WoodworkingwithDIYtools 3 жыл бұрын

Thanks for your opinion after using this trick :)

@gerrygolder7537 4 жыл бұрын

Good and simple works well

@debstone4973 4 жыл бұрын

So smart. Thanks

@herberar 6 ай бұрын

Great!!!

@vimabete1 3 жыл бұрын

BRAVO

@Jasmine-se7bs 3 жыл бұрын

Good Job!

@droneshot4242 2 жыл бұрын

Clever entry technique - nice work!

@WoodworkingwithDIYtools 2 жыл бұрын

Thank you very much. Did you watch how I use something similar to cut a bevel in the edge of a wood circle using the jigsaw?

@michaelmcnally 3 жыл бұрын

Wonderful idea! I am going to try this right now. Thank you.

@WoodworkingwithDIYtools 3 жыл бұрын

Thank you. In another video I make a better jig to cut perfect circles with perfect vertical cut in the edge of the wood :)

@jayakumarmg5270 9 ай бұрын

Great .. thank you...

@DabhandVindy Жыл бұрын

I do not have a router yes so this is perfect! Thank you so much

@jromhek2070 Жыл бұрын

Brilliant .

@userMarinainCol 11 ай бұрын

Thank you very much. I am going to try this.

@crafter2u 4 жыл бұрын

nice idea

@marouaneladjel1907 4 жыл бұрын

nice thank you so much

@gurudev2167 3 жыл бұрын

Good job👍👍👍👍👍 amazing idea 🤜🤛

@Bill.L.Carroll 4 жыл бұрын

That's a brilliant tip, mate 👍🏾 Cheers for sharing.

@WoodworkingwithDIYtools 4 жыл бұрын

Thank you very much Bill 😃

@clemmcguinness1087 4 жыл бұрын

Nice work

@sajadwoodwork 4 жыл бұрын

Very good sir I am it fan

@xzzdm 3 жыл бұрын

This is brilliant! It makes a perfect circle! Way better than drilling a pilot hole to insert the jig saw blade.

@WoodworkingwithDIYtools 3 жыл бұрын

I agree 😁👍

@AtlisWerks Жыл бұрын

Great video mate.

@neilatkinson7259 4 жыл бұрын

Awesome and simple = 2x awesome! Great vid.

@WoodworkingwithDIYtools 4 жыл бұрын

It is great when one finds a simple idea that works great 😃😃😃

@hooptastic_hippie8522 3 жыл бұрын

Genius

@junchavez1078 4 жыл бұрын

Clever guy

@ianwatkins3002 3 жыл бұрын

Cracking! Just used this to cut a circle and it was spot on. Thank you!

@gzorg 3 ай бұрын

Thank you.

@Know-Expert 3 жыл бұрын

Simple and effective, new sub.... Know Expert

@billdodson5703 4 жыл бұрын

This is brilliant, as all your ideas are. Thank you!

@prabup5568 3 жыл бұрын

Super

@honkynel 3 жыл бұрын

Even the offcut looks super useful. Imagine putting the second screw at the 4 cardinal points you would have some nice cams or spacers!

@WoodworkingwithDIYtools 3 жыл бұрын

Now I remember something. Thank you :). Coming soon

@hassanal-mosawi6049 4 жыл бұрын

thanks for sharing that

@WoodworkingwithDIYtools 4 жыл бұрын

Thanks for watching 😃

@robertrivera3863 3 жыл бұрын

Amazing! Thank you I am about to try this to replace rounds on my barstools. Thank you for making this video. New sub!!!

@WoodworkingwithDIYtools 3 жыл бұрын

Thank you very much Robert. You can also watch the new version in my channel

@user-on2zy1sh4b 8 ай бұрын

Вот знал , что надо как то подвести пилку к кругу , теперь все понял , большое спасибо за идею .

@colincooper2360 4 жыл бұрын

You are a genius mate, you think outside of the "box" i like that well done.

@mysteryunwrapping9518 4 жыл бұрын

Me like

@enyongism 3 жыл бұрын

Im surprise how clean the cut was. What blade did you use?

@Kicknback 2 жыл бұрын

By far I think this is the best cutting a circle I have seen. Thanks - How did you attach the jigsaw?

@joshuad6750 3 жыл бұрын

How do you set the jig saw in the board like this?

@Pete.Ty1 4 жыл бұрын

👌😊👍

@mrb4408 4 жыл бұрын

Very clever Sir..

@joen3812 4 жыл бұрын

Brilliant!

@imanhussein4177 4 жыл бұрын

Excellent! This never occurred to my mind. Thank you so much!

@jhellier 8 ай бұрын

This is great! I saw another video that used coat hanger wire instead of wood but your method looks even more reliable 👍 I am trying to decide whether I need a circular saw to cut straight lines in 12mm mdf (200 to 500mm cuts). Is this doable with a good "budget brand" jigsaw? Could the same jigsaw be used to cut 11cm circles in 3mm mdf (with fine tooth metal blade)?

@yurialtunin9121 4 ай бұрын

You can also cut internal circles if your new pilot screw in between main screw and jigsaw. But you need to drill a hole.

@simonvaughannikon 4 жыл бұрын

Simple yet ingenious. I’ll use this myself. Than you!

@danieldibiaso9342 4 жыл бұрын

So simple yet it is amazingly accurate.

@sapelesteve 4 жыл бұрын

Now that is a brillant solution & certainly an out of the box idea! Nice work....👍👍😉😉

@gordonrogers4616 3 жыл бұрын

much better way to start without leaving a notch on the circle

@WoodworkingwithDIYtools 3 жыл бұрын

Yes, that was the idea. I wanted to avoid that notch in the edge of the circle :)

@Armin_alter_Mann 8 ай бұрын

genial, Gruß Armin

@APirateNamedJohn 4 жыл бұрын

Nice! now i need one to cut and keep the outside circle.

@WoodworkingwithDIYtools 4 жыл бұрын

Same principle, but not as easy. I am making some test already 😃

@APirateNamedJohn 4 жыл бұрын

@@WoodworkingwithDIYtools i am excited to see the video

@JoseSilveira-newhandleforYT 3 жыл бұрын

Very clever, even brilliant solution! Thanks for posting it!

@TroodosPoolGuy 4 жыл бұрын

Great idea, many thanks for sharing this!

@billandersen8036 3 жыл бұрын

I like that awsome i made a lazy susan and all i have is a skilsaw jigsaw and a sander i can see a small wobble i was thinking of securing my sand and the susan to the bench and just spin it till she's round

@AndreiIR000 4 жыл бұрын

Very, very good idea!!! Thank you!

@CitizenAyellowblue 4 жыл бұрын

That’s really clever thinking!

@markduggan3451 4 жыл бұрын

That will certainly come in handy. Thanks.

@LitoGeorge 4 жыл бұрын

10/10 on all fronts 👍👍👍

@philipellis1865 4 жыл бұрын

Great idea thanks I'll have to try that! Thanks 👍

@donaldemmerling9622 4 жыл бұрын

What a great mind!

@didierliveris2483 4 жыл бұрын

Une très bonne idée, Monsieur 10/10

@steviemarchantswoodshop3279 4 жыл бұрын

A perfectly serviceable jig, better than what I've been doing

@TheMrWoodsman 4 жыл бұрын

You are a clever guy. Thank you.

@craigcowley7560 4 жыл бұрын

That's great. Off in the garage tomorrow to make one

@stu-po 4 жыл бұрын

This is brilliant! It looks like that outer ring is a clean cut and can easily be glued back together. That makes me think that by tilting the blade fo 45-degrees this could also be a jig to make a bowl from a board. I'm never comfortable cutting 45-degrees on a band saw.

@WoodworkingwithDIYtools 4 жыл бұрын

You must be reading my mind. I already have in my channel a woodworking jig to make 45 degrees cuts with the jigsaw. I will mix it with this one to cut wooden circles with a 45 degrees bevel, maybe to make a fancy round table 😃

@ESLinsider 11 ай бұрын

How did you make the jig on the jigsaw?

@SAHBfan 4 жыл бұрын

This is clever! But I think it could work for holes as well? If the extra pin was placed between the main pivot and the saw, the saw would swing inside the circle instead of outside. Using the same ‘line up the line’ technique and switch pins should then give you a perfect hole?

@WoodworkingwithDIYtools 4 жыл бұрын

I am already making some test 😃. Actually, as soon I I have cut the wooden circle in this video, I began to try to cut inside circles. In advance I can say that tight curves can cause a lot of burning

@troydowns7748 2 жыл бұрын

Thank you, you just saved me from having to try and convince my wife to let me get another expensive tool.

@walrod622 4 жыл бұрын

That it's a great idea

@mymido4322 4 жыл бұрын

Bravo, clever ideas 👍👌👏😀 well done.

@oaroar3956 10 ай бұрын

I tried to repeat this method but ran into problems with the jigsaw blade being deflected by the curve or the circle (I was trying to make a smaller circle as per the above video)... The jigsaw never got to bite into the wood... I had to cut it out by hand and eye on a bandsaw. Disappointed that the above method did not work for me. Any type of special balde being used? Angle of attack? Maybe a square board would work better, I imagine once the blade is into the wood and following the curve it would do the job. Thanks for the video....