Amazing tool idea ?? unique handmade hose clamp

Рет қаралды 167,937

5 жыл бұрын

Welcome to our channel
"Creative Tool Mistry"
USEFUL tool for your home will help you tight wire on pipe in easy way. Hope you will enjoy and idea will help you.
Our channel including of guiding videos:-
- Life Hacks
- DIY Projects
- How to Make
- New and Awesome Ideas
- Homemade Tools
- Tips and Tricks
- Experiment Videos etc.
Dear Friends,
We can't succeed without support of your passion. Hope you enjoy our channel. Please don't forget to click Like, Comments, Share and Subscribe.
--------------------------------------------------
Our Popular videos link :-
• Amazing Tools idea ?? ...
• Amazing Handmade Inven...
--------------------------------------------------
WARNING !!!
Dear Friends ! Our videos are provided only for entertainment and watching purposes only. So don't try to repeat everything you see in our videos. Entertain yourself but always be safe and take care of your health.
----------------------------------------------------
Thanks for your Love and Support,
Creative Tool Mistry

Пікірлер: 73

@Superkuh2 4 ай бұрын

Easily implemented with only hand tools. Nice! By far the simplest design I've seen.

@prasetyo-dp6ly Ай бұрын

Simple dan material mudah dicari

@harmindersingh7833 4 жыл бұрын

Cheap and best ideas sir

@necyescalora1312 3 жыл бұрын

Simple and easy!

@user-sz9ir5dn5h Жыл бұрын

Mantap ide yg bagus aku coba du, terima kasih juragan atas postinganya semoga banyak lg canel2 berikutnya yg menambah pengalaman kesemua yg memerlukannya.

@PastorPalaciosMartinez 3 жыл бұрын

Sin ninguna duda esta es la mejor y más sencilla idea para fabricar el famoso hose clamp, felicitaciones. Without any doubt this is the best and simplest idea to make the famous hose clamp, congratulations

@karunathilakaabeysekara8642 Жыл бұрын

Thanks

@elalquimista9357 Жыл бұрын

Buenísimo, mas que sencillo, lo felicito y gracias por compartir sus conocimientos !!! Un abrazo 👏👏👏

@travelwithpramod6863 3 жыл бұрын

Simple & neat design.

@selftaopath 9 ай бұрын

This is the best. Simple and easily found hardware. Thank you. I subscribed b/c of it.

@bruceg1845 3 жыл бұрын

simplest design yet - good job

@zfolwick 2 жыл бұрын

I like when content creators use the most basic tools instead of several expensive tools to make a tool. I have the opportunity to say "oh if I used my XYZ tool, itd be easier!

@manuelgarrido5602 9 ай бұрын

The simplest I have find. Tx.

@gdsstudio974 11 ай бұрын

Out of all the variations of this tool, I choose this one to build. The turning nut in the location that it is, makes it difficult to advance the rod with a open end wrench. I used a larger diameter washer, 3/8 bolt and the nut took a 5/8 wrench to turn. I would suggest using a ratchet wrench. I didn't have one that size, but I'm sure it would function a lot better than the open end wrench, which barely fit. I built another one using 1/4/inch bolt. The nut is 7/16 wrench size, which is easier to work with. A ratchet wrench is still recommended, but not necessary with this size.

@mariochavez6576 2 жыл бұрын

la mas simple erramienta funcional para apriete. Te sacaste un 10 👍

@plastikhitam2623 9 ай бұрын

Sangat praktis mudah dimengert trimakasihbanyak tidak berteletele

@ezequielsaucedo260 3 жыл бұрын

Thank you! Your video is the one I like the best. Simple and effective.

@The_Joker_ 3 жыл бұрын

Genius level 100 acquired. 👍

@user-ti7on5uv9h Жыл бұрын

Bingo! 🤟 🇹🇭

@viswanathanramakrishnan7613 4 жыл бұрын

Super and simple tool to tighten the hose with wire.This is what I was looking for .Kindly post such simple tools for home use. Kudos. Keep it up.

@omkarahi 5 ай бұрын

Great brains produce simple solutions for complex jobs. Really brilliant design.

@CreativeToolMistry 5 ай бұрын

Glad you like it!

@antoniodorivaldasilva1308 Жыл бұрын

This idea I liked, congratulations I'm going to do this

@user-sk6op2tq9j Ай бұрын

Good

@CreativeToolMistry Ай бұрын

Thanks

@FAUZIAKBAR89 2 жыл бұрын

Kreative tanpa batas 👍👍🤝🇮🇩

@fasdm 3 жыл бұрын

Nice job. I just invented a similar tool, independent of your creation. I used a 4" long, 1/2" bolt. I ground down the end of the bolt to a taper before cutting the slot.

@smoxen 3 жыл бұрын

Finally - a simple and effective (and cheap) hose clamp tool !!!...Thank you so much...Just subscribed !!

@Howie47 2 жыл бұрын

I watched maybe 10 of these DIY videos. Yours is the easiest and simplest. Which means the best. On Amazon some want as much as 100 dollars for this tool!

@Larsanator 3 жыл бұрын

Dude, use a wingnut in place of washer/nut which will twist the ends for a clean snip and fold.

@1ofhis518 3 жыл бұрын

AWESOME

@mekanikobisdak4490 3 жыл бұрын

Very nice video

@yt1234567100 2 жыл бұрын

thanks. I made one like you. Genius!

@mrsunyofficial 5 жыл бұрын

nice video

@CreativeToolMistry 5 жыл бұрын

Thanks dear

@MrRockydee07 3 жыл бұрын

This is great , I also wrapped some electoral tape around it first , it helps to stop cutting into the hose when it expands.

@jyotideol3202 5 жыл бұрын

good job

@Christian-uc2qi 2 жыл бұрын

Honestly, for how often I need a Clamptite type tool, this is the simplest, most cost effective tool. The KISS principle at work - Keep It Simple Stupid (KISS)!

@adilsonribeiro1183 2 жыл бұрын

Maravilhoso!! Deus te abençoe com muita saúde e sabedoria.

@makenchips 2 жыл бұрын

Pretty good I would have used a fine-tuned 5 degree ratchet and made the washer a plate

@sahildeswal6371 5 жыл бұрын

Good job sir

@CreativeToolMistry 5 жыл бұрын

Thanks dear

@beritahuterkini324 3 жыл бұрын

Amazing

@vladimirmer8027 3 жыл бұрын

Просто и работает. Возьму это устройство себе на вооружение.

@deltafour1212 Жыл бұрын

KISS principal at its finest

@nsexplainhindi2.O 5 жыл бұрын

Nyc work

@tinamarie4875 3 жыл бұрын

I'd make sure the washer's outside diameter is very large which will help use a wrench to tighten the nut. If its too small, you will struggle using a wrench.

@user-in8dk1ds5z Жыл бұрын

Можно ключ с трешеткой одевать

@robbyv.526 2 жыл бұрын

Bolt that vice onto something solid bud !

@cutweldngrind 3 жыл бұрын

I'm giving a plasma cutter on my channel and 1st project was a tool similar to this. Mine is diffrent but this looks nice.

@antiquegeek 8 ай бұрын

A great example of a tool that anyone can make and have in their toolbox. Super simple to build with cheap and easy-to-get parts. It might be a bit slower to use than the more expensive builds but no fancy building tools are needed and for the person who might use it only once in awhile, it is all they need. Well done for breaking it down to the very basics of function to get the job done.

@CreativeToolMistry 8 ай бұрын

Absolutely!

@__-hh3gt 5 жыл бұрын

Good tool. Thanks for your help. But why they don’t manufacture it commercially by China industrial?

@mohabatkhanmalak1161 4 жыл бұрын

They do, check on amazon, ebay. But they are costly.

@awaitingthetrumpetcall4529 3 жыл бұрын

Jola76 posted this design August 15, 2017.

@MrMawnster 2 жыл бұрын

You lift a file on the back stroke. You dont saw back and forth

@avflyguy 3 жыл бұрын

That's nice but unless you double loop it around, that won't hold any significant pressure for very long. Need also to use a stainless high tension lock wire/safety wire of aviation grade. Diameter of .032 is easiest to work with. In a pinch though ( no pun intended) nice gadget for a quick clamp technique.

@MrMawnster 2 жыл бұрын

Double half hitch it. Not single.

@pappaclutch3266 4 жыл бұрын

DUDE THANK YOU! 🙏

@erniemenard7727 3 ай бұрын

I knew I could skip this video because of the words 'hose clamp' and the photo of a guy drawing on a washer with a Sharpie.

@MrNovruz 5 жыл бұрын

Cool

@CreativeToolMistry 5 жыл бұрын

Thanks dear

@andresayala5781 3 жыл бұрын

Mi pregunta porq usan guantes? Ni yo q jalo en la obra los uso y si salen grietas con glicerina o hasta con miadosvse las cura uno por favor no sean tan finos

@johnknight375 Жыл бұрын

1. Go to hardware store 2. Purchase HOSE CLAMP 3. Apply hose clamp 4. Go grab a beer, the job's done ...

@ngovinhtuong 3 жыл бұрын

The vise too loose!

@viswanathanramakrishnan7613 4 жыл бұрын

I have made it but the results are not good. Will you please specify the bolt size with nut and the washer size: further I wish you to help me on the following :- 1.The depth of the cut and width of the cut in the bolt. 2. V shaped cut in the washer details as above. Since I made it with the available material perhaps my these things would have been overlooked. Also please guide me the spanner I need for tightening. Thanks

@ezequielsaucedo260 3 жыл бұрын

I personally would grind down the tip to about eighth of an inch. Try holding the boat with some vice grips as you turn the nut with a wrench. I think you would have great success. I am going to make one as I described. Make sure you have a wide enough washer so you could turn the bolt with a wrench.

@griffon3275 3 жыл бұрын

cheap alternative to use in a pinch for that once in a great while need to make a hose clamp but like others have said 2 loops are better then one and this would / does take at least ten times longer then the clamp tight tool as using the wrench for ever qtr turn eats a lot of time. Still with that said gonna order the proper stainless wire and make this tool or one of others I have seen and use the best design. since this is made up of crap I got lying around making this only eats up time not money. would have to store this tool taped to the wire because over the years just looking at it i would forget what it was for ?