Amazon Ford LED puddle lights install. Improve your vehicles look! Cheap Too!

Рет қаралды 34,341

6 жыл бұрын

In this video I'll show you how to install some new, updated LED Puddle lights on my 2012 Ford Explorer. A very simple install and improvement for you vehicle.
Link to buy - www.amazon.com/gp/product/B07...

Пікірлер: 49

@fortunatedad7695 8 ай бұрын

I just installed these and they are definitely an upgrade. Keep it simple plug the new lights, hit the unlock button, if they don't light up switch the connections. No need to pull out the meter. Thanks for the video

@macuser7080 5 жыл бұрын

Notes about corrosion and determining polarity, that’s the kind of video I like. Very professional sir!

@bigmann120 5 жыл бұрын

Thank you

@rhurtadorh32 Жыл бұрын

Nice explorer. One quick question have you had any water pump issues on your explorer? I see you have 84k miles on it.

@bigmann120 11 ай бұрын

@@rhurtadorh32 I think my engine is a newer one even though the miles are high at the time of this video. I’m going to think my miles are probably 30,000 less than what’s pictured. now I have 150,000+ miles on my car and still don’t have a problem with the water pump, at least not yet.

@CLOCKIN6675 2 жыл бұрын

Very well done video Sir. Saw another vid where the was like removing the mirror facing and drilling and stuff. Felt a little better after watching this one. Thanks

@ronjonesinsightonly-noinsanity 5 жыл бұрын

Thanks for the video, it was helpful and appreciated.

@estebangarcia8202 2 жыл бұрын

I was trying to put other types of led and they did not work later I looked for and found your video thank you very much for the information I am waiting for them to arrive to install them in my wife's ford fusion 2015 great video👍🏼🙏🏼⚪️

@myboringadventures 4 жыл бұрын

Great video. Can't wait to pick up my Fusion,and do this. I like how you mention the smoke 😂 I always hate letting the factory installed smoke out of electrical stuff...lol

@harveyyarbrough2830 4 жыл бұрын

Bigmann, Amazon just delivered the exact same puddle lights for my 2018 flex. Thanks for the informative vid.

@bigmann120 4 жыл бұрын

Harvey Yarbrough Cool! Glad to help.

@germsman7226 3 жыл бұрын

I love this led light. I just got me a 2013 FORD F-150 and I’m changing all lights to LED inside too. Next mod is HID headlights.

@richhansenclan 5 жыл бұрын

Awesome video. I just bought these lights off your recommendation. Thanks

@ardz409 5 жыл бұрын

what's the verdict on the lights?

@bigmann120 5 жыл бұрын

Still working good! Happy I upgraded!

@drfrancov 3 жыл бұрын

Great video. I'm sold. Bought them lights on Amazon. Thanks.

@Malcomb35 Жыл бұрын

They stop working yet?

@Zerhya 5 жыл бұрын

I dig the in depth information

@joeg.1119 4 жыл бұрын

I took em off from my Ford Fusion titanium but gr8 video im gonna buy them and put em in

@driven1300 2 жыл бұрын

I got these.. they worked great... I wanted the lincoln logo on the light.. I order new one from ebay.. works great really classy.. they make one with Ford logo too.. they are the same

@renaldy75 3 жыл бұрын

Very Helpful video... Thanks

@sal5231 3 жыл бұрын

I wanted to see smoke lol 😂 great video thanks

@joemiller2057 3 жыл бұрын

Great job I want to order them for my 2018 Ford Taurus

@JohnSmith-et1vx 4 жыл бұрын

I bought these are exact puddle lights but in blue and they only come on for one second tried wired boths ways still only stay on for one second if not half a second

@Globerson 3 жыл бұрын

Sweet Pebble Time, love that watch

@bigmann120 3 жыл бұрын

I know. I hated it when they got bought. I thought it was close to a perfect smartwatch.

@kylevogt2240 5 жыл бұрын

if u hook the wrong ones could it short out your lights or will it just not turn on then you switch them. i dont have a cable tester

@bigmann120 5 жыл бұрын

I'm not sure but my thought is the LED would just not turn on. I would not worry about the vehicles power side because its fused and possibly circuit protected. To be sure, just buy a cheap digital multi-meter from Harbor Freight Tools or Walmart. Turn on the lights and touch the red and black meter leads to the connections and read the meter. If there is a negitive (-) symbol on the screen, switch the colors around until you get no (-). The red will be positive and black will be negitive. hope this helps.

@craighayes1982 3 жыл бұрын

When you replaced these did it throw any lights on the dashboard like lightbulb out. I’m wanting to replace my expedition license plate and puddle mirrors

@bigmann120 3 жыл бұрын

No everything is good. I have no canbus errors or bulb out warning lights.

@craighayes1982 3 жыл бұрын

@@bigmann120 thanks buddy for the heads up Going to order mine now

@spotonndiyvids6065 5 жыл бұрын

Why does my 2013 fusion titanium hyper flash after installing these I tried reversing polarity and still flashes any ideas all terminals are clean Oem bulb works perfect ?

@bigmann120 5 жыл бұрын

Probably has something to do with the lack of a load these LED's produce. The Oem bulbs have more of a load. The Body control module (BCM) sees LED'S and thinks the light is burned out. You could try a load resistor or a capacitor wired across both terminals.

@alextran8188 5 жыл бұрын

Use forscan to bypass it

@bigmann120 5 жыл бұрын

@@alextran8188 True. I thought of that but IDK if he is willing to buy an OBD adapter w/ MS hi-low canbus and get a extended license for Forscan. I will truly help with that if you want to go that route @Vq35 Master DIY.

@ghimiciandrei 3 жыл бұрын

Link with the Puddle light product? i want to buy...

@bigmann120 3 жыл бұрын

www.amazon.com/gp/product/B07CJG56XJ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

@joeyalent4974 4 жыл бұрын

Do these lights stay on while you drive at night with your headlights on?

@bigmann120 4 жыл бұрын

No but wish they did sometimes.

@rellohz2755 3 жыл бұрын

My puddle light keeps flicker now. I changed it to Red LEDs and whenever the puddle lights come on they flicker red, how do I make them solid instead?

@fortunatedad7695 8 ай бұрын

You might have a loose connection. When I swapped mine out the female connection didn't make a snug connection. All you need to do is use a set of pliers to squeeze the connector together just a little so when you connect the male end it has a tight connection.

@larrybjones2005 Жыл бұрын

When I installed mine, instead of fading, they flicker?

@fortunatedad7695 8 ай бұрын

@christianarroyo5138 5 жыл бұрын

Smoke??

@prince7p268 Жыл бұрын

Yo how do you remove that corrosion

@bigmann120 3 ай бұрын

WD40 and a wire brush for terminals. If the wire is hard, you'll have to change out the terminal and wire.

@Imvps100 3 жыл бұрын

I feel ya pain bro

@Orionwatch 4 жыл бұрын

Talk to much. Just show how to do the changeout without excessive commentary.

@bigmann120 4 жыл бұрын

You can always just scrub through the video if that works for you. Funny how everyone else appreciated the explanation and detail. I'm just trying to help you correctly install the puddle lights. If I talk too much there are millions of other videos on KZfaq. Your negative comments are not needed here.