Can u drop link of that kit your brought

Actually my daughter was the camera person for this video. Lol

Thank you and Im glad it helped!

If you’re talking about a light bar for just light, you could wire that into your reverse light and it would come on when you’re in reverse. However if you want it to be able to be toggled off and on, that will take some wiring.

9️⃣

It lasted without issue for the rest of the time I kept the truck. Which was several month and thru a winter.

Did the magnetic tape work?

Yes, it's perfect!!!!

Yes I made a wire loom and spliced using solder and heat-shrink into the tail light loom and everything works great.

no i didnt install any other components, I basically hooked the light up to my connector for my trailer and it took care of the rest.

No just measure the inside spot and see how much you need

I bought the exact same z moon bar and connected it to the 4 pin.

Im not an apprentice that much anymore. I came up with the name because when i started at the shop because I was still in school at the time. When I was at that point, I was doing a lot of simple jobs (oil changes, brakes, etc) until i got the education under my belt. Im now a full time mechanic.

@@CaptainRon1 when you were an apprentice what was it like? what jobs did you do?

I would have to ask Kyle where he got it. Soon as I have an answer, ill let you know

@@CaptainRon1 no answer yet eh

Yes it is. Both arms.

If they wired it to your trailer hitch, then they could have something wired incorrectly.

They wired it to the driver side tail light. And the reverse light is ran to the passenger side.

@@kenwilson2314 it needs to be wired to the trailer harness.

@@SiriFam you can do that if you want it to pop codes every 2 seconds.

@@kenwilson2314 No codes i hardwired my nilight tr04 to trailer wires. 2019 ram.

Well for as long as I had the truck I had zero issues with it. I sold the truck but have seen it recently and the light bar is still going strong!

@@CaptainRon1 thank you so much!!

Hi Hector, If it is the plastic piece in the center of the placement area you can remove it! All it dose is cover some holes in the body.

@@davidmedcalf9358 yes it is a black plastic in the middle and since that can be removed where do I buy Zmoon strip for that same price?

You can purchase from Amazon don’t know price. Sorry

You could splice the wires into the tail lights directly according to the wiring of the light bar.

If you’re getting power to either the trailer adapter or your brake lights then no

One of the problems I have with it is that the turn signals are amber, And almost all American vehicles use red turn signals! This light bar would look good on a Import truck because they use amber turn signals!

His did to whe he hit the brake

Yes, this seems to be an issue with some of these cheaper light bars where they have not spent the extra. How they are usually wired is the brake light is attached to both right and left turn signal wires too so if it sees constant power (not intermittent power - hazard) it lights the red. I would guess there is some error/issue on the logic circuits that processes the signal first before doing the checks to see which should be lit... So you get yellow light and then the red instead of just red alone. The opt7 bar doesn't have this problem.

I’m about to do that on mine today

Yep

KZfaq search - Rustbelt Mechanic

Honestly it wasn't that hard to do with the tailgate on.

Glad to hear you're so close minded about tattoos. Thanks for watching my video.

I think they are awesome! Your just jelly lol