Gosh, i wish the plumber installed the toilet the way you did. the way you did that pipe makes the installation look so nice and makes the job look clean
@ChuckBarron3 жыл бұрын
Thanks 👍
@dannyburriss3835 жыл бұрын
Finally, the escutcheon. Thank you!!!
@ChuckBarron5 жыл бұрын
I know. lol
@andy-jac5 жыл бұрын
Good job. I gotta tell you, I really don't like 3" "dump valves/flappers. Designed for 1.8 GPF. I've had a lot of problems with them, and users hate to have to hold the handle down to get a decent flush. -
@ChuckBarron5 жыл бұрын
gerber toilets for me all day long. Not my choice here.
@OCC_Plumbing_and_Restorations4 жыл бұрын
I despise those
@plumbbuild65175 жыл бұрын
Like the chrome solid lines better than braided on some applications great job CB
@ChuckBarron5 жыл бұрын
yes. i use to have a real supply pipe bender. Thats MIA of course
@alexstoles13395 жыл бұрын
I gave up the cheese saw a long time ago. Multi tool or grinder way faster. Good job chuck!
@andy-jac5 жыл бұрын
I use a Dremel with a heavy duty grinder wheel. It works great as a cut off saw.
@ChuckBarron5 жыл бұрын
Gotta get me one
@ChuckBarron5 жыл бұрын
my wrist still hurts....lol
@throttlebottle59065 жыл бұрын
BBZZZZZZZZZZZZZZT, done.... hold the nut with pliers so it doesn't oscillate the bolt/nut to death....
@throttlebottle59065 жыл бұрын
@@ChuckBarron you have the multi-tool.......... just make sure you have a metal blade in it ( the obnoxious loud vibrator tool) lol
@RichTheitalianplumber5 жыл бұрын
nothing like set - fast johhny bolts its all i use . nice work cb
@ChuckBarron5 жыл бұрын
for sure Rich
@306foxbody5 жыл бұрын
I like to use the set fast Johnny bolts there 5/16 and adjustable no cutting love them
@andy-jac5 жыл бұрын
Yeah, you might as well get those and the repositional green ring (Sani-something at Home Depot) and a metal rod flush handle when you pick up a new toilet these days. And oh, probably a wooden lid also. Many new ones have flimsy plastic parts.
@ChuckBarron5 жыл бұрын
johnny for me too...i used supplied bolts this day.
@ChuckBarron5 жыл бұрын
i here ya plumber
@throttlebottle59065 жыл бұрын
@@andy-jac plastic throne seat/lid is OK, IF they are the least bit comfy, very poor designs by collegiate stooges that shouldn't have an engineer degree, let alone a license to drive....
@duanemiller95265 жыл бұрын
We like to caulk toilet around base with !00 percent clear silicone
@ChuckBarron5 жыл бұрын
Yes. I think thats better. Clear is good.
@harryballsacky3 жыл бұрын
SHITTERS IN
@ChuckBarron3 жыл бұрын
lol
@keithbrueton5 жыл бұрын
YAH he finally got the joker wrench nice one CB
@ChuckBarron5 жыл бұрын
yes.
@throttlebottle59065 жыл бұрын
if you "spin" those silly plastic push-nuts after pushing them down, they will run down the threads and tighten up some, alternate push them down fully and bend the edge up and jam them in place.
@ChuckBarron5 жыл бұрын
love me some johhny bolts. i been spoiled.
@throttlebottle59065 жыл бұрын
for years we always bought two sets and robbed the nuts and washers or get bags of regular nuts and washers, then bolt them tight to the flange. the spare bolts left over worked nice for when you "stooged" the wax on new installs lol
@brewmule67995 жыл бұрын
I used double nut johnny bolts. That way I can tighten the johnny bolts to the flange. It keeps them straight and if you ever have to pull the toilet the whole bolt won’t just spin
@ChuckBarron5 жыл бұрын
Nice..
@armandomadrigal97935 жыл бұрын
Cb even better then that ratchet is the pass thru sockets. i have and use the ratchet , but i prefer the pass thru socket set
@ChuckBarron5 жыл бұрын
more tools...love it
@dannyburriss3835 жыл бұрын
Just use a pair of electrical linesman pliers to cut the bolts. Easy peasy
@alexstoles13395 жыл бұрын
If bolts are brass wont be bad but if there that cheesey rainbow looking metal prolly be hard to cut and shoot like a rocket and crack toilet. Lol that would be cb luck
@andy-jac5 жыл бұрын
Good idea. I also have a 10" bolt cutter that's now out new new.
@ChuckBarron5 жыл бұрын
was gonna dremel them but did not want run electric.. next step is battery operated dremel
@ChuckBarron5 жыл бұрын
oh for sure.
@ChuckBarron5 жыл бұрын
what about removing nut in case of reset....does it booger the threads?
@johnkrim83775 жыл бұрын
What about the copper stub for the water supply, I'm pretty sure the I.P.C. calls for all exposed piping in a bathroom to be chrome finish for ease of cleaning and cleanliness ??
@ChuckBarron5 жыл бұрын
this gentleman is suppose to change temporary valves he had of for a year now...i kept it moving.
@throttlebottle59065 жыл бұрын
slap some foil tape on LOL..............................................
@throttlebottle59065 жыл бұрын
I always go with nut driver on the flange to bowl nuts, I can easily break a toilet that way if I wanted too, I think it's much easier when rushing and stressed to not think about breaking them :)
@ChuckBarron5 жыл бұрын
ya know i was thinking the same as i cranked it down.....this is an easy way to crack some china
@kevinruggerio17965 жыл бұрын
Wow, had to laugh when the glasses fell off!! Mine do the same thing and I don’t particularly like lining the toilets up. 😆😆
@ChuckBarron5 жыл бұрын
lol....hate that but it happens alot.
@MrTooTechnical5 жыл бұрын
beautiful one piece toilets. no leaky leaky. lates
@ChuckBarron5 жыл бұрын
gerber is where its at in my opinion.
@dewaltpropicture99095 жыл бұрын
I always install toilet on Plaster . Rock solid and never moves. Old shool🤙🤙🤙
@ChuckBarron5 жыл бұрын
I have never tried it. how long till it sets up?
@dewaltpropicture99095 жыл бұрын
Rock solid in 4 minutes. Best way to install toilet
@ChuckBarron5 жыл бұрын
Thank you.....gonna do it next toilet set. especially in a bar bath
@midwestdipper5 жыл бұрын
CB1, 2nd year apprentice here, what is that spring tool you put around the rigid chrome toilet supply? We do a lot of high end new construction houses and we use rigid supplies all the time and I would love to pick one of those up!
@ChuckBarron5 жыл бұрын
Bending spring. they come in variety of sizes.
@jeffcoolhd5 жыл бұрын
CB-1 good install. I would have sanded the paint off the copper pipe. Peace brother
@ChuckBarron5 жыл бұрын
The prince was to replace the valves...I was told to hook up and keep it moving. no worries...lol
@keithbrueton5 жыл бұрын
You still at that place CB1
@ChuckBarron5 жыл бұрын
all but done....a slow running job for sure.
@joehyundaitech79614 жыл бұрын
hi chuck great job as usual. what size ratchet wrench was that?
@ChuckBarron3 жыл бұрын
Not sure its been a while.
@Dametime2135 жыл бұрын
With so many other options out there, why use wax rings so much??
@ChuckBarron5 жыл бұрын
I like wax. What do you use? if so do you like them?
@Dametime2135 жыл бұрын
@@ChuckBarron Ive been using the fernco wax free seal, and so far I haven't had any issues. I like them because if the toilet doesn't seal correctly the first time, I can reposition without the mess of a wax ring.. I was just curious is all, keep up the great work I love the vids fam!!
@ChuckBarron5 жыл бұрын
Ya i have never used them yet. I do see your point. Some day i will experiment.
@donthom19244 жыл бұрын
What's the toilet model number?
@ChuckBarron4 жыл бұрын
cannot remember.
@lord4th773 жыл бұрын
Damn it why’d you use the free bolts!!!
@ChuckBarron3 жыл бұрын
man. this one...painful
@slurrkies3 жыл бұрын
Where did you purchase this toilet?
@ChuckBarron3 жыл бұрын
Awesome.....do it .
@slurrkies3 жыл бұрын
@@ChuckBarron I have one already in bone colour that I got in 2006, i've been looking for ever. Where did you buy it?
@thepinkdiamonds83703 жыл бұрын
Great video! What is your favorite toilet that you would recommend either a two piece or one piece with the best flush. Thanks
@floydalbright12145 жыл бұрын
I never cut bolts until I add water and flush , just in case we have a wax ring problem .
@ChuckBarron5 жыл бұрын
i hear ya floyd
@m.3bd5 жыл бұрын
Hey CB2! "In my country!" Hahaha
@ChuckBarron5 жыл бұрын
George is the Lebanese Prince.
@m.3bd5 жыл бұрын
LOL
@throttlebottle59065 жыл бұрын
that chrome pipe will leak,once the moron tenants start to toss their fat rumps around on the throne, as will the flange seal lol. then when cleaning (if they do) you'll be lucky they don't break the nut at fill valve or the fill valve itself (seen it before) lol
@ChuckBarron5 жыл бұрын
or use it as a football to kick.
@angelisone3 жыл бұрын
ATG suggests do not buy the one piece toilet, unless you want to hurt your back. Chuck Barron, you are not getting younger so one mistake & you got back pain for life. An easy installation of just $65.00. My daughter quit from $16/hr Costco and doing this. Many plumbers CAN NOT beat my daughter's price for helping homeowners during COVID-19. For offices, only $200/set.
@ChuckBarron3 жыл бұрын
not sure what you mean.
@angelisone3 жыл бұрын
@@ChuckBarron You mean you don't care about your back or hit homeowners over $150.00?
@throttlebottle59065 жыл бұрын
when I hear ""in my country"" I let them go on, then I reply, ""if it's so great, then why did you leave it and come here"" hen they go on about it blah blah, when finished I suggest they return ;)